HySecurity Gate Opener Replacement Parts

HySecurity HY-5A Vehicle Detector Mini Module w/ Digital Output

HySecurity HY-5A / MX4125 Vehicle Detector Mini Module w/ Digital Output - MX000041 -MX4621

$186.95

Add to Wish List

Add To Cart

HySecurity HY-5B Vehicle Detector Mini Module w/ Digital Output - MX4125 MX4621

$186.95

Add to Wish List

Add To Cart

HySecurity MX000485 Motor Contactor - Use on Various Hysecurity Gate Operators

$269.95

Add to Wish List

Add To Cart

HySecurity MX002106 Drive Belt SlideSmart DC 15 / HD25 / HD30 Gearbox to Motor

$37.95

Add to Wish List

Add To Cart

HySecurity MX002087 Target Magnet Assembly For SlideSmart DC Gate Operator

HySecurity MX002087 / MX4330 Target Magnet Assembly For SlideSmart DC Gate Operator

$49.95

Add to Wish List

Add To Cart

HySecurity MX000814 Drive Rail Roll Pin For SlideDriver - Replacement Roll Pin

$9.95

Add to Wish List

Add To Cart

HySecurity MX000672 Limit Switch with Cable For SlideDriver Smart Touch

$239.95

Add to Wish List

Add To Cart

HySecurity MX001034 T-Lock Assembly For SlideDriver Standard Cover

$129.95

Add to Wish List

Add To Cart

HySecurity MX002064 / MX5223 8" AdvanceDrive Replacement Wheel For SlideDriver, 8 inch

$139.95

Add to Wish List

Add To Cart

HySecurity MX000296 T-Lock Lock & Keys - StrongArm, SlideDriver, SlideSmart DC

$74.95

Add to Wish List

Add To Cart

HySecurity MX001766 Power Supply Board (115 / 230VAC) - Switchable Power Board

$74.95

Add to Wish List

Add To Cart

HySecurity MX001249 Transformer, 24VAC Output, 75VA, 60/50Hz

$199.95

Add to Wish List

Add To Cart

HySecurity MX001745 Limit Plate and Blocks Assembly for SwingSmart DC

$39.95

Add to Wish List

Add To Cart

HySecurity MX4994 AdvanceDrive Replacement 6" Aluminum Wheel Replaced MX001827

$114.95

Add to Wish List

Add To Cart

HySecurity MX000369 DC Power Supply Board

$249.95

Add to Wish List

Add To Cart

HySecurity MX001777 Limit Switch For StrongArm and SwingSmart DC Gate Operators

$29.95

Add to Wish List

Add To Cart

HySecurity MX002873 Lock, Latch, w/Key - SlideSmart DC 10F and 15 Latch Lock

$37.95

Add to Wish List

Add To Cart

HySecurity MX3542 Display Board Retrofit Kit - Replaced the Old MX001756 Unit

$224.95

Add to Wish List

Add To Cart

HySecurity MX002597 XtremeDrive Wheel Kit, 6 inch Replacement Wheel

HySecurity MX002597 XtremeDrive Wheel Kit, MX5349, 6 inch Replacement Wheel SlideDriver

$259.95

Add to Wish List

Add To Cart

HySecurity MX002598 XtremeDrive Wheel Kit, 8 inch - MX2598 for SlideDriver

HySecurity MX002598 XtremeDrive Wheel Conversion Kit, 8 inch - MX2598 for SlideDriver

