Products [270]
Select Engineered
Select Engineered Systems Telephone Entry, Keypads & Access Control Parts
Select Engineered Systems products are used on automatic gates, gated communities, apartment entrances, commercial properties, storage facilities, office buildings, residential driveway gates, parking entrances, and managed-access locations where telephone entry, keypad entry, card access, cellular control, or remote gate release is needed. At Gate Openers Unlimited, this page helps customers find SES telephone entry systems, Select Gate products, keypads, card readers, transmitters, receivers, control boards, relay boards, antennas, handsets, speakers, replacement keypads, and related access control parts.
When choosing a Select Engineered Systems product, start with the exact product family and model number. A TEC telephone entry system is not selected the same way as a CAT access control system, Select Gate cellular control, standalone keypad, card reader, transmitter, receiver, relay expansion board, replacement keypad, or antenna. The correct product depends on user capacity, relay outputs, display style, mounting type, phone or cellular service, Wiegand format, credential type, power, wiring, and the gate operator or access system receiving the signal.
SES Telephone Entry and Gate Access Products
Select Engineered Systems, often shortened to SES, is known for telephone entry, access control, priority communication, and gate entry products. Depending on the model, SES equipment may support visitor calling, keypad access, card access, remote relay control, cellular gate control, Select Pass transmitters, receiver control, relay expansion, and replacement service parts.
For gate and property access applications, SES products may be used where visitors need to call a resident, where residents need keypad or card access, where a manager needs relay control, or where a gate operator needs a clean open command from an entry system. The correct SES system depends on the property type, number of users, communication method, mounting location, and how the entry unit connects to the gate or door equipment.
Shop Select Engineered Systems by Product Type
- Telephone entry systems
- Cellular gate control products
- Multi-tenant entry systems
- Standalone keypads and replacement keypads
- Card readers and proximity access products
- Wiegand input and access control modules
- Relay boards and expansion modules
- Select Pass transmitters and receivers
- Handsets, speakers, microphones, and audio parts
- Antennas and range accessories
- Mounting boxes, hoods, pedestals, and faceplates
- Replacement boards and service parts for select SES systems
Common Select Engineered Systems Product Families
| Product Family | Common Use | Ordering Notes |
|---|---|---|
| TEC 1 Series | Telephone entry for basic gate and door access applications | Confirm display style, capacity, mounting type, phone or cellular interface, relay outputs, and whether card access is required. |
| TEC 2 / TEC 4 / TEC 10 Series | Telephone entry systems for larger residential, commercial, and multi-tenant applications | Verify line display, tenant capacity, enclosure style, board version, programming method, relay needs, and replacement part compatibility. |
| CAT Series | Controlled Access Technology systems with expansion capability for multi-door or multi-relay access control | Check door or relay count, expansion modules, card access needs, Wiegand inputs, software support, and wiring layout. |
| Select Gate Series | Gate control products for remote access, cellular control, or relay control depending on model | Confirm communication method, phone or cellular requirements, relay outputs, programming method, app support, and gate operator input. |
| 4G/LTE Cellular Select Gate | Cellular gate control where a traditional phone line may not be practical | Verify cellular coverage, SIM/service requirements, programming method, relay control, antenna location, and connected gate equipment. |
| Select Pass Transmitters and Receivers | Radio control and credential-style access for compatible SES systems | Check transmitter model, receiver model, frequency, Wiegand or relay output, button count, and system compatibility. |
| Relay Expansion Modules | Adding relay outputs for doors, gates, auxiliary controls, or expanded access points | Match the relay board or expansion module to the SES product family, wiring, software setup, and output requirements. |
| Wiegand Input Modules | Connecting card readers, RF receivers, or slave keypads to compatible SES systems | Confirm Wiegand format, reader type, module compatibility, wiring distance, voltage, and access control setup. |
| Replacement Keypads, Boards and Audio Parts | Repairing existing SES telephone entry and access control systems | Match exact model, board number, keypad style, display type, handset/speaker part, connector layout, and product generation before ordering. |
How to Choose the Right Select Engineered Systems Product
Start by identifying whether the site needs telephone entry, keypad-only access, card/fob access, cellular gate control, relay expansion, or replacement parts for an existing SES unit. A single residential gate may only need a smaller Select Gate or keypad-style solution, while an apartment or commercial property may need a TEC or CAT system with more users, directory features, card access, or multiple relay outputs.
- For telephone entry: confirm tenant capacity, display type, mounting style, communication method, and whether the site uses phone line, cellular, or another interface.
- For cellular gate control: verify cellular signal, antenna placement, SIM or service requirements, relay outputs, and programming method.
- For card or proximity access: match reader format, Wiegand compatibility, credential type, user capacity, and access control programming needs.
- For relay expansion: confirm how many gates, doors, or auxiliary devices need control and whether the SES system supports the expansion module.
- For transmitters and receivers: verify frequency, receiver style, button count, Wiegand or relay output, and system compatibility.
