Product Description
The Genie OPABIOGX.S is a plug-and-play Auxiliary Output Module (AOM) designed for Genie commercial door operators equipped with an expansion module port. It provides multiple SPDT relay output groups - Up Limit (2 sets), Down Limit (2 sets), Mid-Stop Limit (1 set), ADA (1 set, configurable for open, close, or both), and Lamp (1 set with 5-minute delay) - enabling connection of warning lights, pre-motion alarms, interlocked doors, and external status indicators. Configuration is performed via the built-in LCD display. The module supports daisy-chain connection with other Genie expansion modules for expanded functionality.
Key Features
- Up Limit Output - 2 sets SPDT relay - activates at fully open position
- Down Limit Output - 2 sets SPDT relay - activates at fully closed position
- Mid-Stop Limit Output - 1 set SPDT relay - activates at intermediate door positions
- ADA Output - 1 set SPDT relay - configurable for open, close, or both movements
- Lamp Output - 1 set SPDT relay - activates with 5-minute delay
- LCD display for on-site relay configuration
- Daisy-chainable with other Genie commercial expansion modules
- Plug-and-play installation into control board expansion port
Compatibility Guide
- Genie commercial door operators with expansion port (specific model list not published - verify with Genie commercial product documentation)
| Feature | Specification |
|---|
| Model | Genie OPABIOGX.S |
| Item Type | Auxiliary Output Module |
| Voltage | Powered via expansion port (specific voltage not published) |
| Contact Configuration | Up Limit Output - 2 sets SPDT; Down Limit Output - 2 sets SPDT; Mid-Stop Limit Output - 1 set SPDT; ADA Output - 1 set SPDT (configurable); Lamp Output - 1 set SPDT (5-minute delay) |
| Materials | PCB module with plug-in expansion connector, SPDT relay components, and LCD display panel |
| Mounting | Plug-in to control board expansion port - no additional hardware required |
Frequently Asked Questions
Q: How many relay outputs does the OPABIOGX.S provide?
A: The module provides 7 SPDT relay output sets total: 2 sets for Up Limit (fully open), 2 sets for Down Limit (fully closed), 1 set for Mid-Stop Limit (intermediate position), 1 set for ADA output, and 1 set for Lamp output.
Q: What is the ADA Output and how is it configured?
A: The ADA Output is a single SPDT relay configurable via the onboard LCD to activate during door open movement, door close movement, or both movements, supporting ADA-compliant signaling requirements.
Q: How does the Lamp Output function on this module?
A: The Lamp Output SPDT relay activates with a 5-minute delay, typically used to control a courtesy light or warning lamp that stays on after door operation.
Q: What triggers the Mid-Stop Limit Output?
A: The Mid-Stop Limit Output activates when the door is at an intermediate (partial open or mid-travel) position, enabling signaling or interlock logic for mid-travel door states.
Q: Can the OPABIOGX.S be daisy-chained with other Genie expansion modules?
A: Yes. The OPABIOGX.S is designed to daisy-chain with other compatible Genie expansion modules such as the OPABTCGX.S Timer Close Module via the expansion port.
[ITEMPRICE]