HySecurity MX4099, HOSE, KIT, MANIFOLD 3/8", HX

HySecurity MX4099, HOSE, KIT, MANIFOLD 3/8", HX

HySecurity MX4099 is a manifold hose kit for HydraSupply XL Universal systems. It is used to make the required hydraulic hose connections at the manifold in supported HydraSupply XL service configurations.

HydraSupply XL systems are hydraulic power units used to support compatible HySecurity hydraulic operators. The hose kit must match hose size, fitting style, routing, and manifold layout. Incorrect hoses can create leaks, flow restrictions, service access problems, or interference inside the cabinet.

MX4099 should be treated as a HydraSupply XL Universal manifold hose kit and not a general hydraulic hose replacement. Other HySecurity hose kits and manifolds may have similar descriptions but different length, fitting, or operator requirements.

Compatible With

HySecurity HydraSupply XL Universal systems where MX4099 is specified as the 3/8 inch manifold hose kit. Verify hydraulic power unit model, manifold style, hose routing, and connected operator configuration before ordering.

Features and Specifications

Also Known As / Related Part Numbers

• MX4099
• HYS-MX4099
• HySecurity MX4099 manifold hose kit
• Nice HySecurity MX4099
• HydraSupply XL manifold hose kit
• 3/8 inch HX hose kit
• Hose Kit Manifold 3/8 inch HX

Technician Note

HydraSupply hose kits should be installed only after confirming the exact manifold layout. Mark hose locations before removal to prevent crossed lines or incorrect routing.

Before Ordering Checklist

• Confirm the hydraulic power unit is HydraSupply XL Universal.
• Verify the parts diagram calls for MX4099.
• Match 3/8 inch hose size and fitting style.
• Inspect manifold ports, QD fittings, and hydraulic fluid condition.
• Leak-test and cycle-test after installation.

Professional Advisory

Hydraulic hose replacement should be performed with the gate secured, pressure relieved, and the system checked for leaks before normal operation.

Important Ordering Warnings

• Do not confuse MX4099 with MX001575, MX4471, or MX3587.
• Do not substitute generic 3/8 inch hoses unless all ratings and fittings are professionally verified.

Questions and Answers

What system is MX4099 for?

MX4099 is listed for HydraSupply XL Universal manifold hose applications.

What hose size is listed for MX4099?

It is described as a 3/8 inch manifold hose kit.

Is MX4099 the same as MX001575?

No. MX001575 is described as a two-piece 3/8 inch x 12 inch QD hose kit, while MX4099 is a HydraSupply XL manifold hose kit.

Can this be used on StrongArm M30/M50 manifolds?

Do not assume that. StrongArm M30/M50 brake manifold service commonly references MX3587 instead.

What should be verified before ordering?

Verify HydraSupply XL model, manifold layout, hose routing, fitting style, and the parts diagram.