HySecurity MX001180, PUSH BTN STA, 2 BUTTON 240V 5A

HySecurity MX001180, PUSH BTN STA, 2 BUTTON 240V 5A

The HySecurity MX001180 push button station provides two manual command functions: OPEN and CLOSE. It is used when a controlled site needs a simple hardwired station without a separate STOP button at that location. HySecurity accessory tables identify MX001180 as a 2-button open/close NEMA 1 push button station for SlideSmart HD, which makes it important to avoid confusing it with MX001174, the 3-button open/close/stop version. A two-button station may be appropriate for some supervised gate installations, but the operator must still have all required emergency stop, safety, and entrapment protection devices installed as required by the system design and local code. Match the original station and wiring diagram rather than relying only on the number of buttons.

Compatible With

This compatibility section is written cautiously because HySecurity parts can vary by operator generation, voltage, controller, installed options, and parts diagram revision.

• Select HySecurity SlideSmart HD accessory applications calling for MX001180
• HySecurity gate operator command circuits requiring a 2-button open-close station with matching rating
• Service, guard-station, or local-control points where separate OPEN and CLOSE inputs are used
• Smart Touch or Smart DC style inputs only when the operator wiring diagram confirms the connection
• Not a replacement for MX001174 3-button stations, stop-button stations, key switches, or safety sensors

Features and Specifications

Also Known As / Related Part Numbers

• MX001180
• HYS-MX001180
• Push Button Station, 2 Button
• Push Button Station Open/Close
• SlideSmart HD 2-button station
• 2-button open close station

Technician Note

Before replacing MX001180, compare the installed part, operator model, voltage or control type, and HySecurity parts diagram. Similar HySecurity accessories can look close in photos but serve different operator families or voltage configurations.

Before Ordering Checklist

• Confirm the HySecurity part number on the existing part or current parts diagram.
• Verify the operator model, generation, controller type, and installed options.
• Check voltage, wiring terminals, enclosure rating, and mounting location when applicable.
• Confirm whether the job requires a complete kit, a subcomponent, or a different voltage/model version.
• For safety devices, confirm the required monitored input type and do not bypass entrapment protection.

Professional Advisory

Electrical wiring, heater kits, and monitored entrapment devices should be installed by a qualified gate technician. Do not bypass required safety devices or substitute parts by appearance alone.

Important Ordering Warnings

• HySecurity part numbers with similar names are not always interchangeable.
• Voltage-specific heater kits and control accessories must match the operator data plate and wiring diagram.
• StrongArm, SlideDriver, SlideDriver II, SlideSmart HD, and Smart Touch/Smart DC accessories should be kept separate unless HySecurity documentation confirms fitment.
• For older operators, verify whether the installed system has been upgraded or retrofitted before ordering.

Product Questions and Answers

Does MX001180 include a stop button?

No. MX001180 is a 2-button open-close station. Use the correct 3-button station if a stop button is required at that location.

Is MX001180 interchangeable with MX001174?

No. MX001174 has open, close, and stop buttons. MX001180 has open and close buttons only.

Can this station be connected to any gate operator?

No. It should only be used when the operator control circuit, contact style, voltage rating, and wiring diagram match.

Is this a safety sensor?

No. It is a manual command station and does not replace monitored photo eyes, safety edges, or other entrapment protection.

What should be verified before ordering?

Verify the original part number, button count, contact functions, enclosure rating, control voltage, and where the existing station wires land.