Genie Vehicle Motion Sensors

Genie Black: 110341.0001.S Loop Sealant

$101.39

Add to Wish List

Add To Cart

Genie Gray: 110341.0002.S Loop Sealant

$80.78

Add to Wish List

Add To Cart

Frequently Asked Questions : Genie Vehicle Motion Sensor

Q1: What is a Genie vehicle motion sensor?

A1: A Genie vehicle motion sensor is a device designed to detect the presence or movement of vehicles near a commercial door or gate. These sensors automatically trigger the operator to open or hold the barrier open, facilitating seamless traffic flow.

Q2: What types of vehicle motion sensors are used with Genie operators?

A2: Common types of vehicle sensors include inductive loop detectors, magnetic exit wands, and microwave radar sensors. Each type utilizes different detection technologies to identify approaching vehicles based on mass, magnetic disturbance, or physical motion.

Q3: How does an inductive loop detector function in a commercial gate system?

A3: An inductive loop detector senses changes in a magnetic field created by a loop wire buried in the roadway. When a metallic vehicle passes over the loop, the detector registers the disturbance and signals the Genie operator to activate.

Q4: Are exit wands compatible with Genie commercial operators?

A4: Yes, magnetic exit wands can be integrated with Genie operators provided the control board supports standard low-voltage dry contact inputs. Exit wands are typically buried alongside the driveway to detect the metallic mass of passing vehicles.

Q5: Can a vehicle motion sensor be used as a primary safety device?

A5: Vehicle motion sensors are primarily intended for activation and free-exit requests, not as primary entrapment protection. To comply with UL 325 standards, dedicated safety devices like photoeyes or sensing edges must be installed to protect pedestrians.

Q6: What factors can cause a vehicle motion sensor to trigger falsely?

A6: False triggers can be caused by nearby moving metal objects, extreme temperature fluctuations, or electrical interference from adjacent power lines. Adjusting the sensitivity settings on the sensor's control module can often resolve these environmental issues.

Q7: Where should an exit wand be buried for optimal vehicle detection?

A7: An exit wand should be buried parallel to the driveway, typically a few inches deep, and at a sufficient distance from the moving gate to prevent false activations from the gate itself. Consult the manufacturer's installation manual for exact placement dimensions and conduit requirements.

Q8: What kind of wire is required for installing an inductive loop?

A8: Inductive loops require specialized cross-linked polyethylene insulated wire specifically rated for direct burial or saw-cut applications. Standard electrical wire is prone to moisture intrusion and degradation, which quickly leads to detector failure.

Q9: Who is qualified to install or replace a vehicle motion sensor?

A9: Installing vehicle sensors involves low-voltage wiring, precise logic board configuration, and often asphalt cutting or trenching. To ensure reliable operation and system safety, this work should only be performed by a local qualified commercial technician.

Q10: What routine maintenance is recommended for vehicle detection systems?

A10: Maintenance includes inspecting buried wire sealants for cracking, ensuring external sensor housings remain waterproof, and verifying that the detection zone accurately triggers the operator. Periodic testing by a professional helps maintain consistent traffic control and operational efficiency.