Product Overview
The HBP4XL is the heavy bracket set used with select GTO PRO 4000XL and 4200XL swing gate opener installations. It includes the bracket hardware group needed to properly mount and support the larger actuator system at the gate and post. On heavier gates, the bracket set is not just installation hardware; it helps maintain geometry, pivot alignment, and the correct leverage point for the operator arm. This kit is commonly used when original brackets are missing, bent, badly worn, or when a 4000XL/4200XL installation requires the stronger bracket arrangement described in the operator instructions.
This replacement part is intended for restoring the original mechanical or control function of the listed Linear/GTO operator. Because older GTO PRO and Mighty Mule systems have several similar-looking model generations, match the part number, operator model, and original parts diagram before ordering. The same family name can include different arms, housings, control parts, brackets, or chain lengths depending on production year and single-gate or dual-gate layout.
Features and Specifications
| Manufacturer | Linear / GTO PRO / Mighty Mule |
|---|
| Product Type | Bracket kit |
|---|
| Part Number | HBP4XL |
|---|
| Application | GTO PRO 4000XL and 4200XL swing gate operator installations |
|---|
| Compatible Operator Type | Swing gate opener or slide gate opener service part, depending on model listed |
|---|
| Compatibility Note | Verify the original part number and operator model before ordering, especially when comparing XL, XLS, B, and non-B generations. |
|---|
| Kit Type | Heavy bracket set |
|---|
| Common Hardware | Gate bracket, post bracket, pivot bracket, stop plate style components |
|---|
| Operator Family | SW4000XL / SW4200XL |
|---|
Compatible With
- GTO PRO SW4000XL single swing gate opener
- GTO PRO SW4200XL dual swing gate opener systems
- GTO PRO SW4000XL installations needing the heavy bracket set for larger supported gates
- Select GTO PRO 4000XL/4200XL systems using gate bracket, post bracket, pivot bracket, and stop plate style hardware
Also Known As / Related Part Numbers
- HBP4XL
- HB4000
- GTO HBP4XL
- Linear HBP4XL
- GTO HB4000 bracket set
- 4000XL bracket kit
- 4200XL bracket kit
- gate bracket post bracket pivot bracket stop plate kit
Technician Notes
- The bracket set does not increase gate capacity by itself if the gate is poorly built or binding.
- Bracket geometry is critical on push-to-open and pull-to-open installations.
- Do not substitute light-duty brackets on a heavy SW4000XL/SW4200XL installation.
- Gate stops, hinges, and post strength should be checked before relying on new brackets.
Before Ordering Checklist
- Confirm the system is a 4000XL/4200XL family operator.
- Check whether the installation is push-to-open or pull-to-open.
- Inspect gate post strength, hinge condition, and gate stop placement.
- Compare all included brackets with the original installation manual.
Professional Advisory
Gate operator repairs should be performed with power disconnected and the gate secured so it cannot move unexpectedly. Do not bypass monitored safety devices, entrapment protection, limit components, or factory control wiring. If the gate is binding, the arm is bent, the slide chain is badly worn, or the operator has water or insect damage, have the full system inspected by a qualified gate technician before replacing only one part.
Product Questions and Answers
What is included in HBP4XL?
It is commonly described as the bracket set for 4000XL/4200XL systems, including gate/post/pivot/stop plate style hardware depending on the supplied kit.
Is this required for every SW4000XL installation?
It is used where the heavy bracket set is specified, especially on larger or heavier gate layouts. Check the installation manual and original bracket configuration.
Can this fix a sagging gate?
No. Brackets can restore the correct mounting hardware, but sagging hinges or a weak gate post must be repaired separately.
[ITEMPRICE]