HySecurity MX4288-02, Lights, Articulating, 8 ft

HySecurity MX4288-02, Lights, Articulating, 8 ft

HySecurity MX4288-02 is an 8 ft red LED light strand kit for select HySecurity articulating oval barrier arm assemblies. Public listings describe it as two lengths of flexible red LED light strands for 8 ft articulating StrongArmPark DC and WedgeSmart DC oval barrier arm applications. These LED strands help make the moving arm more visible in parking, access-control, and perimeter-security lanes. The part is not a complete arm, controller, traffic signal, or monitored safety device. Correct fitment depends on the operator family, arm style, arm length, wiring harness, and connector routing. Because HySecurity uses similar-looking LED strand kits across different arm lengths and barrier families, MX4288-02 should be ordered only when the parts diagram or original light assembly confirms the 8 ft application.

Compatible With

This part is commonly associated with the following HySecurity applications when the installed equipment and parts diagram call for this exact part number:

• Select HySecurity StrongArmPark DC 8 ft articulating oval barrier arm lighting applications
• Select HySecurity WedgeSmart DC 8 ft articulating oval barrier arm lighting applications where MX4288-02 is specified
• Oval articulating arm light systems requiring two 8 ft flexible red LED strands
• Not a universal LED strip - verify arm length and connector layout

Features and Specifications

Also Known As / Related Part Numbers

• MX4288-02
• HYS-MX4288-02
• Hy-MX4288-02
• MX428802
• Red LED articulating lights 8 ft
• StrongArmPark DC 8 ft arm lights
• WedgeSmart DC 8 ft arm lights
• Flexible red LED light strands
• MX4288-01 related 7 ft StrongArmPark light strand
• MX4288-04 related 7 ft WedgeSmart light strand
• MX4124 related LED light strand - verify application

Technician Note

HySecurity parts often vary by operator family, production date, voltage, hydraulic layout, arm length, handing, and installed accessory package. Match the original part number and use the operator parts diagram before treating any related number as a direct replacement.

Before Ordering Checklist

• Verify the original part number is MX4288-02 or a supported related reference.
• Confirm the operator model, serial range, production generation, and parts diagram before ordering.
• Inspect the surrounding hardware, wiring, hoses, fittings, or mounting components that may have caused the original failure.
• Do not substitute similar-looking HySecurity parts unless the manufacturer parts list confirms interchange.
• For powered, hydraulic, or moving barrier systems, secure the gate or barrier arm and disconnect power before service.

Professional Advisory

Gate and barrier operator service can involve stored mechanical force, moving arms, hydraulic pressure, and high-voltage circuits. Do not bypass safety devices or force the operator to run with missing protection. Electrical, hydraulic, or unsafe movement problems should be handled by a qualified gate technician.

Product Questions and Answers

What operator families are commonly associated with MX4288-02?

Public references associate MX4288-02 with select StrongArmPark DC and WedgeSmart DC articulating oval barrier arm lighting applications.

Is MX4288-02 for a 7 ft or 8 ft arm?

MX4288-02 is the 8 ft light strand reference. 7 ft applications use different related part numbers depending on operator family.

Can this replace any red LED arm light strip?

No. The arm length, operator family, connector, and harness routing must match the installed HySecurity assembly.

Does this kit include the arm harness or control board?

It should be treated as LED light strands only unless the product listing or manufacturer package states otherwise.

Do LED arm lights replace required safety devices?

No. They improve visibility only and do not replace monitored photo eyes, edges, traffic controls, or warning signs required by the site.