Linear Pro Access Replacement Arms

Linear Pro Access SW2000XLS Replacement Arm with 6' Cable for SW2000XLS Operators

$549.95

(4)

Add to Wish List

Add To Cart

Linear Pro Access SW2002XLS Replacement Arm with 32' Cable for SW2002XLS Operators - Secondary Arm Only

$574.95

(2)

Add to Wish List

Add To Cart

Linear Pro Access SW3000XLS Replacement Arm with 6' Cable for SW3000XLS Operators

$624.95

(2)

Add to Wish List

Add To Cart

GTO SW3200XLS Replacement Arm with 40' Cable for SW3200XLS Operators - Secondary Arm Only

$599.95

Add to Wish List

Add To Cart

Linear SW4000XLS Replacement Arm with 6' Cable for SW4000XLS Operators

$684.95

(5)

Add to Wish List

Add To Cart

Linear SW4200XLS Replacement Arm with 40' Cable for SW4000XLS Operators - Secondary Arm Only

GTO SW4200XLS Replacement Arm with 40' Cable for SW4000XLS Operators - Secondary Arm Only

$749.95

Add to Wish List

Add To Cart

Frequently Asked Questions : Linear Pro Access Replacement Arms

Q1: What is a Linear Pro Access replacement arm?

A1: A Linear Pro Access replacement arm is an electromechanical linear actuator designed to automate the movement of swing gate leaves. It utilizes a DC motor and gear system to extend and retract a stainless steel piston based on signals from the control board.

Q2: How is compatibility determined for these replacement arms?

A2: Compatibility is dictated by the specific series of the existing gate operator system and the voltage requirements of the control board. It is technically necessary to match the replacement arm's model and connector type to the original manufacturer's specifications.

Q3: What are the primary mechanical components of a Linear Pro Access arm?

A3: A standard replacement arm consists of a weather-resistant housing, a high-torque DC motor, a gear reduction assembly, and a telescoping stainless steel extension rod. It also includes internal limit switches to manage the gate's physical travel.

Q4: Can these arms be utilized in dual gate configurations?

A4: Yes, Linear Pro Access replacement arms are compatible with dual gate systems by pairing a primary and secondary actuator. Both units must be synchronized through the central control board to ensure consistent opening and closing speeds across both gate leaves.

Q5: What power source is required for Linear Pro Access replacement arms?

A5: Most Linear Pro Access actuators operate on a 12-volt DC system, typically supported by a lead-acid battery backup. This power source can be maintained using an AC transformer or a compatible solar charging kit depending on site conditions.

Q6: How does the actuator arm determine its stopping point?

A6: The physical limits of the gate are managed by adjustable internal limit switches within the actuator housing. These components send a signal to the control board to terminate power to the motor once the gate reaches the designated fully open or closed position.

Q7: What is the difference between various Linear Pro Access actuator models?

A7: Differences generally involve the stroke length of the extension rod and the maximum weight capacity of the internal motor. Selection depends on the specific weight, width, and installation geometry of the gate leaf being automated.

Q8: What environmental factors impact linear actuator performance?

A8: Operational efficiency can be influenced by wind resistance, extreme temperature fluctuations, and the accumulation of debris on the telescoping piston. Ensuring low friction at the gate hinges is necessary to prevent excessive mechanical strain on the motor.

Q9: What routine maintenance is recommended for these gate arms?

A9: Routine maintenance involves cleaning the extension rod with a soft cloth and verifying that all mounting hardware and pivot pins are securely fastened. For internal lubrication requirements or complex electronic diagnostics, consult the manufacturer's manual or hire a local qualified professional.

Q10: What should be done if the arm fails to move or stops unexpectedly?

A10: Unexpected behavior is often caused by depleted battery voltage, loose wiring connections, or mechanical obstructions in the gate's travel path. For advanced electrical troubleshooting or hardware replacement, refer to the technical documentation or consult a local qualified professional.

Linear Pro Access Replacement Arms

Products [6]

Frequently Asked Questions : Linear Pro Access Replacement Arms

Q1: What is a Linear Pro Access replacement arm?

Q2: How is compatibility determined for these replacement arms?

Q3: What are the primary mechanical components of a Linear Pro Access arm?

Q4: Can these arms be utilized in dual gate configurations?

Q5: What power source is required for Linear Pro Access replacement arms?

Q6: How does the actuator arm determine its stopping point?

Q7: What is the difference between various Linear Pro Access actuator models?

Q8: What environmental factors impact linear actuator performance?

Q9: What routine maintenance is recommended for these gate arms?

Q10: What should be done if the arm fails to move or stops unexpectedly?