HySecurity MX000585-0 Smart Touch Controller Board for HySecurity Gate Openers
The HySecurity MX000585-0 Smart Touch Controller board is the main control platform used in many compatible HySecurity hydraulic gate operators. It handles operator logic, field programming, diagnostic messages, relay behavior, monitored safety inputs, accessory responses, and site configuration for heavy-duty commercial and high-security gate systems.
This board is most often considered when an operator has confirmed controller failure, surge or water damage, unresponsive inputs, communication/display issues, or output failures that remain after field wiring and accessories are isolated. HySecurity Smart Touch systems are highly configurable, so replacement requires more than physically swapping the board. The operator type and input power type must be programmed correctly during installation.
The MX000585-0 is associated with a broad Smart Touch ecosystem, including SlideDriver, StrongArm, HydraSwing, SwingRiser, HydraLift, HydraWedge, and other HySecurity hydraulic operator families where the parts diagram supports it. Because classic Smart Touch boards and display/keypad components can vary, confirm whether related parts such as MX000678 display board, MX4138 cable, MX000033 harness, or MX3399 keypad are needed for the specific repair.
Compatible With
- HySecurity SlideDriver hydraulic slide gate operators using Smart Touch Controller architecture
- HySecurity StrongArm barrier arm operators using Smart Touch where specified
- HySecurity HydraSwing hydraulic swing gate operators using Smart Touch where specified
- HySecurity SwingRiser operators using Smart Touch where specified
- HySecurity HydraLift operators using Smart Touch where specified
- HySecurity HydraWedge SM50 and related high-security wedge systems using Smart Touch where specified
- HySecurity HydraSupply XL Universal and supported hydraulic control applications
- Select HySecurity hydraulic gate operators where MX000585, MX000585-0, or ESR00018 SA is listed
- Replacement applications confirmed by original board number, operator model, input power, and HySecurity parts diagram
Features & Specifications
| Manufacturer | HySecurity |
|---|
| Product Type | Smart Touch Controller board |
|---|
| Part Number | MX000585-0 |
|---|
| Related Numbers | MX000585, MX000585-1, MX000585R-0, ESR00018 SA |
|---|
| Application | Main controller board for select HySecurity hydraulic gate operators |
|---|
| Compatible Operator Type | Select Smart Touch powered HySecurity hydraulic operators |
|---|
| Programming | Operator type and input power type must be programmed during installation |
|---|
| Related Service Parts | MX4138 cable, MX000033 harness, MX3399 keypad, MX000346 battery, MX000678 display board where applicable |
|---|
| Notes | Confirm board generation and display/keypad requirements before ordering |
|---|
Also Known As / Related Part Numbers
- MX000585-0
- MX000585
- MX000585-1
- MX000585R-0
- ESR00018 SA
- HY-MX000585-0
- HYS-MX000585-0
- MX4134 related Smart Touch board reference
- MX4138 Smart Touch Controller cable
- MX000033 power supply board wiring harness
- MX3399 Smart Touch enhanced keypad
- MX000346 3V lithium battery
- MX000678 classic display board related reference
Technician Note
Program the operator type and input power type during installation. A Smart Touch board installed with the wrong operator configuration can create incorrect behavior, nuisance faults, or unsafe movement.
Before Ordering
- Match the original Smart Touch board number and operator model.
- Document current settings before removing the old board if possible.
- Confirm whether display, keypad, cable, or harness parts are also required.
- Check accessory wiring, safety devices, fuses, and power supply before condemning the board.
- Plan for complete programming and functional testing after installation.
Important Ordering Warnings
- Do not confuse Smart Touch hydraulic boards with Smart DC Controller boards.
- Classic board replacements may require display-board updates in some applications.
- A field wiring short or failed accessory can damage the replacement board.
Professional Advisory
Smart Touch Controller replacement is a professional repair. A qualified HySecurity gate technician should perform programming, safety input verification, and post-replacement testing.
Product Questions & Answers
What operators use the MX000585-0 Smart Touch Controller?
It is used on select HySecurity hydraulic operators with Smart Touch Controller architecture, including many SlideDriver and other hydraulic product families where specified.
Does this board need programming?
Yes. The operator type, input power type, limits, relays, safety inputs, and site-specific settings must be programmed and tested.
Is MX000585-0 the same as MX000585?
MX000585 and MX000585-0 are closely related Smart Touch board references. Always match the original board and parts diagram.
What related parts might be needed?
Depending on the operator and board generation, related service parts may include the MX4138 cable, MX000033 harness, MX3399 keypad, MX000346 battery, or display-board components.
Does this replace the MX3037-0 Smart DC board?
No. MX000585-0 is for Smart Touch hydraulic operator applications. MX3037-0 is a Smart DC Controller board for select DC operators.