The Security Brands 27-230 Edge E3 SecurePass is a post-mount smart keypad and card reader for gate and door access-control applications. It combines keypad entry, SecurePass proximity card access, Bluetooth app programming, onboard programming, and relay control in one access device.
This model is designed for installations where the customer wants both keypad codes and proximity card access without installing two separate front-end devices. It is a good fit for driveway gates, pedestrian gates, employee entrances, service yards, private roads, storage areas, parking gates, business gates, and access-controlled doors where a stand-alone smart keypad and reader are preferred.
The Edge E3 SecurePass offers the simplicity of a keypad and card reader at the entry point, but adds app-based programming and management through the Edge Smart Keypad app. A technician or administrator can connect to the unit by Bluetooth to update programming, sync data, export event reports, and manage the system without standing at the keypad for every change.
The 27-230 SecurePass version includes a Security Brands SecurePass proximity reader. This is an important ordering detail because the Edge E3 family is also available in other reader versions, including HID and Secura Key options. Do not assume cards or fobs from one credential family will work with another reader version. The credential type should be confirmed before the keypad is ordered.
The Edge E3 can control up to two compatible gates or doors when properly wired and configured. It includes relay control, event inputs, digital inputs, and one Wiegand input on the 27-230 model. The Wiegand input can be used for a compatible external reader or device where the wiring, protocol, distance, and power requirements are correct.
This unit supports Security Brands SBI Flex 64-bit and standard 26-bit Wiegand protocols. The SBI Flex protocol allows flexible keypad-code structure, while standard 26-bit Wiegand support helps with common access-control layouts. Always confirm the credential format, reader setup, and any connected Wiegand device before promising compatibility.
The Edge E3 SecurePass is not a cellular telephone entry system and it is not a cloud-managed Ascent product. It does not call residents, manage a tenant directory, use Summit Control cellular service, or replace an intercom. If the site needs visitor calling, cellular access management, touchscreen directory, or remote cloud administration, compare the Security Brands Ascent R1, X1, X2, M3, M8, C2, C4, or K2 products instead.
The Security Brands 27-230 Edge E3 SecurePass can be used with many gate operators, door controllers, and access-control devices that accept a compatible dry contact relay command. Final compatibility depends on the gate operator or door controller wiring diagram, relay input requirements, credential format, Wiegand device needs, power source, mounting location, and site wiring plan.
Important: The Edge E3 SecurePass does not power or replace the gate operator. It sends access commands to a compatible gate operator, door controller, or lock controller. The gate operator, door controller, electric lock power supply, safety devices, emergency access equipment, and gate or door hardware must be selected and wired correctly for the site.
| Feature / Specification | Details |
|---|---|
| Manufacturer | Security Brands / American Access Systems |
| Product Family | Edge 27 Series smart access control |
| Product Type | Smart keypad and card reader |
| Manufacturer Model | 27-230 |
| Common Store SKU | SB-27-230 |
| Common Name | Edge E3 SecurePass |
| Mounting Style | Post mount |
| Access Type | Keypad code access and SecurePass proximity card access |
| Included Reader | Security Brands SecurePass CR proximity reader; some distributor records may refer to SecurePass CR1 |
| Access Point Capacity | Controls up to 2 gates or doors |
| Programming | On-unit programming and app-based programming through Bluetooth connection |
| App | Edge Smart Keypad app for compatible Apple and Android devices |
| Connectivity | Bluetooth connection for administrator programming and management |
| Wiegand Input | 1 Wiegand input listed for the 27-230 Edge E3 SecurePass model |
| Event Inputs | 2 event inputs |
| Digital Inputs | 2 digital inputs |
| Supported Protocols | SBI Flex 64-bit and standard 26-bit Wiegand protocols |
| Code Features | Limited-use codes with use, 7-day, and 365-day restrictions |
| Timer Features | 7-day timers, 365-day timers, holiday timers, and special-event timers, one for each relay where configured |
| Reporting | Event reports with CSV export |
| Additional Features | Random code generation, alarm shunt, anti-passback, and firmware updates through the app |
| Faceplate | Stainless-steel faceplate |
| Enclosure | Powder-coated steel enclosure |
| Keypad | LED-backlit keypad |
| Input Power | 12-24 VAC/DC; actual voltage should not be more than 10 percent beyond specified range |
| Included Power Supply | 12-VDC power supply, PS-12DC1, based on current Edge 27 Series specification sheet |
| Current Draw | Less than 111 mA at 12 VDC; less than 60 mA at 24 VDC with one relay latched and LED components on |
| Relay Contact Rating | 10 A at 120 VAC / 24 VDC |
| Operating Temperature | -15 degrees F to 158 degrees F |
| Dimensions | 6.21 in H x 7.44 in W x 5.25 in D |
| Shipping Weight | 8 lb |
| Warranty Reference | Two-year limited warranty commonly listed by the manufacturer |
| Important Service Note | Bluetooth programming is local to the unit. This is not a cellular Summit Control device and does not provide remote cloud management by itself. |
Related item note: Pedestal, SecurePass credentials, additional Wiegand reader, gate operator, door controller, electric lock power supply, conduit, access-control cable, safety devices, loop detectors, fire department access equipment, and installation labor are separate unless the product listing specifically states that they are included.
