The BEA 10LZRMICROLEFT-T is the left-hand replacement sensor for the LZR-MICROSCAN T swing door safety system. It is not a complete safety kit; it is the left sensor head used to service an existing MICROSCAN T installation. MICROSCAN T is a laser-based, door-mounted safety system for automatic pedestrian swing doors. It uses time-of-flight sensing and gyroscope-assisted door tracking to maintain coverage as the door moves. A left replacement sensor is commonly ordered after physical damage, failure, water intrusion, wiring trouble, or diagnostics that point to the sensor head. Because MICROSCAN T parts are handed and use specific mounting arms, harnesses, spacers, covers, and programming, the left sensor must match the installed side and system generation.
BEA’s LZR®-MICROSCAN T is a LASER-based sensor system designed for automatic swing doors.
Utilizing Time-of-Flight technology, the LZR®-MICROSCAN T eliminates the limitations of infrared-based devices. Its background independence eliminates nuisance detections caused by changing weather and floor conditions, while gyroscopes sense the movement of the door for accurate positioning.
The LZR®-MICROSCAN T provides adjustable pattern depths that exceed the ANSI 156.10 8.2.2.3 standard and offer 100 percent coverage in all door states (fully open, fully closed, opening and closing).
Easy To Install
Plug & play technology utilizing a centralized hub and intuitive LCD interface greatly reduces installation and setup time
Highly Accurate Detection
High resolution, self-adapting detection zones, coupled with reduced uncovered zones create the most accurate and reliable safety sensor
Built-In Troubleshooting
On-board error log ensures easy technical support
Standards Compliant
Fully monitored internally, capable of external monitoring
UL 10B/C Listed
Fire rated for up to three hours
| Specification | Manufacturer Technical Data |
|---|---|
| Technology | LASER scanner, Time-of-Flight measurement |
| Detection Mode | Presence |
| Min. / Max. Door Width | 20 – 48" (measured from leading edge to sensor LED) |
| Mounting Height | 75 – 98" (measured from finished floor to sensor LED) |
| Remission Factor | > 2% |
| Angular Resolution | 2.56° |
| Testbody | 28" (H) × 12" (W) × 8" (D) |
| Emission Characteristics | IR LASER Wavelength 905 nm; Maximum Output Pulse Power 35 W (Class I) |
| Supply Voltage | 12 – 30 VDC (15 W Class II) |
| Power Consumption | < 15 W |
| Response Time | Typ. 40 ms; Max. 80 ms |
| Output Rating | 4 electro-mechanic relays (galvanic isolated - polarity free) All outputs Class 2 supply, 12 – 24 VAC, 12 – 30 VDC, Max. 15 W |
| Input Rating | 2 optocouplers (galvanic isolated - polarity free) 12 – 24 VAC, 50 / 60 Hz, 12 – 30 VDC, Max. 15 W |
| Test Input* | 8 – 15 VDC |
| Temperature Range | -13 – 121°F (-25 – 55°C) |
| Degree of Protection | Hub: IP20 / NEMA 1 Sensor: IP53 / NEMA 3 |
| Humidity | 0 – 95% Non-condensing |
| Vibrations | < 2 G |
| Material | PC / ASA |
| Norm Conformity | EN 60825-1-Eye-safety class 1 IR LASER (905 nm), UL 10B/C Fire Rated 3 hrs (file #R39071) |
| Mounting Angle (rotational) | 35° fixed |
| Tilt Angle | 0 – 5° (for angles less than 5° contact Technical Support) |
| Pollution on Front Screens | Maximum 30%; Homogenous |
| Manufacturer | BEA Sensors |
|---|---|
| Product Type | Replacement sensor head |
| Part Number | 10LZRMICROLEFT-T |
| Handing | Left |
| System Family | LZR-MICROSCAN T |
| Technology | Laser time-of-flight swing door safety sensing |
| Application | Automatic pedestrian swing doors |
| Related Accessories | Mounting arm, spacer, glass/fire door kit, universal accessory kit, cover, power supplies |
| Important Note | Handed replacement sensor only |
BEA LZR products can look similar but are not interchangeable across all applications. Match the exact sensor family, handed side where applicable, mounting location, wiring, finish, included kit components, and controller requirements before ordering.
Laser-based safety and presence sensors should be installed, adjusted, and tested by a qualified automatic door or gate technician. After replacement, the complete system should be safety-tested for proper detection and reliable operation.
No. It is the left replacement sensor head only.
No. Use the correct right-hand sensor for the opposite side.
It is used with BEA LZR-MICROSCAN T swing door safety systems.
Confirm the sensor label, handing, harness condition, mounting arm, power supply, and troubleshooting result.
No. A failed safety sensor should be repaired properly and tested, not bypassed.