The Genie OPABTCGX.S is a plug-and-play Timer Close Module (TCM) designed for Genie commercial door operators equipped with an expansion module port. It provides automatic timed close functionality - the door opens, waits for the configured timer period (1 second to 5 minutes), then initiates a close sequence. A configurable pre-close warning output activates 2 to 10 seconds before closing to alert personnel. The module features an LCD display for on-site configuration and can be daisy-chained with other Genie expansion modules. An entrapment protection device is required when this module is installed.
A: The timer range is user-selectable from 1 second to 5 minutes in user-defined increments via the onboard LCD display.
A: The pre-close warning output activates a configurable 2 to 10 seconds before the door begins to close, allowing time for personnel or equipment to clear the opening.
A: Yes. The module includes a timer hold input so an external switch or device can hold the timer and prevent the door from closing while the hold signal is active.
A: Yes. The OPABTCGX.S is designed to daisy-chain with other compatible Genie expansion modules (such as the OPABIOGX.S Auxiliary Output Module) via the expansion port.
A: Yes. The module includes both a normally closed (N-C) safety input for non-monitored edges or photo-eyes and a separate monitored edge input. An entrapment protection device is required for operation.
