The Virtual Loop 2.0 OVS-02GT is a Vehicle Presence Sensor for use on Gates and Barriers.
The advanced Distance Measuring Radar reliably detects vehicles of all sizes while ignoring nearly all human movement. Eliminate all the hassles of installing and servicing in-ground loops and give your customer reliable activation and presence for all their gate applications.
The Virtual Loop vehicle detectors are a great solution for sites where ground loops cannot be installed, such as when the road surface is damaged or unsealed, where there are cobble stones, or above drains or pipes.
The OVS-02GT detects the presence of a small or large stationary or moving vehicles within 8 meters while ignoring human traffic. It is easy to install; unlike ground loops, no civil works are required, and the device is mounted 500 mm from the ground. The OVS-02GT connects to an automatic barrier, slide gate, swing gate and industrial door. All of setting is done by smart phone App which support iOS and Android. It is possible to set all of setting by App and has 11 default setting for barrier, slide, swing gates. A lot of parameters adjustment, the calibration and the sensor status could be set by the App.
High performance sensing with High performance sensing with a sophisticated microwave sensing technology.
Presence detection for vehicle is provided by microwave FMCW technology.
The Virtual Loop 2.0 is a Vehicle Presence Sensor for use on Gates and Barriers. The advanced Distance Measuring Radar reliably detects vehicles of all sizes while ignoring nearly all human movement. Eliminate all the hassles of installing and servicing in-ground loops and give your customer reliable activation and presence for all their gate applications.
26 Feet Extended Rang
No cutting, coring or drilling of concrete or asphalt required
Extremely stable under all types of weather conditions
Presence Detection for all types of vehicle
Can be programmed to ignore or detect humans based on application
Settings via Smartphone Application
Direct conduit access , Direct installation for single gang box, Flexible power supply 12 - 24 AC / DC, Wide angle adjustment, Improved built-in heater, Visible indicator, Longer detection range, Water resistance, 2 outputs, Improved human cancellation.
Installation height 0.5m(1.6ft.), Operation type: Device activation, Sensitivity: 4, *Under normal operation, the detection area by an anctual vehicle may be smaller.
Product Information Video: https://youtu.be/AdhOm5v46WI
installation Guide https://youtu.be/_WHBW3SHfbs
CHEAT SHEET
QUICK REFERENCE GUIDE
Additional Features
- Settings via smartphone app
- Direct conduit access
- Direct installation for single gang box
- Flexible power supply
- Wide angle adjustment
- Improved built-in heater
- Visible indicator
- Longer detection range
- Water resistance
- 2 outputs
- Improved human cancellation
Key Features
- No cutting, coring, or drilling of concrete or asphalt required
- Extremely stable under all types of weather conditions
- Presence detection for all types of vehicles
- Can be programmed to ignore or detect humans based on application
Also available:
OVS-TMB Telescoping Mounting Bracket
OVS-SGA Single Gang Adapter
OVS-MP Mini Post
| Name | Vehicle Detection Sensor (Surface mount) |
|---|
| Model | OVS-02GT(BL) |
|---|
| Detection Method | Microwave (FMCW) |
|---|
| Frequency | Microwave : 24GHz
BLE communication : 2.4GHz |
|---|
| Response | MIN 500msec |
|---|
| Supply Voltage | 12 - 24V AC/DC |
|---|
| Power Consumption | Heater enabled: Up to 300mA
Heater disabled : Up to 90mA (at 24V) |
|---|
| Output | Spec 1 | Non-voltage solid state relay output 30VDC 0.3A or less (resistance load) (N.O. / N.C.) |
|---|
| Spec 2 | Non-voltage mechanical relay output 30VDC 1A or less (resistance load) (N.O. / N.C.) |
| Delay[s] | Off / 0.5 / 1 / 2 / 3 / 4 |
| Hold timer[s] | Off / 0.5 / 1 / 2 / 3 / 10 / 30 / 60 |
| Mode | Detection / Pre-detection / Mask |
| Type | Holding / Pulse IN / Pulse OUT |
| Pulse time duration | 150ms / 250ms / 500ms / 1s |
| Input | Spec | N.O. contact Non-voltage relay Input
On resistance 100O or less, Off resistance 200O or more,
Internal pull-up voltage : approx.3.3V |
|---|
| Mode | Link(OR gate) / Link (AND gate) / Inhibit / Wake |
| Application | Barrier-Activation, Protection / Slide gater-Activation, Protextion / Swing gater-Activation, Protection, Shadow |
|---|
| Detectable vehicle speed | 2 to 35km/h (1.2 to 22 mi/h) |
|---|
| Device setting | Detection range | 1.5m(7ft) to 8.0m(26ft) *0.5m(20in.) pitch |
|---|
| Main sensitivity | Level 1 to 7 |
| Fine turning presence | Level 1 to7 |
| Close range sensitivity | Level 1 to 7 |
| Side application detection | Off / On (2.5s) |
| Vibration sensitivity | Off / Low / Middle / High |
| Sensitivity boost | Off / Low / Middle / High |
| Sensitvity boost timer [s] | Off / 0.5 / 1 / 2 / 3 / 4 / 5 / 10 / 20 / 40 |
| Relay response time | Level 1 to 4 |
| Presence detection timer [min] | 5 / 15 / 60 / 180 / Infinity |
| Slide gate cancellation | Off / On |
| Ambient Temperature | -30 to 50? (-22 to 122 °F) |
|---|
| Operating Ambient Humidity | 95% max. (no condensation) |
|---|
| Degree of Protection | IP66 / NEMA4 |
|---|
| Installation Location | Indoor / Outdoor |
|---|
| Installation Height | 500mm(20in.) (from the ground to the bottom of the unit) |
|---|
| Sensor Angle Adjustment | Left and right : ±96°(3°pitch ) |
|---|
| Weight | 600g (21 oz)(Including accessories) |
|---|
| Accessories | 4pcs attached screws (2pcs Metric coarse thread M4 x 12, 2pcs Tapping screw 4 x 20), Quick reference guide |
|---|
