Pedestal-PM-Black 42 in Pad Mount Gooseneck Keypad Pedestal Technical Details
The Pedestal-PM-Black gooseneck stand is a 42 inch black pad mount keypad pedestal used for mounting select access control devices at a vehicle entry or exit point. It is commonly used with gate keypads, telephone entry systems, card readers, intercom stations, wireless keypads, and other low-voltage access control products where a freestanding post is needed near a driveway or gate lane.
This pedestal is designed for pad mount or curb mount installation on a prepared concrete surface. The black powder-coated finish and heavy gauge aluminum construction make it a practical choice for residential, commercial, gated community, and parking access installations. Always verify the mounting pattern, device size, conduit routing, anchor hardware, and final installation location before ordering.
What This Pedestal Does
A gooseneck pedestal positions the access control device where a driver can reach it from a vehicle. The curved gooseneck design brings the keypad, card reader, or entry device closer to the driver side of the vehicle without mounting the device directly to a wall, fence post, or operator cabinet.
- Provides a freestanding mounting point for access control devices
- Commonly used for gate keypads, card readers, telephone entry units, and intercoms
- 42 inch height is commonly used for standard vehicle keypad access
- Pad mount / curb mount design bolts to a concrete surface
- Black powder-coated finish for a clean outdoor access control installation
- Heavy gauge aluminum construction helps resist rust and corrosion
- Universal base plate and faceplate bolt pattern fits many common access control products
Compatible With
This black keypad pedestal may be used with select access control devices where the mounting plate, device size, bolt pattern, wiring path, and vehicle approach layout are compatible. The universal faceplate is intended to fit many manufacturers' products, but some devices may still require drilling, adapter plates, spacers, or installer modification.
- Select gate keypads
- Select telephone entry systems
- Select card readers and proximity readers
- Select intercom and call box stations
- Select wireless or wired access control devices
- Residential driveway gate access points
- Commercial vehicle entry and exit lanes
- Parking, community gate, and controlled-access applications
Important Compatibility Warning
Do not assume every keypad or telephone entry system will bolt on without checking the mounting pattern. The pedestal uses a universal style faceplate, but oversized telephone entry units, recessed-mount devices, specialty card readers, vandal-resistant boxes, large cellular call boxes, and custom access control enclosures may need a different pedestal, adapter plate, or custom mounting work.
This is the 42 inch black pad mount pedestal. It is not the white version, bronze version, direct burial version, double-height pedestal, truck-height pedestal, or a branded Linear GNC-1 / GNB-1 pedestal unless the product record specifically identifies it that way. Confirm the exact color, height, mount style, and part number before ordering.
Similar Products That Are Not Automatically Interchangeable
- 42 inch white pad mount pedestal: Same general pedestal style in white finish. Not the black version.
- 42 inch bronze pad mount pedestal: Same general pedestal style in bronze finish. Not the black version.
- Direct burial gooseneck pedestal: Longer post style intended to be set into the ground. Not the same as a pad mount pedestal.
- Linear GNC-1 / ACP00906: Linear curb-mount gooseneck post. Similar application, but not necessarily the same product or mounting dimensions.
- Linear GNB-1 / ACP00907: Linear burial-mount gooseneck post. Different mounting style.
- Dual-height pedestal: Used when separate car and truck access heights are needed. Not the same as a single 42 inch pedestal.
- Wall mount access control box: Mounts to a wall, column, or fence post and does not replace a freestanding gooseneck pedestal.
Not Intended For
- Direct burial installation unless a burial-mount version is ordered
- Truck-height access where a taller pedestal or dual-height pedestal is required
- Mounting very large telephone entry systems without checking plate size and support needs
- Replacing a keypad, card reader, telephone entry system, or intercom device
- Use as a gate post, bollard, crash protection post, or vehicle stop
- Mounting gate operators, barrier arms, control panels, or high-voltage electrical equipment
- Installations where the concrete pad cannot support a bolted pedestal
Features and Specifications
| Specification |
Details |
| Product Type |
Gooseneck keypad pedestal / access control stand |
| Part Number |
Pedestal-PM-Black |
| Mounting Style |
Pad mount / curb mount |
| Height |
42 in |
| Color |
Black |
| Finish |
Powder-coated finish |
| Construction |
Heavy gauge aluminum construction |
| Weather Resistance |
Rugged weather-resistant outdoor access control pedestal |
| Rust Resistance |
Aluminum construction helps resist rust compared with steel posts |
| Base Plate |
Universal bolt pattern base plate; verify anchor layout before installation |
| Faceplate |
Universal faceplate for many access control devices; some products may require field modification |
| Common Applications |
Keypads, card readers, telephone entry systems, intercoms, and access control devices |
| Installation Surface |
Prepared concrete pad, curb, island, or similar solid mounting surface |
| Items to Verify |
Anchors, mounting screws, conduit, wiring, access control device, and adapter plate requirements |
Package Contents
Package contents should be verified before publishing, picking, or shipping. This product listing is for the black 42 inch pad mount gooseneck pedestal. Access control equipment and installation hardware may be separate unless specifically listed.
