Products [25]
 433mhz transmitter remote control clicker.jpeg)
Digi-Code
Digi-Code Remotes, Keypads, Receivers & Radio Controls
Digi-Code products are used with compatible gate operators, garage door openers, access control systems, and radio receiver setups where a remote, keypad, or transmitter is needed to send an open command. At Gate Openers Unlimited, this page helps customers find Digi-Code remote controls, visor transmitters, keychain remotes, wireless keypads, radio receivers, replacement receiver kits, and related access control radio products.
When choosing a Digi-Code product, start with the radio frequency and the receiver already installed. Many Digi-Code remotes and keypads are made for specific 300 MHz or 310 MHz systems, and the DIP switch or coding style must match the receiver. Similar-looking remotes may not work if the frequency, coding format, or receiver type is different.
Digi-Code Radio Control Products
Digi-Code is known for radio control products used with select gate and garage door opener systems. Depending on the model, Digi-Code products may include visor-style transmitters, keychain transmitters, wireless keypads, 300 MHz receivers, 310 MHz receivers, dual-frequency receivers, and replacement radio control sets.
For gate and garage applications, Digi-Code products are often used to replace older remotes, add extra transmitters, upgrade an old receiver, or provide keypad entry at a driveway gate or garage door. The correct product depends on the receiver frequency, number of channels, coding method, DIP switch settings, and the opener or gate controller input.
Shop Digi-Code by Product Type
- Gate and garage remote controls
- Visor transmitters
- Keychain transmitters
- Wireless keypads
- Radio receivers
- Replacement receiver and remote kits
- Multi-button transmitters
- DIP switch radio controls
- Access control radio accessories
Common Digi-Code Product Families
| Product Family | Common Use | Ordering Notes |
|---|---|---|
| Digi-Code 5010 / 5040 Series | 300 MHz remote control transmitters for compatible radio receiver systems | Confirm 300 MHz frequency, DIP switch coding, button count, and receiver compatibility before ordering. |
| Digi-Code 5012 / 5032 / 5042 / 5062 Series | 310 MHz transmitters for compatible gate and garage radio systems | Verify 310 MHz frequency, coding style, number of buttons, and whether the existing receiver accepts the transmitter. |
| Digi-Code Keychain Remotes | Compact transmitters for key rings, garages, gates, and multi-user access | Match frequency, button count, DIP switch settings, and compatible receiver before adding or replacing remotes. |
| Digi-Code Wireless Keypads | Keyless entry for compatible gate openers, garage door openers, and receiver systems | Confirm frequency, coding style, keypad model, and receiver compatibility before ordering. |
| Digi-Code Receivers | Receiver replacement or upgrade for compatible gate and garage opener systems | Check voltage, wiring, relay output, frequency, channel count, and opener input requirements before replacing. |
| Digi-Code Receiver/Remote Kits | Adding radio control to an opener or replacing an older receiver and transmitter setup | Verify opener input, receiver power, wiring, relay output, and whether the kit supports the needed remotes. |
How to Choose the Right Digi-Code Product
Start by checking the receiver or existing remote. The most important details are the radio frequency, coding style, DIP switch setting, button count, and whether the device controls one opener or multiple openers. For older systems, matching the frequency and switch code is usually more important than matching the remote’s outer case style.
- For replacement remotes: match the frequency, button count, DIP switch layout, and receiver compatibility.
- For wireless keypads: verify the keypad frequency and coding method before ordering.
- For adding extra users: confirm the existing receiver can accept the same transmitter style and code settings.
- For replacing an old receiver: check the opener’s input terminals, available power, relay output, and whether a receiver kit is a better option.
- For multi-button remotes: confirm each button can be matched to the correct receiver or opener channel.
Before Ordering Digi-Code Remotes or Receivers
- Confirm the frequency of the existing remote or receiver, such as 300 MHz or 310 MHz.
- Check whether the system uses DIP switches, fixed code, rolling code, or another coding method.
