HySecurity MX4288-01, Lights, Articulating, 7 ft

HySecurity MX4288-01, Lights, Articulating, 7 ft

HySecurity MX4288-01 is a red LED light strand kit used on a 7 ft articulating StrongArmPark DC oval barrier arm. The lights improve arm visibility for vehicles and pedestrians at parking, traffic-control, and secured-entry lanes, especially in low light or high-traffic environments. Public references identify MX4288-01 as two lengths of flexible red LED light strands for a 7 ft articulating StrongArmPark DC oval barrier arm. This is a replacement light accessory only; it does not include the full arm assembly, breakaway bracket, kill switch, controller, or traffic signal. Before ordering, verify whether the installed arm is a StrongArmPark DC oval articulating arm, confirm the arm length, and check the existing wiring harness. Similar LED strand parts are used on different HySecurity arm families, but length and connector fit must match.

Compatible With

This part is commonly associated with the following HySecurity applications when the installed equipment and parts diagram call for this exact part number:

• HySecurity StrongArmPark DC with 7 ft articulating oval barrier arm where MX4288-01 is specified
• StrongArmPark DC arm-light service applications using two flexible red LED strands
• Select HySecurity oval articulating arm lighting systems with matching 7 ft arm and harness
• Not for standard non-articulating arms unless the parts diagram calls for MX4288-01

Features and Specifications

Also Known As / Related Part Numbers

• MX4288-01
• HYS-MX4288-01
• Hy-MX4288-01
• MX428801
• Red LED articulating lights 7 ft
• StrongArmPark DC 7 ft arm lights
• Flexible red LED light strands
• MX4288-02 related 8 ft light strand
• MX4288-04 related WedgeSmart 7 ft light strand
• MX4124 related LED light strand - verify application

Technician Note

HySecurity parts often vary by operator family, production date, voltage, hydraulic layout, arm length, handing, and installed accessory package. Match the original part number and use the operator parts diagram before treating any related number as a direct replacement.

Before Ordering Checklist

• Verify the original part number is MX4288-01 or a supported related reference.
• Confirm the operator model, serial range, production generation, and parts diagram before ordering.
• Inspect the surrounding hardware, wiring, hoses, fittings, or mounting components that may have caused the original failure.
• Do not substitute similar-looking HySecurity parts unless the manufacturer parts list confirms interchange.
• For powered, hydraulic, or moving barrier systems, secure the gate or barrier arm and disconnect power before service.

Professional Advisory

Gate and barrier operator service can involve stored mechanical force, moving arms, hydraulic pressure, and high-voltage circuits. Do not bypass safety devices or force the operator to run with missing protection. Electrical, hydraulic, or unsafe movement problems should be handled by a qualified gate technician.

Product Questions and Answers

What is MX4288-01 used for?

MX4288-01 replaces the red LED light strands on a 7 ft articulating StrongArmPark DC oval barrier arm.

Does this include the barrier arm?

No. It is a light strand accessory, not a complete barrier arm, arm bracket, or operator kit.

Can it replace MX4288-02 or MX4288-04?

Not automatically. MX4288-02 and MX4288-04 are related LED strand references with different arm length or operator-family applications.

What should be checked before ordering?

Confirm the operator is StrongArmPark DC, the arm is the 7 ft articulating oval style, and the wiring harness/connector matches.

Are arm lights a safety device?

No. They improve visibility but do not replace monitored entrapment protection, traffic control, or required warning devices.