OPTEX OVS-01CC, 26' Range Vehicle Presence Sensor Car Counting

Item Id: OPTEX-OVS-01CC

Review this item

Your Price: $396.00

Quantity

Description

The OVS-01CC from OPTEX is designed to reliably detect the presence of a stationary or moving vehicle while also having the ability to ignore most human traffic. It also eliminates the hassles associated with the installation of a ground loop. No more concrete cutting required. The OVS-01CC can be mounted 2 to 3 feet off the ground and can detect both small and large vehicles. Its detection area can be customized with 8 range settings, 5 sensitivity settings and one-touch calibration. And because it is important to ignore human movement in car-counting applications, the OVS-01CC has 5 selectable menu setting options to ignore the movement of people through the detection area.

Key Features

Vehicle Virtual Loop
For moving or stationary vehicles, ignores human traffic
Car counting capability
Installs above ground, no concrete cutting required

The OVS-01CC is designed to detect the presence of a vehicle. In applications for car counting, it is installed above ground and can be mounted on a pole or post. Its detection area can be customized with 8 range settings, 5 sensitivity settings and one-touch calibration.

In car counting applications, it is important that the sensor only detect vehicles and ignore human movement. The OVS-01CC has 5 selectable menu setting options to ignore human movement.

With the OVS-01CC there is no need to stop traffic through the driveway during installation. It mounts quickly, easily and wires directly to the operator. No additional loop detector is required. No need for special programmers. A simple-to-use menu with visual indicators provides a simple and quick installation.

Name	VIRTUAL LOOP (Vehicle Detection Sensor for Vehicle Counting)
Model	OVS-01CC
Detection Method	Combination of microwave Doppler shift and FMCW technologies
Sensor Frequency	24GHz
Response	300msec
Supply Voltage	12 - 24VDC
Power Consumption	Heater enabled: Up to 190mA, Heater disabled : Up to 70mA (at 24V)
Output	Relay output DC30V, 0.3A (N.O. / N.C. switchable)
Microwave Sensor Sensing Distance	0.8 to 8m (2.6 to 26.3ft), adjustable
Detectable Vehicle Speed	2 - 60 kph (1.2 - 37.3 mph)
Device Setting	Sensitivity	Level 1 to 5
	Output 1 Contact Switching	N.O. / N.C.
	Output 2 Contact Switching	N.O. / N.C.
	Sensing Distance	1 / 2 / 3 / 4 / 5 / 4 / 6 / 7 / 8 m ( 3.3 / 6.6 / 9.8 / 13.1 / 16.4 / 19.7 / 23.0 / 26.3 ft.)
Indicator	Normal Operation	Standby: Solid Green Detected: Solid Red Unsuitable environmental notification: Slow Blinking Green
	Detection Area Check	Non detection: Blinking Green, Detected: Blinking Red
	Calibration	Getting Ready: Slow Blinking Blue Calibrating: Quick Blinking Blue
	Sensor Reset	Reset Complete: Solid Yellow for 2 seconds
Human Cancellation Function	Available
Operating Ambient Temperature	-30 to 50°C (-22 to 122 F)
Operating Ambient Humidity	95% max. (no condensation)
Degree of Protection	IP65
Installation Location	Indoor / Outdoor
Installation Height	500mm(20in.) (distance from the ground to the bottom of the unit)
Sensor Angle Adjustment	Left and Right: ±30 degrees (5-degree step)
Weight	400g (15 oz)
Accessories	Retaining screws x 4, Installation manual, OVS-SGA(A) included for US model only