- Match the number of buttons or channels needed for the gate, garage door, or second device.
- Check the model number on the existing Digi-Code remote, keypad, or receiver.
- For keypads, verify the keypad model and receiver compatibility before replacing.
- For receivers, confirm voltage, wiring, relay output, mounting location, and opener input requirements.
- Do not assume a remote will work just because it has the same number of buttons or a similar case.
- If the old receiver is no longer available or the frequency is unclear, replacing the receiver and remote together may be the cleaner solution.
Digi-Code Compatibility and Fitment Notes
Digi-Code compatibility depends on the frequency, receiver type, coding method, DIP switch pattern, channel count, and opener input. A 300 MHz Digi-Code transmitter will not work with a 310 MHz receiver unless the receiver is specifically designed to support both frequencies. Likewise, a compatible-looking remote may not work if the coding format is different.
When replacing a Digi-Code remote or keypad, copy the existing switch settings only when the frequency and model type are correct. When replacing a receiver, check the wiring, power supply, relay contacts, and whether the receiver is being connected to a gate operator, garage door opener, access control panel, or commercial control system.
If the receiver is installed inside a gate operator, garage opener, or access control cabinet, have a qualified technician verify the wiring when needed. Do not bypass operator safety devices, photo eyes, reversing edges, safety loops, access control wiring, or required entrapment protection.
Related Digi-Code and Radio Control Categories
- Remote Controls
- Gate Remotes
- Garage Door Remotes
- Wireless Keypads
- Receivers
- Access Control
- Gate Opener Parts
- Garage Opener Parts
- Commercial Gate Operator Accessories
- Replacement Radio Control Kits
South Florida Local Pickup
Gate Openers Unlimited is located in South Florida and offers local pickup from our Hialeah Gardens warehouse when available. This is helpful for local gate technicians, garage door technicians, installers, property managers, HOAs, homeowners, and commercial buyers who need Digi-Code remotes, keypads, receivers, or replacement radio control parts without waiting on standard shipping. Please confirm availability before heading to the warehouse.
Digi-Code FAQ
What are Digi-Code products used for?
Digi-Code products are used for radio control of compatible gate operators, garage door openers, access control systems, and receiver setups. Common products include remotes, keychain transmitters, visor transmitters, wireless keypads, and radio receivers.
What frequency do Digi-Code remotes use?
Many Digi-Code remotes are made for 300 MHz or 310 MHz systems, depending on the model. The remote frequency must match the receiver frequency unless the receiver is specifically designed to support more than one frequency.
Are Digi-Code remotes universal?
No. Digi-Code remotes are not universal across all systems. Compatibility depends on the frequency, coding style, DIP switch settings, receiver type, and opener setup. Always verify the existing remote or receiver before ordering.
How do I program a Digi-Code remote?
Many Digi-Code remotes use DIP switch settings that must match the receiver or existing remote. Some systems may use a different coding method. Check the model number and receiver type before attempting to copy settings or program a replacement.
Can I use a Digi-Code keypad with my gate opener?
Select Digi-Code wireless keypads may work with compatible gate or garage receiver systems. The keypad must match the receiver frequency and coding style. Verify compatibility before ordering a replacement keypad.
What should I check before replacing a Digi-Code receiver?
Check the receiver frequency, voltage, wiring, relay output, number of channels, mounting location, and the opener or gate controller input. If the old radio system is unclear, replacing the receiver and matching remotes together may be easier.
Can Digi-Code remotes control both a gate and garage door?
Some multi-button Digi-Code remotes may control more than one compatible receiver or opener channel. Each button must be matched to the correct receiver frequency and coding setup for the gate or garage door.
Why does my Digi-Code remote not work?
A Digi-Code remote may not work because of the wrong frequency, incorrect DIP switch settings, dead battery, incompatible receiver, damaged transmitter, receiver wiring problem, weak range, or a failed opener input. Check the remote and receiver before replacing parts.
