Liftmaster SWG600 Hinge Set Heavy-Duty Bearing 2,000 lbs. per pair. Steel
The LiftMaster SWG600 is a heavy-duty bearing hinge set for swing gates that need stronger support than light residential strap hinges can provide. This hinge pair is commonly rated for up to 2,000 lbs. per pair when installed on the correct gate and post structure. It uses a steel construction with high-grade needle bearings to help large gates swing more smoothly and reduce strain on the gate operator, post, and hinge mounting area.
This type of hinge is commonly used on larger residential driveway gates, commercial swing gates, agricultural entrances, industrial yard gates, and security gates where gate weight and daily use can wear out lighter hardware. The self-aligning bearing case helps compensate for small alignment differences, while the Zerk fittings allow lubrication as part of routine maintenance. Proper installation is critical. A strong hinge cannot make up for a weak post, undersized frame, poor welds, or a gate that is already sagging.
Compatible With
- Swing gate installations requiring a heavy-duty bearing hinge set
- 4 x 4 in. post applications where the mounting style and gate design match
- Large residential swing gates
- Commercial and industrial swing gates
- Agricultural and estate entry gates
- Manual or automated swing gates where hinge rating, geometry, and operator requirements are compatible
- LiftMaster, Elite, and other swing gate operator installations where the gate hardware is properly sized
Features & Specifications
| Specification | Details |
|---|
| Manufacturer | LiftMaster |
| Product Type | Heavy-duty bearing gate hinge set |
| Part Number | SWG600 |
| Application | Swing gate hinge hardware |
| Compatible Operator Type | Manual or automated swing gate installations |
| Load Rating | Up to 2,000 lbs. per pair when properly installed |
| Material / Finish | Steel |
| Post Compatibility | Commonly listed for 4 x 4 in. posts |
| Bearing Type | High-grade steel needle bearings |
| Included Components | Pair of heavy-duty hinges |
| Maintenance Feature | Zerk fittings for lubrication |
| Notes | Requires proper post, frame, alignment, and installation |
Also Known As / Related Part Numbers
- SWG600
- LM-SWG600
- LiftMaster SWG600
- LIF-SWG600
- LiftMaster heavy-duty bearing hinge set
- LiftMaster 2,000 lb hinge set
- SWG 600
Technician Note
For automated swing gates, hinge condition affects operator life. A gate that drags, sags, or binds can overload the arm or actuator even when the operator is correctly sized.
Before Ordering Checklist
- Confirm gate weight and gate size.
- Confirm post size and post condition.
- Verify the hinge mounting style works with the gate frame.
- Check for sagging, cracked welds, or post movement before replacing hinges.
- Confirm the gate can swing freely before reconnecting an operator.
Professional Advisory
Heavy gate hinge installation can involve welding, lifting equipment, and pinch hazards. Use a qualified gate fabricator or gate technician for installation and adjustment.
Product Questions and Answers
What size post is the SWG600 commonly used with?
The SWG600 hinge set is commonly listed for 4 x 4 in. post applications.
What gate weight can the SWG600 handle?
The SWG600 is commonly rated at 2,000 lbs. per pair when properly installed on a suitable gate and post structure.
Does the SWG600 require welding?
This hinge set is commonly used as a welded gate hardware component. Installation should be performed by a qualified gate fabricator or technician.
Is this hinge set only for LiftMaster gate operators?
No. This is gate hardware rather than an operator-specific electronic part. It may be used on suitable swing gate installations where the dimensions, load rating, and mounting style match.
What maintenance does this hinge style need?
The hinge set includes Zerk fittings, so periodic lubrication is normally part of routine gate maintenance. A heavy gate should also be checked for sag, post movement, and smooth swing travel.