Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated) - Liftmaster 2062P

Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated) - Liftmaster 2062P - Sold Individual

Q: What gate configurations is the Guardian 2062.100 / Liftmaster 2062P hinge designed for?

The Guardian 2062.100 / Liftmaster 2062P hinge is designed for heavy-duty swing gates that use square gate frames and square posts with a bolt-to-gate, bolt-to-post mounting style. It is suitable for residential driveway, commercial, and industrial access gates where high load capacity and tamper-resistant hardware are required.

Q: How many 2062.100 / 2062P hinges should be installed per gate leaf?

A typical installation uses two Guardian 2062.100 / Liftmaster 2062P Gorilla hinges per gate leaf. Using a matched pair allows the hinge system to reach its approximate 1,000 lb per pair load rating and distributes the gate weight between the upper and lower hinge locations.

Q: Can the 2062.100 / 2062P hinge be used on round gate frames or round posts?

The 2062.100 / 2062P hinge is configured for square-to-square mounting and is optimized for square gate frames and square posts. For installations using round gate frames or round posts, Gorilla hinge models designed specifically for round-to-round or weld-on applications are typically recommended instead.

Q: Is welding required to install the Guardian 2062.100 / 2062P hinge?

Welding is not required to install the Guardian 2062.100 / Liftmaster 2062P hinge. This model is a bolt-on hinge that attaches to the gate frame and post using mechanical fasteners, which is useful where welding is not practical or where a removable bolted connection is desired.

Q: What maintenance is recommended for the 2062.100 / 2062P hinge in heavy-use applications?

For heavy-use or outdoor applications, periodic maintenance of the 2062.100 / 2062P hinge includes checking bolt torque, verifying hinge alignment, and applying lubrication to the roller bearing assembly as needed. These steps help maintain smooth operation and extend the service life of the hinge.

Write a Review

PRICE $93.29

Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated) - Liftmaster 2062P - Rated 1,000 lbs. per pair. Sold Individual. Built to Reduce the Space between the Jamb/Gate/Post, Allows for 180° Swing, High Security, Welded Pin Design, Hardened Roller Bearing, Easy to Fully Lubricate, Limited Lifetime Warranty

Part Number: LM-2062P

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description
Spec Sheet
Manual

Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated) - Liftmaster 2062P

High-Capacity Structural Articulation for Non-Weldable Swing Gate Systems

The Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated), also widely recognized as the Liftmaster 2062P, serves as a mission-critical Replacement Component for extreme-load swing gate installations. Engineered for demanding Access Control environments where traditional welding is not a viable option, this hardware utilizes a dual bolt-on mounting configuration to provide maximum structural support for heavy-duty commercial and high-traffic residential gate frames. By integrating this professional-grade OEM Gate Part into your perimeter security infrastructure, you ensure structural permanence and smooth articulation, significantly reducing the mechanical load on automated gate operator motors.

Constructed from ultra-thick, heavy-gauge carbon steel, the GORILLA series is designed to handle stresses that exceed standard industrial hardware capabilities. The hinge arrives with a factory-applied industrial primer, providing an immediate barrier against oxidation while offering a perfectly prepared surface for final custom coating. This hardware is the preferred choice for fabricators and installers requiring a robust, non-welded solution that maintains peak performance under high-cycle conditions, high-wind loads, and constant usage.

Key Features & Benefits

GORILLA Ultra-Heavy-Gauge Steel: Engineered with increased material thickness to withstand the massive lateral forces and high-frequency cycles typical of industrial and commercial swing gates, preventing structural sagging.
Dual Bolt-On Versatility: Eliminates the need for on-site structural welding, allowing for secure mechanical attachment to non-weldable gate frames and mounting posts such as concrete, masonry, or specialized aluminum pillars.
Precision-Machined Pivot Point: Designed for fluid, friction-free movement, which minimizes the pushing and pulling force required by the gate operator, preventing premature gear wear and motor overheating.
Industrial-Grade Prime Coating: Arrives pre-treated with a high-durability primer, streamlining the installation process by providing essential baseline corrosion resistance and a ready-to-finish surface for site-specific topcoats.
Mechanical Integrity: The heavy-duty bolt-through design ensures that the gate remains firmly anchored under severe wind loads and continuous operation, maintaining precise gate alignment over the lifespan of the system.

Compatibility Guide

As a specialized high-capacity structural component, the Guardian 2062.100 / Liftmaster 2062P is explicitly engineered for seamless integration with heavy swing gate systems manufactured by:

LiftMaster
Guardian

Professional Specifications

Part Numbers: Guardian 2062.100 / LiftMaster 2062P
Hinge Series: GORILLA Ultra Heavy-Duty Swing Gate Hinge
Mounting Configuration: Bolt Mount (Gate Side) to Bolt Mount (Post Side)
Material: Ultra Heavy-Gauge Carbon Steel
Surface Finish: Prime Coated (Requires final exterior paint after installation)
Application: Commercial, industrial, and high-capacity heavy residential swing gates
Installation Method: Mechanical Bolting (Both Sides)

FAQ Section

Q1: What gate configurations is the Guardian 2062.100 / Liftmaster 2062P hinge designed for?

A1: It is designed for heavy-duty swing gates that use square gate frames and square posts, where a bolt-to-gate, bolt-to-post mounting style is preferred. This makes it ideal for driveway, commercial, and industrial access gates that require high load capacity and tamper-resistant hinge hardware.

Q2: How many 2062.100 / 2062P hinges should be installed per gate leaf?

A2: A typical installation uses two 2062.100 / 2062P Gorilla hinges per gate leaf. Using a matched pair allows the hinge system to achieve its approximate 1,000 lb per pair rating and helps distribute the gate load evenly between the top and bottom hinge points.

Q3: Can the 2062.100 / 2062P hinge be used on round gate frames or round posts?

A3: This hinge is specified for square-to-square mounting and is optimized for square gate frames and square posts. For round gate frames or round posts, it is usually better to use a Gorilla hinge model specifically designed for round-to-round or weld-on configurations.

Q4: Is welding required to install the Guardian 2062.100 / 2062P hinge?

A4: No. The 2062.100 / 2062P is a bolt-on hinge and is installed using mechanical fasteners to attach to the gate frame and post. This configuration is useful in situations where welding is not feasible or where a removable bolted connection is desired.

Q5: What maintenance is recommended for the 2062.100 / 2062P hinge in heavy-use applications?

A5: The hinge uses a hardened roller bearing design and is typically supplied lubricated, but periodic lubrication is recommended in heavy-use or outdoor conditions. Routine checks for bolt tightness, hinge alignment, and bearing lubrication will help maintain smooth operation and extend the hingeÂ’s service life.

Guardian 2062.100 GORILLA Heavy-Duty Hinge - Bolt to Gate, Bolt to Post (Prime Coated) - Liftmaster 2062P - Sold Individual

Recently Viewed Items