The Edge E3 SecurePass is a local smart keypad and card reader. It is not the same as the Security Brands Ascent cellular line. Programming is handled at the unit or through a Bluetooth connection with the Edge Smart Keypad app. It does not use Summit Control, does not include cellular service, and does not provide remote cloud management by itself.
The main ordering question is credential type. This 27-230 model is the SecurePass reader version. If the customer already has HID credentials, review 27-230HID. If the customer uses Secura Key credentials, review 27-230SK. Do not assume one card family will work with another reader version.
Security Brands product information for this exact 27-230 model lists one Wiegand input. Some general Edge 27 Series material references Wiegand inputs with a model-dependent note, so use the model-specific 27-230 information when publishing this product page.
When wiring the relays, follow the gate operator or door controller manual. Do not wire the relay into high-voltage operator power or lock power beyond the relay rating. Keep low-voltage access-control wiring protected, labeled, and separated from high-voltage wiring where required.
The Edge E3 sends access-control commands only. It does not replace photo eyes, safety edges, loop detectors, emergency access devices, manual release equipment, or the gate operator control board. The gate or door system still needs its own proper safety and emergency-access setup.
The Security Brands 27-230 Edge E3 SecurePass should be installed by a qualified gate, access-control, or low-voltage technician when relay wiring, power supply wiring, Wiegand wiring, credential compatibility, pedestal mounting, app setup, or gate operator input wiring is not clearly understood.
Do not use this keypad and reader to bypass gate safety devices, monitored photo eyes, safety edges, loop detectors, stop circuits, emergency access devices, or required entrapment protection. The Edge E3 only provides access-control commands. Each gate operator or door system must still be installed, wired, and tested as a safe access system.
After installation, test every access method being used. Confirm keypad codes, SecurePass credentials, app programming, relay output, gate or door response, event reporting, timers, user permissions, emergency access, and gate safety-device response before turning the system over to the customer.
The 27-230 Edge E3 SecurePass is a post-mount smart keypad and card reader with a SecurePass proximity reader, Bluetooth app programming, onboard programming, and relay control for compatible gates or doors.
Yes. The 27-230 Edge E3 SecurePass includes a Security Brands SecurePass proximity reader. Confirm the customer's cards or fobs are compatible with the SecurePass reader before ordering.
The Edge E3 SecurePass can control up to two gates or doors when properly wired and configured. Final setup depends on relay wiring, operator inputs, power, programming, and site layout.
No. The Edge E3 SecurePass uses local Bluetooth app programming and onboard programming. It is not a cellular Summit Control device and does not provide remote cloud management by itself.
The 27-230 is the SecurePass reader version. The 27-230HID is the HID reader version, and the 27-230SK is the Secura Key reader version. Select the version that matches the customer's credential system.
Yes. The model-specific Security Brands product information for the 27-230 Edge E3 SecurePass lists one Wiegand input. Any connected Wiegand device should be verified for format, wiring, power, and configuration.
Usually no. The Edge E3 SecurePass is a keypad and card reader. It does not provide visitor calling, resident directory, video calling, or cellular telephone entry features.
Check credential compatibility, relay wiring, power source, Wiegand device needs, Bluetooth app setup, mounting location, gate or door operator input, emergency access, and the gate or door safety system before completing the installation.