Products [50]
EMX Industries
EMX Industries Loop Detectors, Photo Eyes & Gate Sensors
EMX Industries products are used on automatic gates, overhead doors, parking systems, commercial entrances, drive-through lanes, and access control installations where vehicle detection, safety sensing, or user access control is needed. At Gate Openers Unlimited, this page helps customers find EMX loop detectors, photo eyes, vehicle sensors, safety sensors, keypads, card readers, timers, drive-through alerts, and related gate and door control accessories.
When choosing an EMX product, start with the job the device needs to perform. A loop detector used for vehicle presence is not selected the same way as a monitored photo eye, driveway probe, request sensor, keypad, card reader, or timer. The correct product depends on the model number, voltage, detection method, relay output, wiring style, monitored safety requirements, mounting location, and the gate operator, door operator, access control panel, or parking equipment receiving the signal.
EMX Vehicle Detection, Safety and Access Control Products
EMX Industries is known for access control sensors, vehicle detection products, and gate/door safety devices used by gate technicians, access control installers, overhead door companies, parking system contractors, and commercial property maintenance teams. Depending on the application, EMX products may help detect vehicles, protect a gate or door opening, provide a free-exit signal, trigger an alert, control access by code or credential, or add timing and logic functions to a control system.
For gate and access control applications, EMX products may be used at residential driveways, apartment communities, HOA entrances, storage facilities, commercial yards, parking garages, barrier arm lanes, warehouse doors, and drive-through lanes. The right EMX product depends on the type of opening, traffic pattern, available power, safety requirements, and the input type on the connected equipment.
Shop EMX Industries by Product Type
- Inductive loop vehicle detectors
- Plug-in and terminal-style loop detectors
- Low-voltage and solar-friendly vehicle detectors
- Photo eyes and gate safety sensors
- Retro-reflective and through-beam photo eyes
- Vehicle probes and driveway detection products
- Drive-through alerts and notification systems
- Keypads and card readers
- Programmable timers and control accessories
- Radio controls, receivers, and access control components
Common EMX Industries Product Families
| Product Family | Common Use | Ordering Notes |
|---|---|---|
| D-TEK / ULTRA D-TEK Loop Detectors | Inductive vehicle detection for automatic gates, parking lanes, and access control systems | Confirm voltage, socket or terminal style, loop function, relay output, and whether the detector is used for exit, safety, or presence detection. |
| IRB Photo Eyes | Gate and door safety sensing using infrared beam detection | Verify monitored safety requirements, wiring type, voltage, mounting location, alignment, and operator compatibility. |
| IRB-RET / Retro-Reflective Photo Eyes | Photo eye safety detection where a reflector-style setup is preferred | Confirm reflector placement, detection range, monitored output, environmental conditions, and operator safety input. |
| Vehicle Probe Sensors | Buried probe-style vehicle detection for driveways, gates, and access points | Check probe model, cable length, burial location, detection area, relay output, and connected equipment. |
| Drive-Through Alert Systems | Vehicle notification for drive-through lanes, service areas, and property entrances | Verify sensor type, alert device, wiring or wireless setup, power, and mounting location. |
| Keypads and Card Readers | Access control by PIN code, card, or credential for gates and doors | Confirm output format, voltage, credential type, wiring, weather exposure, and access control panel compatibility. |
| Timers and Control Accessories | Timing, delay, schedule, and auxiliary control functions for access systems | Match voltage, relay output, timing range, enclosure needs, and the system input being controlled. |
How to Choose the Right EMX Product
Start by identifying whether the product is being used for vehicle detection, safety sensing, access control, alert notification, or timing control. For a replacement, match the existing EMX model number and check the connected equipment. For a new installation, choose the product based on the opening type, detection area, wiring path, available voltage, and the function required by the gate, door, or access control system.
- For vehicle loops: choose the detector by voltage, socket or terminal style, relay behavior, and whether the loop is for exit, safety, shadow, arming, or presence detection.
- For photo eyes: verify whether the operator requires monitored safety, then match the photo eye style, voltage, range, wiring, and mounting location.
- For driveway probes: confirm burial location, cable length, detection area, relay output, and whether the system is being used for free exit or notification.
- For keypads and card readers: match the output format, credential type, voltage, wiring, and access control panel requirements.
- For timers and control modules: check the relay output, timing function, voltage, enclosure needs, and the device being controlled.
Before Ordering EMX Industries Products
- Confirm the exact EMX model number when replacing an existing detector, sensor, keypad, reader, or timer.
