Product Description
The Genie 111502.0003.S is a 1 HP, single-phase (1PH) MultiVolt replacement motor for Genie GT (Genie T-rail next-generation) and GH (Genie H-rail next-generation) commercial door operators. This full-horsepower 1PH motor provides increased drive capacity for higher-cycle or heavier door applications. MultiVolt design accepts 115 V, 208 V, or 230 V single-phase supply. This is NOT interchangeable with the 3PH 1 HP variant (111502.0006.S). Confirm operator family (GT/GH), phase (1PH), and HP class (1 HP) before ordering.
Key Features
- Full 1HP output for high-cycle commercial slide gate applications
- Single-phase (1PH) operation - no phase converter required
- MultiVolt design accepts 115V, 208V, or 230V single-phase input
- Direct OEM replacement for Genie GT and GH series operators
- Suffix .0003 uniquely identifies the 1PH 1HP variant within the 111502 series
- Drop-in fit engineered to GT T-rail and GH H-rail next-gen operator frames
Compatibility Guide
- Genie GT series commercial slide gate operator
- Genie GH series commercial slide gate operator
Professional Specs
| Feature | Specification |
|---|
| Model | Genie 111502.0003.S |
| Item Type | 1 HP 1PH MultiVolt Motor (GT/GH) |
| Voltage | 115V, 208V, 230V |
| Alternate Part Numbers | 111502-0003-S, 1115020003S, 111502.0003 |
Frequently Asked Questions
Q: Which Genie operator models is the 111502.0003.S compatible with?
A: Part number 111502.0003.S is designed exclusively for the Genie GT (T-rail next-gen) and GH (H-rail next-gen) series commercial slide gate operators. It is not rated for use in earlier Genie model lines such as the SL or IS series.
Q: What does the .0003 suffix mean and how does it differ from other variants in the 111502 series?
A: The .0003 suffix designates the single-phase (1PH), full 1HP output variant within the 111502 series. Other suffixes in the same family include .0001 (1PH 1/2HP), .0004 (3PH 1/2HP), .0005 (3PH 3/4HP), and .0006 (3PH 1HP). Installing the wrong variant can damage the operator or void the warranty.
Q: What does MultiVolt mean for this motor and what input voltages are supported?
A: MultiVolt means the motor is internally designed to accept 115V, 208V, or 230V single-phase input power. This eliminates the need to stock separate motors for different job-site voltages and simplifies field replacement.
Q: Can the 111502.0003.S be installed as a field replacement without returning the operator to a service center?
A: Yes. The 111502.0003.S is a direct OEM replacement motor intended for field service. Standard hand tools are sufficient to remove the failed motor and install the new unit. Always de-energize and lock out the operator before beginning work, and verify input voltage matches the motor's MultiVolt range before restoring power.
Q: Can this motor be used on a three-phase power supply?
A: No. The .0003 variant is single-phase (1PH) only. If your site supplies three-phase power, you must use the 111502.0006 (3PH 1HP) variant instead. Running a single-phase motor on a three-phase supply wired incorrectly will damage the motor windings.
[ITEMPRICE]