HySecurity MX003132 Advance Drive Wheel 8", MX3132 Replacement Drive Wheel Kit
The HySecurity MX003132 AdvanceDrive wheel kit is an 8 inch drive wheel assembly used on select SlideDriver hydraulic slide gate operators. The drive wheel is a key traction component in HySecurity's tire-driven SlideDriver design, transferring force to the gate without a chain connection to the gate leaf.
This kit is commonly used when converting older SlideDriver wheel assemblies to the newer aluminum AdvanceDrive wheel system or when replacing a worn drive wheel. A worn or hardened wheel can reduce traction, cause slipping, increase correction faults, or make the operator work harder than it should, especially on high-cycle commercial sites.
The kit includes the 8 inch AdvanceDrive wheel, wheel hub, retaining plate, and installation hardware. Fitment must be checked carefully because HySecurity also uses 6 inch AdvanceDrive wheel kits on other SlideDriver models. The 8 inch MX003132 / MX3132 kit should not be substituted for the 6 inch MX002707 kit unless the parts diagram specifically allows it.
Compatible With
- HySecurity SlideDriver 80 applications where the 8 inch AdvanceDrive kit is specified
- HySecurity SlideDriver 200 applications where the 8 inch AdvanceDrive kit is specified
- HySecurity SlideDriver 50VF2 applications where the 8 inch kit is specified
- HySecurity SlideDriver 50VF3 applications where the 8 inch kit is specified
- Select older SlideDriver operators being converted from former drive wheel units to the AdvanceDrive wheel system
- Applications replacing former MX000690 style 8 inch drive wheel references where supported
- HySecurity SlideDriver tire-drive systems requiring the 8 inch wheel/hub/retaining plate kit
Features & Specifications
| Manufacturer | HySecurity |
|---|
| Product Type | AdvanceDrive replacement drive wheel kit |
|---|
| Part Number | MX003132 |
|---|
| Common Search Number | MX3132 |
|---|
| Wheel Diameter | 8 inch |
|---|
| Application | SlideDriver drive wheel replacement or conversion |
|---|
| Compatible Operator Type | Select HySecurity SlideDriver hydraulic slide operators |
|---|
| Included Components | AdvanceDrive wheel, wheel hub, retaining plate, and installation hardware |
|---|
| Related Old Reference | MX000690 is commonly associated with older 8 inch wheel replacement references |
|---|
Also Known As / Related Part Numbers
- MX003132
- MX3132
- HY-MX003132
- HYS-MX003132
- HySecurity 8 inch AdvanceDrive wheel
- HySecurity 8 inch drive wheel kit
- SlideDriver 8 inch wheel kit
- MX000690 related old wheel reference
Technician Note
Wheel size matters. The 8 inch MX003132 / MX3132 kit and the 6 inch MX002707 kit are both AdvanceDrive wheel kits, but they are used on different SlideDriver configurations.
Before Ordering
- Confirm the SlideDriver model before ordering.
- Verify the existing wheel diameter is 8 inches or the parts diagram calls for the 8 inch kit.
- Check whether the old wheel reference is MX000690.
- Inspect drive rail condition and gate movement before replacing the wheel.
- Confirm the kit includes all required hub and retaining hardware for the service.
Important Ordering Warnings
- Do not substitute the 8 inch kit for the 6 inch kit by appearance alone.
- A slipping gate can also be caused by wet/dirty drive rail, poor compression, worn rail, or gate drag.
- Older operators may require conversion-style hardware; verify the parts diagram.
Professional Advisory
SlideDriver drive wheel service should be performed with the operator secured. Improper wheel installation or poor drive rail condition can cause slipping and unreliable gate movement.
Product Questions & Answers
What operators commonly use the MX003132 8 inch wheel kit?
It is commonly associated with SlideDriver 80, SlideDriver 200, and 50VF2/50VF3 applications where the 8 inch AdvanceDrive kit is specified.
Is MX003132 the same as MX3132?
MX3132 is a common search/reference number for the 8 inch HySecurity AdvanceDrive wheel kit.
What comes in the kit?
The kit commonly includes the AdvanceDrive wheel, wheel hub, retaining plate, and installation hardware.
Does this replace MX000690?
MX000690 is commonly referenced as an older 8 inch drive wheel number related to the MX003132 / MX3132 replacement direction.
Can I use this instead of the 6 inch MX002707 wheel?
No. The 8 inch and 6 inch kits fit different SlideDriver applications. Match the wheel size and operator model.