- For replacement parts: match the exact SES model, board number, keypad style, display, enclosure, handset, speaker, antenna, or accessory part before ordering.
Before Ordering Select Engineered Systems Parts
- Confirm whether the product is branded Select Engineered Systems, SES, Select Entry Systems, TEC, CAT, Select Gate, or Select Pass.
- Check the exact model number and part number from the existing entry unit, keypad, board, receiver, antenna, display, or accessory.
- Verify whether the system uses telephone line, cellular service, Wiegand wiring, keypad-only access, card access, relay-only control, or software programming.
- For telephone entry systems, confirm tenant capacity, display size, mounting style, relay outputs, and communication method.
- For cellular systems, confirm signal strength, antenna placement, SIM/service requirements, and current cellular compatibility.
- For keypads and readers, verify voltage, relay output, user capacity, Wiegand format, credential type, and weather exposure.
- For replacement boards, match the board number, product generation, connector layout, display compatibility, and compatible model.
- Do not use an access control product to bypass gate safety devices, emergency access requirements, monitored safety devices, fire access requirements, or required entrapment protection.
Select Engineered Systems Compatibility and Fitment Notes
Select Engineered Systems compatibility depends on the exact model, communication method, board version, relay output, Wiegand format, keypad style, display type, cellular interface, antenna setup, software support, and the connected gate operator or access control system. Two SES entry units may look similar but use different boards, display assemblies, firmware, wiring terminals, relay options, or replacement parts.
When replacing an SES keypad, board, handset, speaker, antenna, receiver, transmitter, relay module, Wiegand module, or telephone entry component, match the model and part number whenever possible. Older TEC, CAT, Select Gate, and related SES products may have limited replacement parts or updated versions, so current replacement compatibility should be verified before ordering.
If the SES product is connected to a gate operator, access control panel, electric strike, maglock, telephone entry system, fire access device, emergency access system, or commercial access cabinet, have a qualified technician verify wiring and operation. Do not bypass gate photo eyes, safety edges, safety loops, emergency access equipment, monitored safety inputs, or required entrapment protection.
Related Select Engineered Systems Access Control Categories
- Access Control
- Telephone Entry Systems
- Cellular Telephone Entry Systems
- Gate Keypads
- Card Readers and Proximity Readers
- Wiegand Access Control
- Remote Gate Control
- Control Boards
- Transmitters and Receivers
- Replacement Access Control Parts
- Pedestals and Mounting Accessories
- Commercial Gate Operator Accessories
South Florida Local Pickup
Gate Openers Unlimited is located in South Florida and offers local pickup from our Hialeah Gardens warehouse when available. This is especially helpful for local gate technicians, access control installers, property managers, HOAs, apartment communities, storage facilities, commercial properties, and homeowners who need Select Engineered Systems telephone entry parts, cellular gate controls, keypads, boards, transmitters, receivers, antennas, or related access control components without waiting on standard shipping. Please confirm availability before heading to the warehouse.
Select Engineered Systems FAQ
What are Select Engineered Systems products used for?
Select Engineered Systems products are used for gate access control, telephone entry, keypad entry, card access, cellular gate control, remote gate release, relay expansion, and managed property access. Common applications include gated communities, apartments, residential gates, commercial entrances, storage facilities, and HOA access points.
Is SES the same as Select Engineered Systems?
Yes. SES is a common abbreviation for Select Engineered Systems. Product labels, manuals, and listings may use Select Engineered Systems, SES, Select Entry Systems, TEC, CAT, Select Gate, or Select Pass depending on the product family.
Does Select Engineered Systems make gate openers?
Select Engineered Systems is best known for access control and telephone entry equipment, not complete gate operators. SES products are commonly connected to compatible gate operators to provide keypad entry, telephone entry, card access, cellular control, or relay activation.
What is the SES TEC series?
The SES TEC series is a telephone entry product family used for visitor calling and access control at gates, doors, and managed entrances. Model selection depends on display type, user or tenant capacity, mounting style, communication method, relay outputs, and replacement part compatibility.
What is the SES CAT series?
The SES CAT series stands for Controlled Access Technology and is used for access control applications that may require card access, expansion modules, Wiegand inputs, multiple doors, or multiple relay points. Compatibility depends on the exact CAT model and expansion setup.
Can SES products connect to automatic gate operators?
Yes, select SES products can connect to compatible gate operators using relay outputs or access control wiring. The gate operator input, relay type, power, wiring, and safety-device setup should be verified before installation.
What should I check before replacing an SES keypad or board?
Check the exact SES model number, keypad style, board number, display type, connector layout, communication method, relay outputs, enclosure style, and product generation. Do not choose a replacement board or keypad based only on appearance.
Do Select Engineered Systems products require professional installation?
Many SES products connect to gate operators, access control panels, telephone entry wiring, cellular modules, keypads, readers, transmitters, receivers, and relay boards. A qualified gate or access control technician should handle installation or replacement when wiring, programming, cellular setup, relay outputs, or safety-device integration is involved.
