LiftMaster CSW200101UL / CSW200UL 1 HP AC High-Traffic Swing Gate Operator
The LiftMaster CSW200101UL is the 1 HP AC high-traffic swing operator in the CSW200UL family. It is built for larger and heavier vehicular swing gate entrances that need commercial-duty operation and a gear-driven AC platform. Common applications include commercial driveways, gated communities, industrial facilities, and busy residential estates where gate size or duty demand calls for the 1 HP configuration.
For compatibility and replacement support, the exact model number matters. CSW200101UL identifies the 1 HP version, while CSW200501UL is the 1/2 HP version. Older CSW200 or Elite/Omni CSW200 operators may look similar in the field but can have different boards, wiring, safety requirements, and parts. Current CSW200UL systems work with compatible Security+ 2.0 accessories, monitored safety devices, LiftMaster access control products, and properly configured dual-gate communication.
Compatible With
Commonly paired compatible accessories and related system families include the following. Verify current manual, horsepower, voltage, and UL generation.
- LiftMaster Security+ 2.0 remote/accessory platform
- LiftMaster myQ compatible gate monitoring/control accessories where supported
- On-board Security+ 2.0 receiver for supported LiftMaster remote controls
- 811LM and 813LM commercial remotes with compatible receiver configuration
- 892LT and select Security+ 2.0 learning remotes where supported
- KPW250 and select LiftMaster wireless keypads where supported
- STAR1000 commercial access receiver for expanded transmitter management where required
- LOOPDETLM plug-in loop detector when supported by the control board/application
- LMRRUL monitored retro-reflective photo eye
- LMTBUL monitored through-beam photo eyes
- LMWEKITU monitored wireless edge kit and compatible monitored safety edge systems
- CAPXS, CAPXL, CAPXLV, and select LiftMaster access control products when properly interfaced
- Single swing and properly configured dual swing CSW200UL installations
Features and Specifications
| Manufacturer | LiftMaster |
|---|
| Part Number | CSW200101UL / CSW200101-UL |
|---|
| Product Type | Commercial vehicular swing gate operator |
|---|
| Motor | 1 HP AC |
|---|
| Gate Rating | Commonly rated up to 22 ft or 2000 lb for the 1 HP version |
|---|
| Gate Type | Vehicular swing gates |
|---|
| Accessory Platform | Security+ 2.0, myQ compatible accessories, LiftMaster access control integration |
|---|
| Safety Requirements | Monitored entrapment protection required per UL 325 and site layout |
|---|
Also Known As / Related Part Numbers
- CSW200101UL
- CSW200101-UL
- CSW200-101UL
- CSW200UL 1 HP
- LiftMaster Elite CSW200UL 1 HP
- Related 1/2 HP model: CSW200501UL / CSW200-501UL
- Older related family: Elite CSW200, verify generation before ordering parts
Technician Notes
- This row appears to use mfgid CSW200101-UL, while many current references use CSW200101UL without the extra hyphen. Treat those as a part-number formatting issue to verify against supplier data.
- Do not substitute the 1 HP model for the 1/2 HP model without confirming power, gate design, and project requirements.
- Older CSW200 generations may not share the same control board, monitored safety setup, or replacement parts.
- UL 325 monitored safety devices are required and should be planned before startup.
Before Ordering
- Confirm the customer is ordering the 1 HP CSW200101UL, not the 1/2 HP CSW200501UL.
- Confirm gate length, gate weight, hinge condition, wind loading, and duty cycle.
- Confirm voltage, phase, and available power.
- Identify current UL 325 generation versus older Elite/Omni equipment.
- Plan monitored entrapment protection, loops, access control, and warning signs before installation.
Professional Advisory
A 1 HP commercial swing gate operator must be installed with proper gate hardware, electrical supply, and monitored entrapment protection. Use a qualified gate technician for installation or electrical troubleshooting.
Product Questions
What does CSW200101UL mean?
CSW200101UL is the 1 HP version of the LiftMaster CSW200UL commercial swing gate operator family.
How is it different from CSW200501UL?
CSW200101UL is the 1 HP model commonly used for larger gate ratings, while CSW200501UL is the 1/2 HP model. Confirm the exact model before ordering or replacing equipment.
Can this operator use LiftMaster access control products?
Yes, current CSW200UL systems can be integrated with compatible LiftMaster access control products and radio accessories when installed with the correct interface and safety devices.