- Black 42 inch pad mount gooseneck pedestal
- Base plate and faceplate as part of the pedestal assembly
- Keypad, telephone entry system, card reader, intercom, conduit, wiring, anchor bolts, and mounting screws only if specifically included
Also Known As / Related Product Names
- Pedestal-PM-Black
- Black gooseneck stand
- 42 inch keypad pedestal
- Pad mount keypad pedestal
- Curb mount gooseneck pedestal
- Access control pedestal
- Telephone entry pedestal
- Card reader pedestal
- Gate keypad stand
Related Parts and Service Checks
Before installing a keypad pedestal, review the access control layout and traffic approach. A properly placed pedestal should let the driver reach the keypad or reader without hitting the gate, curb, column, operator, or pedestal.
- Confirm the vehicle approach direction and driver reach distance.
- Check whether 42 inch height is correct for cars, SUVs, pickups, or mixed traffic.
- Verify whether a taller truck-height or dual-height pedestal is needed.
- Confirm the concrete pad is thick, level, and suitable for anchor bolts.
- Plan conduit routing before mounting the pedestal.
- Check the access control device mounting pattern and box depth.
- Confirm low-voltage wiring, power supply, relay wiring, and communication cable requirements.
- Keep the pedestal clear of gate travel, swing arcs, slide gate openings, vehicle turning paths, and pedestrian walkways.
Technician Note
Most keypad pedestal problems come from placement, not the pedestal itself. If the post is too far from the driveway lane, visitors may have to lean out of the vehicle. If it is too close, mirrors, doors, or bumpers can hit the stand. Lay out the island, curb, conduit, and keypad position before drilling the concrete.
For telephone entry units and larger call boxes, check the weight, mounting holes, and faceplate size before installation. A universal pedestal is helpful, but some access control boxes still need an adapter plate or field-drilled mounting holes.
Before Ordering Checklist
- Confirm the needed item is the black 42 inch pad mount pedestal.
- Confirm the part number Pedestal-PM-Black if matching an existing product record.
- Verify pad mount is correct and a direct burial post is not required.
- Confirm 42 inch height works for the vehicle type and traffic lane.
- Check whether the keypad, reader, telephone entry system, or intercom will fit the faceplate.
- Confirm whether anchor bolts, mounting screws, conduit, and wire are included or must be supplied separately.
- Confirm black finish is correct instead of white or bronze.
- Check the concrete pad location, conduit stub-up, and access control wiring before installation.
Installation and Service Notes
This pedestal should be installed on a suitable concrete pad or curb using appropriate anchors for the site conditions. Low-voltage access control wiring should be routed through conduit and protected from water intrusion, sharp edges, and vehicle damage. If the access control device requires power, relay wiring, network wiring, phone line, cellular antenna placement, or gate operator connection, follow the device and operator wiring instructions.
Do not mount the pedestal where it blocks emergency access, pedestrian paths, gate travel, safety photo eyes, safety edges, loops, or vehicle detection zones. Do not use the pedestal as a bollard or crash post. If wiring, conduit, or operator control connections are unclear, have the installation handled by a qualified gate or access control technician.
Professional Advisory
A keypad pedestal is part of the access control layout, not just a mounting post. The final location affects driver reach, gate timing, vehicle stacking, safety loop placement, photo eye placement, and service access. For best results, lay out the gate, driveway, loops, safety devices, operator, and access control wiring before mounting the pedestal permanently.
For South Florida customers, local pickup in the Hialeah Gardens area may be available when inventory allows. Confirm color, height, mount style, and stock before coming in for pickup.
Product Questions and Answers
What is this 42 inch black gooseneck pedestal used for?
This pedestal is used to mount select gate keypads, telephone entry systems, card readers, intercoms, and other access control devices near a driveway, gate lane, parking entrance, or controlled access point.
Is this pedestal pad mount or direct burial?
This is the pad mount / curb mount version. It is intended to bolt to a prepared concrete surface. If the job requires setting the post into the ground, verify a direct burial pedestal instead.
Does this pedestal include a keypad or telephone entry system?
No. This listing is for the pedestal only unless the product package specifically states otherwise. Keypads, card readers, telephone entry systems, intercoms, wiring, and access control equipment are normally selected separately.
Will the universal faceplate fit every keypad?
Not always. The universal faceplate fits many common access control products, but some devices may require field drilling, an adapter plate, spacers, or a different pedestal. Check the device mounting pattern before ordering.
Is the black pedestal the same as the white or bronze version?
The general pedestal style may be similar, but this item is the black finish version. Order white or bronze only if that is the color needed for the jobsite.
Does this pedestal include anchor bolts?
Anchor bolts and concrete fasteners should be verified before ordering. Many pedestal installations require the installer to provide anchors matched to the concrete pad and site conditions.
Is 42 inch height good for vehicle keypad access?
42 inch height is commonly used for standard vehicle access from cars, SUVs, and many pickup trucks. For truck lanes, commercial vehicles, or mixed-height traffic, consider whether a taller or dual-height pedestal is needed.
What should be checked before ordering this pedestal?
Confirm the black finish, 42 inch height, pad mount requirement, access control device mounting pattern, conduit route, concrete pad location, anchor hardware, vehicle approach, and whether any keypad, reader, intercom, or telephone entry unit must be ordered separately.
