The HySecurity MX001731 is a hydraulic hose kit for select SlideDriver 200 applications. Hydraulic hoses are critical parts of the SlideDriver hydraulic drive system, carrying oil between the pump, valve, manifold, hydraulic motor, or related drive components depending on the operator configuration. A leaking, cracked, swollen, kinked, or age-hardened hose can cause oil loss, pressure drop, poor drive performance, overheating, contamination, or unreliable gate movement. Listings identify MX001731 as a SlideDriver 200 hose kit, with references to a five-hose kit and other public listings noting 22 inch, 27 inch, and 50 inch hose lengths. Because SlideDriver hydraulic layouts vary by model, generation, horsepower, valve package, and field service updates, the original hose routing and parts diagram should be checked before ordering.
This is a service replacement part, so correct fitment matters more than the product name alone. HySecurity has used different assemblies across hydraulic slide operators, Smart DC operators, barrier operators, swing operators, and high-security crash products. Always compare the original part number, operator model, voltage or hydraulic configuration when applicable, connector or fitting style, and the factory parts diagram before ordering.
This part may be used with the following HySecurity applications when the installed operator and parts diagram confirm the match:
Compatibility should be verified before installation. Similar HySecurity parts may look close but differ by connector, hose length, switch geometry, voltage rating, gear size, lock cylinder, or operator generation.
| Manufacturer | HySecurity / Nice HySecurity |
|---|---|
| Product Type | Hydraulic hose kit |
| Part Number | MX001731 |
| Application | SlideDriver 200 hydraulic circuit service |
| Compatible Operator Type | Select HySecurity SlideDriver 200 / SD 444 references |
| Included Components | Hydraulic hoses as supplied by manufacturer kit |
| Notes | Verify hose count, length, routing, and fittings before ordering |
Before replacing this part, inspect the surrounding assembly for the condition that caused the failure. Worn pivots, loose hardware, incorrect routing, damaged wiring, leaking hydraulic fittings, bad mating gears, or a changed lock cylinder can make the replacement part appear incorrect or cause repeat failures.
Do not bypass limit switches, monitored safety devices, covers, lock hardware, or required safety circuits to keep a gate running. If the operator moves unpredictably, overtravels, leaks hydraulic oil, trips protection, or has damaged wiring, the system should be inspected and repaired before being returned to service.
It is mainly associated with select HySecurity SlideDriver 200 hydraulic slide gate operator hose-kit applications.
No. SlideDriver 15, 30F, 40, 50VF, Modular, and 200 models can use different hose kits and fitting layouts.
Oil leakage, low hydraulic pressure, weak gate movement, oil spray, hose cracking, swelling, or contamination around fittings can indicate a hose problem.
Yes. Public references vary by hose count and length details, so the original hose routing and parts diagram should be checked.
Hydraulic work should be handled carefully. A qualified gate technician should relieve pressure, control oil contamination, route hoses correctly, and test the operator after service.