LiftMaster K75-40A25 Torque Limiter Sprocket
The LiftMaster K75-40A25 torque limiter sprocket is the sprocket assembly portion of a commercial operator torque limiter. It works with the hub, friction discs, pressure plates, spring washers, key, and jam nut so the drive system can transfer torque while still allowing controlled slip when the door system is overloaded.
This sprocket is commonly tied to the LiftMaster GSD commercial door operator parts breakdown and is associated with #40 chain / 25-tooth torque limiter sprocket references. Because sprocket tooth count, chain size, bore, and clutch stack-up all matter, this part should be ordered by part number and diagram instead of being matched by diameter alone.
A worn torque limiter sprocket can cause chain noise, inconsistent drive, slipping, or uneven wear. However, sprocket wear is often connected to a loose chain, misaligned shaft, damaged hub, worn clutch discs, or a door that is binding. Those surrounding parts should be inspected before installing a new sprocket.
Compatible With
Use this sprocket where the parts diagram identifies K75-40A25, 75-40A25, or the matching torque limiter sprocket assembly.
- LiftMaster Model GSD commercial door operators using the K75-40A25 torque limiter sprocket
- GSD torque limiter assemblies listing C5 as 75-40A25 Sprocket Assembly
- Commercial operator torque limiter assemblies using #40 chain and the matching 25-tooth sprocket specification
- Select LiftMaster industrial-duty drive systems only when the parts diagram confirms this sprocket
Keep this sprocket separate from complete torque limiter kits, plain drive sprockets, and sprockets with different tooth counts, chain sizes, or bore dimensions.
Also Known As / Related Part Numbers
Known part references and related torque limiter components include:
- K75-40A25
- 75-40A25
- 7540A25
- K75-40A25 Torque Limiter Sprocket
- 75-40A25 Sprocket Assembly
- Related part: 07-10534 Torque Limiter Hub
- Related part: 07-10535 Clutch Pressure Plate
- Related part: 18-10539 Belleville Washer
- Related part: 39-10541 Clutch Disc
- Related part: 80-207-19 Key, 1/4 inch x 1/4 inch x 1-1/2 inch
- Related part: 84-JH-150 Hex Jam Nut, 1-1/2-12
Features & Specifications
| Feature / Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Torque limiter sprocket |
| Part Number | K75-40A25 |
| Application | Commercial operator torque limiter assembly |
| Compatible Operator Type | Select GSD commercial door operators |
| Chain Size | Commonly associated with #40 roller chain |
| Tooth Count | 25 teeth |
| Notes | Sprocket only; not the complete torque limiter kit |
Technician Note
When replacing this sprocket, check chain pitch, master link condition, shaft key fit, clutch disc wear, and torque limiter adjustment. A new sprocket can wear quickly if the chain is stretched or misaligned.
Before Ordering
- Match the exact part number on the operator parts diagram or the removed part whenever possible.
- Confirm the operator model, horsepower, voltage, phase, and production series before ordering.
- Check nearby brake, clutch, chain, shaft, and hardware components for wear so the new part is not damaged by another failed component.
- Do not substitute similar-looking commercial operator parts unless the LiftMaster parts breakdown confirms the same item number.
- Confirm the operator calls for K75-40A25 / 75-40A25.
- Verify #40 chain and 25-tooth sprocket specification.
- Inspect the torque limiter hub and clutch discs at the same time.
Professional Advisory
A torque limiter should be adjusted only according to the operator manual. Do not overtighten the clutch to overcome a dragging door, failed track hardware, or missing safety protection.
Product Questions & Answers
Is K75-40A25 the whole torque limiter assembly?
No. It is the sprocket assembly portion of the torque limiter, not the complete clutch assembly.
Which operator family is this most commonly tied to?
It is most commonly tied to LiftMaster GSD commercial door operator torque limiter assemblies.
What chain size is associated with this sprocket?
It is commonly described as a #40 chain, 25-tooth torque limiter sprocket.
What related hub works with this sprocket?
The related torque limiter hub commonly listed in the same assembly is 07-10534 / K07-10534.
What should be inspected with this sprocket?
Inspect the drive chain, hub, clutch discs, pressure plates, key, jam nut, shaft alignment, and door movement.