For best results, this hinge should be used in matched pairs on a single gate leaf and paired with Guardian/LiftMaster hardware of similar rating to maintain consistent performance and load distribution.
Professional Specs
These specifications are oriented toward installers, fabricators, and access control professionals:
- Product type: Weld-on heavy-duty gate hinge (Gorilla series)
- Configuration: Round-to-gate, round-to-post (round mount both sides)
- Manufacturer designation:
- Guardian: 2064.100 Gorilla Heavy-Duty Hinge, Prime Coated
- LiftMaster: 2064P Heavy-Duty Hinge, Prime Coated
- Load rating:
- Up to approximately 1,000 lbs per pair (properly installed, two hinges per gate)
- Material:
- Carbon steel body and yoke
- Finish:
- Prime-coated, paint-ready, corrosion-resistant base coat
- Bearing style:
- Hardened roller bearing with roller cage design
- Security:
- High-security welded pin to deter removal/tampering
- Mounting style:
- Weld-on to round gate frame
- Weld-on to round post or jamb
- Gate swing:
- Allows up to 180-degree opening (installation and site conditions permitting)
- Typical applications:
- Driveway swing gates
- Access-controlled vehicle gates
- Light industrial and commercial pipe-frame gates
- High-use residential entrances where heavy-duty support is required
Note: Exact dimensions (overall length, barrel diameter, weld plate dimensions) may vary by batch and should be verified from manufacturer drawings or physical measurement during fabrication.
FAQ Section
Q1: What type of gates is the Guardian 2064.100 / LiftMaster 2064P Gorilla hinge best suited for?
A1: This hinge is best suited for heavy tubular or pipe-frame swing gates that use round gate frames and round posts. Its round-to-round design and 1,000 lb per pair rating make it ideal for driveway, commercial, and access-controlled gates that require durable, smooth, and secure operation.
Q2: How many Guardian 2064.100 / 2064P hinges are required for a single gate leaf?
A2: For most installations, a single gate leaf will use two Gorilla hinges from the 2064.100 / 2064P series, installed as a matched pair. Using two hinges allows the rated load capacity per pair to be fully utilized and ensures proper weight distribution along the gate frame and post.
Q3: Can the 2064.100 / 2064P hinge be used with square posts or square gate frames?
A3: The 2064.100 / 2064P hinge is specifically designed for round-to-gate, round-to-post mounting and is optimized for round pipe or tubular steel. For square-to-square or flat mounting applications, a different Gorilla or Guardian hinge variant designed for flat/ square mounts is typically recommended.
Q4: Does the Guardian 2064.100 / 2064P hinge come pre-lubricated, and how should it be maintained?
A4: Gorilla hinges are generally supplied lubricated from the manufacturer, but installers should verify smooth operation after installation. Periodic lubrication according to manufacturer guidelines helps maintain smooth movement, reduce wear on the roller bearings, and extend service life, especially in high-cycle or harsh outdoor environments.
Q5: Is the prime-coated finish on the 2064.100 / 2064P hinge sufficient for outdoor use without additional painting?
A5: The prime-coated finish provides a protective base layer and is intended as a primer, not a final decorative finish. For long-term outdoor service, it is standard practice to apply a compatible topcoat to match the gate or post and further enhance corrosion resistance, particularly in coastal or high-moisture environments.
