HySecurity MX000079, 12VDC POWER SUPPLY ASSY

HySecurity MX000079, 12VDC POWER SUPPLY ASSY

The HySecurity MX000079 12VDC power supply assembly is used when a compatible HySecurity operator needs a 12VDC supply for approved accessories or internal low-voltage functions. HySecurity installation information for the 12V power supply shows a 3 amp maximum output and includes related service parts such as MX000982 power supply cable, MX000078 power supply board, standoffs, screws, and nuts in the installation details. In the field, technicians use this type of assembly when the operator has the correct input power source and a 12V accessory or circuit requirement. The part should not be treated as a generic plug-in adapter or as a substitute for operator power supply boards with different voltage/current ratings. Incorrect wiring, overloading the output, or installing the wrong power supply can cause accessory faults or damage.

Compatible With

• Select HySecurity operators requiring the MX000079 12VDC power supply assembly
• Commonly associated with HySecurity StrongArm, SlideDriver, SwingRiser, HydraSwing, and HydraLift style applications when the parts diagram calls for MX000079
• Compatible low-voltage accessories needing approved 12VDC supply within the rated output
• Installations using the HySecurity 12V power supply wiring diagram and 3 amp maximum output
• Not a replacement for 24VDC, 42VDC, 115/230VAC, or high-current HySecurity power supply boards

Features & Specifications

Also Known As / Related Part Numbers

• MX000079
• HySecurity MX000079
• Nice HySecurity MX000079
• 12VDC POWER SUPPLY ASSY
• 12VDC power supply assembly
• 12V power supply assembly
• Related installation references: MX000982, MX000078, MX001342, MX000626, MX000949

Technician Note

Before replacing the power supply, measure input and output voltage, check the connected accessory load, and look for shorted field wiring. A failed accessory can overload a new supply immediately.

Before Ordering Checklist

• Match the installed part number to MX000079 or a confirmed HySecurity parts diagram reference.
• Verify the operator model, generation, voltage, and controller family before ordering.
• Inspect related hardware, connectors, covers, seals, and mounting points for damage before reusing them.
• Do not substitute a similar-looking HySecurity part unless the parts diagram confirms the same application.
• Confirm accessory current draw stays within the rated 3 amp maximum output.

Professional Advisory

Low-voltage accessory power still requires correct polarity and wiring. For mixed low-voltage and line-voltage diagnosis, use a qualified gate technician.

Product Questions & Answers

What is MX000079 used for?

MX000079 provides 12VDC power in select HySecurity operator applications where the parts diagram and wiring diagram call for this assembly.

What is the output rating?

HySecurity installation information references a 3 amp maximum output for the 12V power supply.

Can I use it as a universal 12V adapter?

No. It should be used only in compatible HySecurity operator applications with the correct mounting and wiring.

What related parts may be included or referenced?

HySecurity installation details reference items such as MX000982 cable, MX000078 board, standoffs, screws, and nuts depending on kit configuration.

What should be checked if the power supply failed?

Check connected accessory load, shorted wiring, polarity, input voltage, moisture, and fuse/breaker conditions before installing a replacement.