$324.95

Add to Wish List

Add To Cart

HySecurity MX001403 Drive Belt Motor Pulley (24T, 9 mm) -

$69.95

Add to Wish List

Add To Cart

HySecurity MX3399 Smart Touch Controller Keypad - New Style - Hydraulic Operator

$89.95

Add to Wish List

Add To Cart

HySecurity MX001120 Spare Key For #4260-6T T-Lock - Replacement Key

$24.95

Add to Wish List

Add To Cart

HySecurity MX3356 Display Board For Operators With 32 Character Display

$149.95

Add to Wish List

Add To Cart

HySecurity MX001995 24VDC Electric Motor With Encoder For SlideSmart DC Operator

$449.95

Add to Wish List

Add To Cart

HySecurity MX002006 Limit Switch Kit For SwingSmart DC Gate Operator Openers

$29.95

Add to Wish List

Add To Cart

HySecurity MX000487 AC Power Supply Board For Smart Touch Controller

$204.95

Add to Wish List

Add To Cart

HySecurity MX3037-0 Smart DC Controller Board HySecurity brand DC Gate Operators

$474.95

Add to Wish List

Add To Cart

HySecurity MX002181 Idler Wheel, #40 Roller Chain Guide - SlideSmart DC

$29.95

Add to Wish List

Add To Cart

HySecurity MX003132 Advance Drive Wheel 8", MX3132 Replacement Drive Wheel Kit

$199.95

Add to Wish List

Add To Cart

HySecurity MX000585-0 Smart Touch Controller Board for HySecurity Gate Openers

$895.00

Add to Wish List

Add To Cart

HySecurity MX002707 Advance Drive Wheel 6", MX2707 Replacement Drive Wheel Kit

$157.95

Add to Wish List

Add To Cart

HySecurity MX4621 / MX4125 Vehicle Detector Mini Module w/ Digital Output

$186.95

Add to Wish List

Add To Cart

Frequently Asked Questions : HySecurity Gate Opener Replacement Parts

Q1: How do I find the correct replacement part for a HySecurity gate operator?

A1: Locate the specific model and serial number on the identification plate attached to the operator's chassis. Cross-reference this information with the official HySecurity technical manual to ensure the correct component is selected before acquiring a replacement.

Q2: Are HySecurity Smart Touch control boards interchangeable across all models?

A2: While Smart Touch controllers are used across various HySecurity platforms, the specific firmware and board configurations can vary by operator type, such as SlideDriver or SwingRiser. Always verify the exact board part number and software version required for your specific system.

Q3: What type of hydraulic fluid is required for HySecurity gate operators?

A3: HySecurity hydraulic operators require a specific grade of high-performance hydraulic fluid designed for extreme temperature variations, typically a specialized uniflow fluid. Refer to the manufacturer's maintenance manual for the exact fluid specifications and capacity requirements.

Q4: How often should the hydraulic fluid and filters be changed in a HySecurity system?

A4: Standard maintenance guidelines suggest checking fluid levels annually and replacing the hydraulic fluid and internal filters every three to five years. For systems operating in high-cycle environments or extreme climates, more frequent maintenance by a qualified professional may be necessary.

Q5: Can I replace a damaged hydraulic hose on a HySecurity operator myself?

A5: Replacing a hydraulic hose involves working with pressurized fluid and requires bleeding the hydraulic system afterward to remove trapped air. To ensure proper system pressure and prevent fluid leaks, it is highly recommended to hire a local qualified professional for this task.

Q6: What causes a HySecurity SlideDriver to lose its grip on the drive rail?

A6: A loss of grip is often caused by worn polyurethane drive wheels, an improperly adjusted advance assembly, or inadequate clamping force. Inspecting and replacing worn drive wheels should resolve the issue, but clamping pressure adjustments should follow the manufacturer's technical guidelines.

Q7: Are limit switches used in all HySecurity gate operators?

A7: Many modern HySecurity systems utilize limit switches or absolute position encoders to track the exact location of the gate. If the gate fails to stop at the designated open or close points, the encoder or limit switch assembly may require recalibration by a trained technician.

Q8: What should I do if my HySecurity operator's motor runs but the gate does not move?

A8: This symptom typically indicates that the hydraulic bypass valve is open, the manual release is engaged, or there is a failure in the hydraulic pump. Check that the manual release is fully secured; if the problem persists, consult a professional to inspect the internal hydraulic components.

Q9: How do I test the backup battery on a HySecurity DC operator?

A9: To test the backup power system, disconnect the primary AC power source and cycle the gate using a standard access control command. If the gate operates slowly or the control board indicates a low voltage error, test the batteries with a multimeter to determine if replacement is required.

Q10: Are secondary safety devices mandatory for HySecurity commercial gates?

A10: Yes, compliance with UL 325 safety standards requires the installation of monitored entrapment protection devices, such as photo eyes or safety edges. These components must be properly integrated into the control board to halt gate movement if an obstruction is detected.

HySecurity Gate Opener Replacement Parts

Products [33]

Frequently Asked Questions : HySecurity Gate Opener Replacement Parts

Q1: How do I find the correct replacement part for a HySecurity gate operator?

Q2: Are HySecurity Smart Touch control boards interchangeable across all models?

Q3: What type of hydraulic fluid is required for HySecurity gate operators?

Q4: How often should the hydraulic fluid and filters be changed in a HySecurity system?

Q5: Can I replace a damaged hydraulic hose on a HySecurity operator myself?

Q6: What causes a HySecurity SlideDriver to lose its grip on the drive rail?

Q7: Are limit switches used in all HySecurity gate operators?

Q8: What should I do if my HySecurity operator's motor runs but the gate does not move?

Q9: How do I test the backup battery on a HySecurity DC operator?

Q10: Are secondary safety devices mandatory for HySecurity commercial gates?