- Verify whether the product is for vehicle detection, gate safety, door safety, access control, alert notification, or timing control.
- Check voltage, relay output, wiring style, mounting location, and environmental exposure.
- For loop detectors, confirm the loop function, socket style, loop condition, lead-in wire, and operator input.
- For photo eyes, confirm monitored safety requirements, alignment, range, and whether the operator accepts the sensor output.
- For probes and alerts, verify cable length, wireless range when applicable, burial location, and receiver or alert device compatibility.
- For keypads and readers, check credential type, output format, access control panel input, and weather exposure.
- Do not use any vehicle detector or sensor as a substitute for required gate safety devices or monitored entrapment protection.
EMX Compatibility and Fitment Notes
EMX compatibility depends on the exact model, voltage, output type, wiring method, monitoring requirements, detection technology, and the connected gate, door, parking, or access control equipment. Two EMX devices may look similar but have different monitored outputs, relay behavior, ranges, wiring terminals, or safety functions.
When replacing an EMX loop detector, inspect the loop wire, lead-in wire, splices, detector socket, and gate operator input before assuming the detector is the only failed part. When replacing a photo eye or safety sensor, verify the operator’s monitored safety requirements and test the system after installation. When replacing a keypad, reader, timer, or control accessory, confirm the output format and wiring before ordering.
If the EMX product is connected to a gate operator, overhead door operator, access control panel, maglock, electric strike, fire access system, parking controller, or commercial control system, have a qualified technician verify wiring and operation. Do not bypass monitored photo eyes, safety edges, loops, reversing devices, required entrapment protection, or code-required egress hardware.
Related EMX Industries and Access Control Categories
- Vehicle Detection
- Loop Detectors
- Gate Safety Devices
- Photo Eyes and Safety Sensors
- Driveway Alert Systems
- Free Exit Devices
- Access Control
- Keypads
- Card Readers
- Timers and Control Accessories
- Commercial Gate Operator Accessories
- Overhead Door Safety Sensors
South Florida Local Pickup
Gate Openers Unlimited is located in South Florida and offers local pickup from our Hialeah Gardens warehouse when available. This is helpful for local gate technicians, door technicians, access control installers, parking system contractors, property managers, HOAs, facility maintenance teams, and commercial buyers who need EMX loop detectors, photo eyes, sensors, keypads, readers, timers, or related access control products without waiting on standard shipping. Please confirm availability before heading to the warehouse.
EMX Industries FAQ
What are EMX Industries products used for?
EMX Industries products are used for vehicle detection, gate safety, door safety, access control, driveway alerts, timing control, and sensing applications. Common products include loop detectors, photo eyes, vehicle probes, keypads, card readers, timers, and control accessories.
Are EMX loop detectors universal?
No. EMX loop detectors must be matched by model, voltage, socket or terminal style, relay output, loop function, and connected equipment. Always verify the detector model and gate or parking system requirements before ordering.
What is the difference between an EMX loop detector and an EMX photo eye?
An EMX loop detector reads an in-ground vehicle loop to detect vehicles. An EMX photo eye uses an infrared beam to detect an obstruction in a gate or door opening. Both may be used around automatic gates, but they serve different functions and are not interchangeable.
Can EMX photo eyes be used as gate safety devices?
Yes, select EMX photo eyes are designed for gate and door safety applications when properly matched, wired, aligned, and tested with the operator. The photo eye must meet the operator’s monitored safety requirements when monitoring is required.
What should I check before replacing an EMX photo eye?
Check the exact model number, voltage, monitored output, wiring type, reflector or through-beam setup, mounting location, alignment, range, and the operator input. Do not choose a replacement based only on appearance.
Can EMX vehicle probes be used for free-exit gate operation?
Select EMX vehicle probe systems may be used for free-exit gate operation when connected to a compatible gate operator input. Confirm the probe model, cable length, relay output, power, and installation location before ordering.
Why is my EMX loop detector not detecting vehicles?
A detection issue may be caused by the detector, loop wire, lead-in wire, bad splices, socket problems, incorrect settings, power issues, relay output problems, or the gate operator input. Check the full loop circuit before replacing parts.
Do EMX Industries products require professional installation?
Many EMX products connect to gate operators, overhead door operators, access control panels, parking systems, or safety circuits. A qualified technician should handle installation or replacement when wiring, monitored safety inputs, high voltage, access control integration, or unfamiliar controls are involved.
