The HySecurity MX3697-03 kit provides replacement hinge wear hardware for three hinges on select HySecurity wedge barrier assemblies. It is intended for hinge pivot service where worn bushings or pins allow movement, looseness, chatter, or uneven wedge operation.
This kit is more than a loose hardware package. The bushing and pin fitment affects how the wedge plate tracks through its travel and how load is carried through the hinge assembly. Replacing only one worn component may not correct a hinge problem if the mating pin, bushing, or spring pin is also damaged.
Common replacement reasons include excessive hinge play, visible wear at the hinge pins, noisy wedge movement, a plate that does not track evenly, or hinge hardware damaged during impact repair.
Commonly used with select HySecurity WedgeSmart hinge assemblies that use three hinges. Verify hinge count, barrier width, and parts diagram before ordering.
| Feature | Specification |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX3697-03 |
| Product Type | Bushings and pins hinge replacement kit |
| Application | Three-hinge wedge barrier hinge service |
| Compatible Operator Type | Wedge barrier operator |
| Hinge Count | 3 hinges |
| Included Components | Bushings, pins, and spring pins for 3 hinges |
| Common Application | WedgeSmart 9 ft and 10 ft three-hinge models |
| Notes | Four-hinge assemblies require a different kit |
Count the hinges before ordering. A three-hinge wedge and a four-hinge wedge can look similar from a distance, but the hardware kit quantity and part number are different.
Hinge service on a wedge barrier involves heavy hardware and pinch points. Use proper support and have a qualified technician perform the repair when the barrier plate is damaged, binding, or difficult to move.
The MX3697-03 kit is identified as a replacement kit with bushings, pins, and spring pins for three hinges.
It is commonly associated with HySecurity WedgeSmart hinge service, especially three-hinge 9 ft and 10 ft WedgeSmart models.
No. Four-hinge wedge assemblies commonly require the MX3697-04 kit instead of the three-hinge MX3697-03 kit.
They should be inspected for replacement when the wedge has hinge play, noisy movement, uneven travel, visible pin wear, or damage after a vehicle impact.
If the pins are still within specification, a bushing-only kit such as MX3696-03 may be relevant, but the parts diagram and hinge condition should decide the correct repair.