LiftMaster 02410C NEMA 4/12 Outdoor Key Switch with Stop - Customer Supplied Cylinder
The LiftMaster 02410C is a tamper-resistant outdoor key switch control station for commercial and industrial door operators. It is designed for surface mounting in areas where keyed Open/Close control and a separate Stop button are required.
This customer-supplied cylinder version is typically chosen when a building owner, school, municipality, warehouse, or facility manager wants the door operator control station keyed to an existing BEST-style or facility key system.
What This Part Does
The station provides key-controlled Open and Close commands and a separate Stop function to the operator control circuit. The switch is normally used at a doorway, dock, warehouse entrance, or service location where only authorized personnel should be able to command door movement.
The NEMA 4/12 enclosure helps protect the control station in outdoor and industrial locations. It is not a replacement for operator safety devices, reversing devices, or proper line-of-sight operation.
Compatible With
The 02410C is commonly used with LiftMaster industrial and commercial door operators that accept 3-button style Open/Close/Stop station wiring. Compatibility depends on the operator control circuit, wiring method, and cylinder requirement.
Common Compatible Applications
- Select LiftMaster commercial trolley operators with external control station inputs
- Select LiftMaster commercial jackshaft operators with Open/Close/Stop control inputs
- Select LiftMaster commercial hoist operators with 3-button station wiring
- Select LiftMaster industrial operators used in warehouses, docks, and service doors
- Commercial door operator applications requiring a customer-supplied key cylinder
Important Compatibility Notes
- This item is a control station, not a radio receiver or remote control.
- The operator must support separate Open, Close, and Stop control inputs.
- Customer-supplied cylinder requirements should be checked before ordering.
- Mounting, wiring, and operator control voltage should be handled by a qualified door technician.
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Outdoor Key Switch Control Station |
| Part Number | 02410C |
| Application | Commercial and industrial door operator control |
| Mounting | Outdoor surface mount |
| Enclosure Rating | NEMA 4/12 |
| Control Functions | Open, Close, and Stop |
| Cylinder Style | Customer supplied cylinder |
| Compatible Operator Type | Select LiftMaster commercial and industrial door operators with 3-button station inputs |
| Notes | Verify control circuit, cylinder style, and wiring requirements before ordering. |
Also Known As / Related Part Numbers
These numbers and search terms are commonly associated with this item. Related numbers should be confirmed against the operator, receiver, or parts diagram before treating them as direct replacements.
- 02410C
- 02-410C
- LiftMaster 02410C
- LiftMaster key switch with Stop
- NEMA 4/12 key switch station
- Open Close Stop key switch
Technician Note
Check the commercial operator wiring diagram before installing this station. The Open, Close, and Stop terminals must be wired correctly for the specific operator control board or contactor logic.
If the site requires a facility keyway, confirm the cylinder style and core requirements before ordering. This version is intended for customer-supplied cylinder use, so it should not be confused with the U-Change-It version.
Before Ordering, Confirm
- The operator supports Open, Close, and Stop station wiring.
- The installation requires the customer-supplied cylinder version.
- The mounting location requires a NEMA 4/12 outdoor surface-mount enclosure.
- The key station will be installed with the door or gate in clear line of sight.
- A qualified technician will wire the station to the proper low-voltage control terminals.
Professional Advisory
This control station should not be installed as a workaround for failed operator controls, missing safety devices, or unsafe door movement. Commercial doors should be tested after installation for proper Open, Close, Stop, and safety reversal operation.
Important Ordering Warnings
- Do not use this as a universal replacement for every key switch station.
- Do not confuse 02410C with 02410U; the cylinder style is different.
- Do not wire the station into high-voltage terminals unless the operator manual specifically calls for that arrangement.
- A key station does not replace monitored entrapment protection or required safety devices.
Questions & Answers
What is the main difference between 02410C and 02410U?
The 02410C is intended for customer-supplied cylinder applications, while 02410U is the U-Change-It cylinder version. The correct choice depends on the facility key system and cylinder requirement.
Can this key switch be used outdoors?
Yes. The 02410C is an outdoor surface-mount control station with a NEMA 4/12 enclosure for commercial and industrial environments.
Does this station include a Stop button?
Yes. It provides keyed Open/Close control with a separate Stop button for compatible commercial door operator control circuits.
Will this work with all LiftMaster operators?
It may be used with select LiftMaster commercial and industrial operators that accept 3-button station wiring. The operator wiring diagram should be checked before installation.
Is this a safety device?
No. This is a control station. It does not replace photo eyes, sensing edges, monitored entrapment devices, or other required safety systems.