The LiftMaster 041-0494-001 is a replacement visor clip service kit for select compatible LiftMaster remote controls. It is used to secure the remote to a vehicle sun visor for convenient access while driving. The listing description REMOTE, VISOR CLIP, SK, S3 indicates a remote visor clip service kit associated with Security+ 3.0 style remote applications.
This is a fitment-specific accessory. It should be matched by the exact remote model, original clip shape, rear slot design, and service part reference. Similar LiftMaster visor clips can look close, but older remote clips and newer Security+ 3.0 clips may not slide into the same remote housing.
This visor clip attaches to the back of a compatible LiftMaster handheld remote so the remote can be clipped to a vehicle visor. It does not change the remote's frequency, Security+ generation, number of buttons, programming method, battery type, or opener compatibility.
LiftMaster 041-0494-001 may be used with select LiftMaster remote controls that call for this specific Security+ 3.0 visor clip service kit. Because the public compatibility list for 041-0494-001 is limited, verify fit using the remote's manual, product label, parts diagram, or original clip style before ordering.
Check these details before selecting this clip:
Do not assume this visor clip fits every LiftMaster remote. Older LiftMaster remote controls may use different clip styles, including the common 29B137 style used with many earlier remote families. A clip that fits an older 971LM, 973LM, 371LM, 373LM, 891LM, 893LM, 893MAX, or similar remote may not fit newer Security+ 3.0 remote housings.
If your remote does not have the same rear clip track or the owner's manual does not call for the 041-0494 series clip, confirm the correct part before ordering. Forcing the wrong clip into the remote can crack the housing, loosen the clip track, or leave the remote unsecured on the visor.
The following related visor clip and remote accessories should not be treated as direct substitutes unless your remote documentation confirms the match:
| Specification | Details |
|---|---|
| Brand | LiftMaster |
| Part Number | 041-0494-001 |
| Manufacturer Description | REMOTE, VISOR CLIP, SK, S3 |
| Product Type | Remote visor clip service kit |
| Technology Reference | Security+ 3.0 related remote accessory application |
| Primary Use | Clips compatible remote control to a vehicle sun visor |
| Programming Required | No |
| Electrical Component | No |
| Remote Included | No, visor clip only unless package contents state otherwise |
| Compatibility Method | Verify by remote model, rear clip slot, original clip style, and owner manual part reference |
If the remote is not working, a visor clip will not repair the transmitter. Check the remote battery, button response, LED indicator, opener compatibility, receiver programming, and learn button generation separately. This part only addresses the missing or damaged vehicle visor clip.
Visor clips are often ordered after a remote falls off the visor or gets moved between vehicles. Before ordering, look at the back of the remote. If the plastic slide track is intact and only the metal or plastic clip is missing, a replacement clip may solve the mounting issue. If the rear housing is cracked, worn out, or missing part of the clip track, the new clip may not lock in properly.
Installation is normally a simple slide-on clip replacement when the remote housing and clip track are undamaged. No opener access, wiring, learn button programming, or battery replacement is required for the clip itself. Do not pry aggressively against the remote housing. If the rear slot is cracked or the clip does not slide in smoothly, stop and confirm the correct clip style before applying force.
This part is only a mounting clip for a compatible remote. If a door or gate will not respond to the remote, diagnose the remote battery, receiver, opener logic board, antenna, programming, frequency, and safety conditions separately. Do not bypass photo eyes, door reversal systems, gate safety devices, or access control safety circuits while testing remote operation.
No. LiftMaster 041-0494-001 is a remote visor clip service kit. It is used to mount a compatible remote to a vehicle sun visor and does not include a complete transmitter unless the package contents specifically say otherwise.
No. This clip should be used only with select compatible LiftMaster remotes that use the matching Security+ 3.0 style clip track. Verify the remote model, rear slot design, and manual before ordering.
Do not assume the 001 and 000 suffixes are identical without confirmation. They appear to be closely related visor clip numbers, but package variation, service-kit labeling, or fitment differences should be verified before substituting one for the other.
Not unless your remote documentation confirms it. The 29B137 clip is commonly associated with many earlier LiftMaster remotes, while 041-0494-001 is associated with newer Security+ 3.0 style remote applications.
No. The visor clip is a mechanical mounting part only. It does not affect remote programming, frequency, button count, learn button color, or opener compatibility.
No. A visor clip will not repair a non-working remote. Check the remote battery, LED indicator, programming, receiver compatibility, antenna, and opener condition if the remote does not operate the door.
Check the remote model number, original clip shape, rear clip slot, manual part reference, and housing condition. If the back of the remote is cracked or the clip track is damaged, the new clip may not stay attached.
Only if the remote documentation confirms the same compatible clip style. LiftMaster, Chamberlain, Craftsman, and Raynor remotes can share some part families, but visor clips are not automatically interchangeable across all models.