EMX CR-2000 WATERPROOF WIEGAND CARD READER / KEYPAD VANDAL RESISTANT GATE ENTRY
The EMX CR-2000 is a waterproof Wiegand card reader and keypad for controlled gate, door, and barrier-arm entry points. It is built for higher-traffic exterior access locations where the installer wants both credential and keypad options in a vandal-resistant housing. The unit supports card access, passcode access, or combined card/code operation depending on how the site is programmed. For gated communities, commercial yards, shop entrances, and storage properties, the CR-2000 can provide local access control while also giving compatible access panels a Wiegand output for user monitoring. This part should be selected around the access-control method already used on the property. It is not a universal receiver and does not replace a telephone entry board, loop detector, safety photo eye, or gate operator control board.
Compatible With
Compatible with access-control systems, gate operators, door controllers, and barrier gate installations that can use Wiegand and/or relay access-control outputs. Commonly paired with compatible EMX proximity cards and used on exterior keypad pedestals, gooseneck stands, wall-mounted gate entries, and commercial door/gate access points. May be used for doors, gates, and barrier arms when power, output, code/card programming, and controller input requirements are confirmed. Verify whether the job requires Mifare/contactless smart card credentials, EMX-compatible cards, or a specific Wiegand format before ordering credentials or replacement readers.
Features and Specifications
| Manufacturer | EMX Industries |
|---|
| Product Type | Waterproof Wiegand card reader/keypad |
|---|
| Part Number | CR-2000 |
|---|
| Application | Gate, door, and barrier access control |
|---|
| Users | Up to 2000 users by card and/or passcode |
|---|
| Output | Wiegand and relay outputs |
|---|
| Power | 9-25 VDC / commonly listed low standby current |
|---|
| Housing | Waterproof, vandal-resistant metal body |
|---|
| Features | Back-lit keypad, tamper alarm, short-circuit protection, user access monitoring |
|---|
Also Known As / Related Part Numbers
CR-2000; CR2000; EMX CR-2000; EMX-5401-1; EMX 5401-1; waterproof Wiegand reader keypad; EMX card reader keypad; CARX-20 related proximity access cards; EMX proximity smart cards.
Technician Note
Match this item by exact model number, wiring method, monitoring method, voltage, and the operator or access-control input being used. Similar EMX access-control and photoeye parts can look alike but may use different outputs, ranges, credentials, or monitored safety methods.
Before Ordering
- Confirm the original EMX part number or the exact product family on the installed system.
- Verify voltage, wiring, relay/Wiegand output, and monitored safety requirements before replacing a sensor or access device.
- Check mounting location, enclosure style, beam path, reflector layout, and environmental exposure.
- For photoeyes, confirm whether the operator requires monitored UL325 entrapment protection.
- For access-control products, confirm credential format, user capacity, and controller input type.
Professional Advisory
Gate and door safety devices must be installed and tested according to the operator manufacturer's instructions and all applicable safety standards. Do not bypass required photoeyes, edges, or monitored safety circuits. High-voltage wiring, hazardous-location wiring, and unsafe gate movement should be handled by a qualified gate, door, or electrical technician.
Product Questions and Answers
What is the CR-2000 used for?
The CR-2000 is used as a waterproof card reader/keypad for controlling access at gates, doors, and barrier arms.
Can users enter by card or code?
Yes. The CR-2000 supports card and passcode access, and programming can allow different combinations depending on the site setup.
Does the CR-2000 provide Wiegand output?
Yes. It is commonly used where Wiegand output is needed for user access monitoring through a compatible access-control system.
Is this the same as the PRX-320?
No. Both are EMX reader/keypad products, but CR-2000 and PRX-320 have different housings, programming, specifications, and application details.
What must be verified before replacing an existing reader?
Confirm the reader model, voltage, Wiegand format, credential type, wiring method, relay use, and whether the controller is programmed for card-only, code-only, or card-plus-code access.
