Liftmaster SAMSKIT - SAMS, DC, Sol Elite for Liftmaster Arm Barrier Gate Openers
The 71-DCSAMS is a LiftMaster SAMS field modification kit used to coordinate sequenced access between two compatible gate or traffic-control systems. SAMS stands for Sequenced Access Management System and is typically used where one operator must open, signal, or coordinate with a second operator before traffic moves through the lane.
This type of kit is commonly associated with LiftMaster Elite DC-powered gate and barrier equipment, including Mega Arm style barrier applications and other DC gate systems that support SAMS or expansion-port communication. It may be used in parking lanes, gated communities, controlled entries, or sites where a barrier arm works with another gate operator.
Compatibility must be verified from the operator manual and board layout. The 71-DCSAMS is not a universal relay add-on. If the operator does not have the correct SAMS/expansion support, communication protocol, and control configuration, the kit should not be forced into the system.
Compatible With
Compatible system types
- LiftMaster Elite DC-powered gate operators equipped with SAMS or expansion-port support
- LiftMaster Mega Arm and Mega Arm DC barrier gate applications where SAMS is supported
- Compatible barrier arm systems coordinating with a slide gate, swing gate, vertical pivot gate, or overhead gate
- Select roll-up, overhead, or traffic-teeth applications when used with compatible LiftMaster SAMS-capable controls
- Sequenced lane-control applications that require two access devices to operate in coordination
Verification required
- Control board must have the proper SAMS or expansion connection
- Operator firmware/control platform must support SAMS sequencing
- Site wiring, lane logic, safety devices, loops, and access-control relay outputs must be reviewed
- Not a substitute for a main control board, receiver, or loop detector
Features and Specifications
| Manufacturer | LiftMaster |
|---|
| Product Type | SAMS field modification kit |
|---|
| Part Number | 71-DCSAMS |
|---|
| Application | Sequenced access coordination for compatible LiftMaster Elite / DC systems |
|---|
| Compatible Operator Type | Select DC gate, barrier, overhead, and traffic-control systems with SAMS support |
|---|
| Security / Control Type | SAMS / expansion-port communication where supported |
|---|
| Notes | Not a universal relay or receiver kit |
|---|
Also Known As / Related Part Numbers
- 71-DCSAMS
- SAMS Kit
- SAMSKIT
- SAMS DC Sol Elite
- Sequenced Access Management System
- 71DCSAMS
- Field Modification SAMS DC Sol Elite
Technician Note
Use this kit only when the operator documentation calls for SAMS support. If the site has loops, access control, fire access, or traffic spikes, review the full lane sequence before wiring any control modifications.
Before Ordering Checklist
- Confirm the operator control board supports SAMS or the required expansion port.
- Confirm the system is a compatible LiftMaster Elite / DC control platform.
- Identify every device in the sequence, including barrier arm, slide/swing gate, overhead operator, traffic teeth, loops, and access control.
- Verify monitored safety devices and lane safety logic before testing.
- Confirm the part number needed is 71-DCSAMS / SAMSKIT and not a different field modification kit.
Professional Advisory
SAMS wiring affects vehicle flow and gate/barrier sequencing. A qualified gate technician should handle installation, programming, and safety testing on active traffic lanes.
Important Ordering Warnings
- Do not use this kit as a generic relay for unsupported operators.
- Do not bypass safety loops, photo eyes, edges, or monitored entrapment protection.
- Do not modify a traffic-control lane without confirming the full sequence of operation.
Product Q&A
What is the LiftMaster 71-DCSAMS used for?
It is a SAMS field modification kit used to coordinate sequenced operation between compatible LiftMaster access-control operators.
What does SAMS mean?
SAMS means Sequenced Access Management System. It helps coordinate one operator or access device with another in a controlled lane.
Is 71-DCSAMS universal?
No. It should only be used with compatible LiftMaster Elite / DC systems that support SAMS or the required expansion connection.
Can it work with barrier arms?
Yes, it is commonly associated with compatible LiftMaster barrier and Mega Arm style applications where SAMS sequencing is supported.
Why is professional setup recommended?
Incorrect sequencing can create unsafe vehicle movement, trapped vehicles, or conflicts with loops, access control, and safety devices.
