Digi-Code Receiver 5102 DC5012 Multi-code Compatible 309013 Garage Gate Opener Receiver
The Digi-Code DC-5102 is a 310 MHz receiver used on compatible garage door openers and gate operators that use the older Stanley style fixed-code radio format. It is normally selected when a customer has a working operator but the receiver section is missing, damaged, or no longer responding to matching DIP switch transmitters. The 3-tab mounting style is intended for fast connection on operators with the proper three-terminal receiver layout, and the receiver can also be used with the correct push-on harness or remote-mount setup where the installation allows it.
This is not the same item as a DC-5012 transmitter. The DC-5102 is the receiver that listens for a 310 MHz fixed-code remote signal and sends the open command to the operator. The installer should match the receiver frequency, terminal style, code-switch format, and the existing remote family. It is most useful for legacy Stanley and Digi-Code 310 MHz systems that still use 10-position DIP switch coding rather than rolling-code or learn-button technology.
Compatible With
- Digi-Code 310 MHz 10 DIP switch transmitter families such as DC-5012, DC-5032, DC-5042, DC-5062, DC-5072, and DC-5202 when programmed to the same code.
- Stanley 1016, 1018, 1027, 1037, 1038, 1040, 1044, 1047, 1049, 1050, 1050-15, 1076, 1079, 1082, 1094, 1097, 1100, 24911, 51-4271, 51-4272, 51-4273, 51-4369, and 51-4726 where the opener uses 310 MHz fixed-code DIP switch radio control
- Stanley compatible dealer opener models 5100, 5105, 5170, 5300SD, 5350, 5360, 5400 w/r, 7000, 7005, 7100, 7105, 7200, 7205, 7270, 7400, 7405, T120, T125, T130, T135, T140, and T145 when equipped with the matching 310 MHz Stanley style receiver
- Compatible three-terminal garage door operators that accept a 310 MHz Stanley style external receiver.
- Select gate operators or access-control panels using a dry-contact style receiver connection when powered and wired correctly.
Features and Specifications
| Manufacturer | Digi-Code |
|---|
| Product Type | 3-tab garage door / gate radio receiver |
|---|
| Part Number | 5102 / DC-5102 |
|---|
| Application | Adds or replaces receiver control for compatible 310 MHz fixed-code systems |
|---|
| Frequency | 310 MHz |
|---|
| Code Format | 10-position DIP switch fixed code, 1,024 possible combinations |
|---|
| Mounting / Connection | 3-tab operator connection; may support push-on harness or remote mounting depending on installation |
|---|
| Common Use | Legacy Stanley style garage door opener and compatible gate receiver applications |
|---|
| Notes | Not a rolling-code receiver and not a universal modern learn-button receiver |
|---|
Also Known As / Related Part Numbers
- 5102
- DC5102
- DC-5102
- 309013
- Digi-Code 5102
- Digi-Code DC-5102
- Related transmitter reference: DC-5012 / 5012, but that number is not the receiver itself
Technician Note
Before replacing the receiver, check that the existing remote is actually transmitting on 310 MHz and that the operator terminals provide the correct connection. A mismatched 300 MHz Multi-Code remote, 318 MHz MegaCode remote, or modern rolling-code transmitter will not program to this receiver.
Before Ordering
- Confirm the installed system uses 310 MHz fixed-code Stanley style radio control.
- Match the 10 DIP switch settings between the receiver and transmitter.
- Confirm the operator has the correct three-terminal receiver connection or proper harness setup.
- Do not order this receiver if the system uses 300 MHz Multi-Code, 310 MHz Delta 3, Security Plus, MegaCode, or a rolling-code receiver.
Professional Advisory
Disconnect power before receiver installation or wiring. If the opener has unsafe movement, damaged wiring, or missing safety devices, have the system checked by a qualified garage door or gate technician.
Important Ordering Warnings
The uploaded product name includes DC5012 wording. DC-5012 is commonly a 310 MHz transmitter, while this product row has mfgid 5102 and has been written as the DC-5102 receiver.
Product Questions and Answers
Is the Digi-Code 5102 a remote or a receiver?
The 5102 / DC-5102 is a receiver. It listens for a compatible 310 MHz fixed-code transmitter and sends a command to the operator.
Will this receiver work with a 300 MHz Multi-Code remote?
No. The DC-5102 is a 310 MHz receiver. A 300 MHz Multi-Code remote normally requires a 300 MHz receiver such as a DC-5100 style receiver.
Which remotes are commonly used with this receiver?
Common matching remotes include Digi-Code DC-5012, DC-5032, DC-5062, DC-5072, and DC-5202 keypad models when they are set to the same 10 DIP switch code.
Does this work with rolling-code openers?
No. This is a fixed-code DIP switch receiver and should not be used as a replacement for modern rolling-code receiver systems.
Why does the product name mention DC5012?
DC5012 is commonly a related transmitter number. The receiver in this row is the 5102 / DC-5102, so the part label should be checked before upload or shipment.
