Digi-Code DC-5135 433 MHz Commercial Open/Close/Stop Receiver
The Digi-Code DC-5135 is a commercial open/close/stop radio receiver operating at 433 MHz. Unlike a standard one-button garage remote receiver, this receiver is intended for operators that support separate open, close, and stop control inputs. It is commonly used on commercial overhead door operators and certain gate or access-control applications where a three-button radio station is needed.
The DC-5135 is designed to work with the Digi-Code DC-5035 transmitter. Once learned, the receiver responds to the transmitter open, close, and stop buttons and provides the appropriate relay outputs to the operator control circuit. Because it interfaces with operator control wiring, voltage and terminal function matter. This is not a plug-in universal residential garage receiver and should be matched to the operator wiring diagram before installation.
Compatible With
- Digi-Code DC-5035 433 MHz open/close/stop transmitter
- Commercial door operators with separate open, close, and stop low-voltage control inputs
- Gate operators with compatible open, close, and stop control terminals where allowed by the operator manufacturer
- Applications requiring 433 MHz radio control to reduce interference from 300 MHz open/close/stop systems
- Installations using 24 VAC/VDC control power for the receiver
- Systems that can accept three independent relay outputs from a radio receiver
- Compatible installations where the receiver antenna can use a coaxial Type F connector
- Digi-Code DC-5165 433 MHz antenna extension accessory when a remote antenna is needed
Features and Specifications
| Manufacturer | Digi-Code |
|---|
| Product Type | Commercial open/close/stop receiver |
|---|
| Part Number | DC-5135 / 5135 |
|---|
| Frequency | 433 MHz |
|---|
| Control Functions | Open, Close, Stop |
|---|
| Output Type | Three independent relay outputs |
|---|
| Programming | Teach/Learn button |
|---|
| Power | 24 VAC/VDC |
|---|
| Antenna Connection | Coaxial Type F |
|---|
| Compatible Transmitter | Digi-Code DC-5035 |
|---|
| Application | Commercial door and select gate operator control circuits |
|---|
Also Known As / Related Part Numbers
- 5135
- DC-5135
- DC5135
- Digi-Code 5135
- Digi-Code DC-5135
- Digi-Code DC5135
- 72-5135
- RC DC5135
- DC-5035
- DC5035
- Digi-Code 5035
- Digi-Code DC-5165
- DC-5165
- 433 MHz O/C/S receiver
- Open Close Stop receiver
- Commercial OCS receiver
Common Replacement or Use Cases
- Need radio open/close/stop control on a commercial operator
- Existing 300 MHz O/C/S system has interference issues
- Receiver needs separate outputs for open, close, and stop commands
- Customer is pairing a DC-5035 transmitter with a compatible receiver
Technician Note
The DC-5135 should be wired to the operator control terminals, not across high-voltage motor wiring. Verify common, open, close, stop, and 24V control power on the operator diagram before installation.
Before Ordering
- Confirm the operator supports separate open, close, and stop inputs
- Confirm 24 VAC/VDC control power is available
- Confirm the transmitter being used is Digi-Code DC-5035
- Confirm the antenna accessory needed is for 433 MHz, not 300/310 MHz
- Review the operator wiring diagram before connecting relay outputs
Professional Advisory
Commercial operator wiring should be handled by a qualified door or gate technician. Do not bypass stop circuits, entrapment protection, monitored safety devices, or required control-station functions.
Important Ordering Warnings
- Not a standard single-button residential receiver
- Not compatible with 300 MHz Digi-Code or Multi-Code remotes
- Open/close/stop relay wiring must match the operator control circuit
Product Questions and Answers
What transmitter works with the DC-5135?
The DC-5135 is designed to work with the Digi-Code DC-5035 433 MHz open/close/stop transmitter.
What voltage powers the DC-5135?
The receiver is commonly listed for 24 VAC/VDC control power.
Does the DC-5135 have separate open, close, and stop outputs?
Yes. It provides separate relay outputs for open, close, and stop functions on compatible operators.
Can this replace a one-button receiver?
Not usually. This is an open/close/stop receiver for operators that support separate control inputs, not a simple single-channel receiver.
Which antenna kit is related to this receiver?
The 433 MHz open/close/stop receiver family is associated with the Digi-Code DC-5165 433 MHz antenna extension, not the DC-5166 300/310 MHz kit.
