The Security Brands 16-M8 Ascent M8 Cellular Multi-Tenant Entry System is a cellular multi-tenant telephone entry and access-control system for managed gates, doors, and community entry points. It is designed for properties that need directory-based visitor access, remote management, and modern credential options without relying on a traditional hardwired phone line.
This M8 model uses an 8 inch touchscreen directory interface with integrated proximity reader support on current materials. Confirm the exact model because Ascent X2, M3, and M8 systems differ in user interface, door count, Wiegand count, reader configuration, and installation intent.
The Ascent M8 lets a visitor search or enter a directory code, call an authorized resident or contact, and request access. Authorized users can also be managed through Summit Control and may use app, text, voice, keypad, QR code, and reader-based access depending on the site setup.
This is a system-design product, not a simple keypad swap. Confirm tenant count, directory needs, gate or door count, Wiegand readers, credential format, cellular coverage, service plan, mounting location, power, conduit, and relay wiring before ordering.
| Specification | Details |
|---|---|
| Brand | Security Brands / AAS |
| Model | 16-M8 |
| Product Type | Cellular multi-tenant entry and access-control system |
| Platform | Summit Control cloud-based management |
| User Interface | 8 inch full-color touchscreen directory |
| Gate / Door Control | Up to 4 gates or doors when configured correctly |
| Wiegand Inputs | 4 |
| Reader Support | integrated proximity card reader |
| Access Methods | App, text, voice, keypad, directory call, GuestPass QR code, and supported reader methods |
| Calling | Rollover calling up to 3 phone numbers; broadcast calling may be supported where configured |
| Cellular | 4G LTE cellular; site survey and service activation required |
| Capacity | User, code, and resident limits are plan and model dependent; verify current limits |
| Construction | Stainless-steel enclosure or faceplate with model-specific enclosure design |
| Package Contents | Entry system unit; verify power supply, mounting hardware, SIM/service activation, and accessories before final listing |
Multi-tenant entry systems should be designed around the property, not only the product model. Verify how many openings are controlled, how residents will be called, what credentials are used, who manages the account, and how emergency responders enter before the equipment is installed.
Installation should be handled by a qualified access-control, gate, or low-voltage technician. The work may involve cellular setup, low-voltage power, relay outputs, Wiegand wiring, directory programming, resident data, and gate or door hardware integration.
For South Florida communities, confirm cellular coverage at the pedestal or wall location before finalizing the system. Concrete structures, metal gate columns, landscape walls, and equipment enclosures can affect signal quality.
The 16-M8 Ascent M8 is used for cellular multi-tenant entry and access control at compatible gated communities, apartments, commercial properties, and controlled entry points.
This model is commonly listed for control of up to 4 gates or doors when wired and configured correctly. Final capacity depends on the system design, relays, readers, and service plan.
No traditional landline is normally required because the Ascent platform uses cellular communication, but the site needs acceptable cellular coverage and active service.
Yes. The Ascent multi-tenant platform supports visitor calling features such as directory calling and rollover calling where configured with resident information and service setup.
Only if the reader type, credential format, Wiegand protocol, facility code, and wiring are compatible. Verify existing access credentials before assuming they will work.
Check cellular signal, power, pedestal or wall mounting, conduit, relay outputs, Wiegand wiring, resident database needs, service plan, emergency access, and gate or door safety requirements.
No. Telephone entry and access-control outputs should never be used to bypass photo eyes, safety edges, fire access, emergency access, door life-safety hardware, or gate operator safety circuits.
The 16-M8 uses an 8 inch touchscreen interface, while the X2 uses a directory insert style. Choose by tenant count, visitor interface, gate or door count, reader needs, and property management requirements.