The LiftMaster 041-0495-001 is a keypad battery cover service kit for select compatible LiftMaster wireless keypads. It is intended to replace a missing, cracked, worn, or damaged battery cover on a compatible keypad housing. The listing description KEYPAD, BATTERY COVER, SK, S3 indicates a keypad battery cover service kit associated with newer Security+ 3.0 style keypad applications.
This is a mechanical replacement cover only. It does not change keypad programming, wireless compatibility, opener compatibility, PIN setup, frequency, battery type, or myQ app function. The correct fit should be verified by keypad model number, original battery cover style, rear housing shape, and replacement parts documentation.
This battery cover protects and secures the battery compartment on a compatible LiftMaster keypad. If the keypad works but the battery cover is missing, loose, cracked, or no longer stays in place, this service part may be the correct replacement when the keypad documentation confirms the match.
LiftMaster 041-0495-001 may be used with select LiftMaster keypads that call for this specific battery cover service kit. Public fitment information for the 041-0495-001 suffix is limited, so the best match should be made using the keypad owner's manual, keypad model number, original cover design, and service part reference.
Common compatibility checks include:
Do not assume this battery cover fits every LiftMaster keypad. Older LiftMaster keypads can use different battery doors, case shapes, battery compartments, mounting plates, and housing designs. A cover for a newer Security+ 3.0 keypad may not fit earlier keypad families, even if the keypad uses a 9V battery.
If your keypad has a different cover shape, different slide direction, different latch design, or damaged housing, confirm the correct replacement before ordering. Forcing the wrong cover onto the keypad can crack the plastic housing, damage the cover tabs, or leave the battery compartment unsecured.
The following related keypad and accessory parts should not be treated as direct substitutes unless your keypad documentation confirms the match:
| Specification | Details |
|---|---|
| Brand | LiftMaster |
| Part Number | 041-0495-001 |
| Manufacturer Description | KEYPAD, BATTERY COVER, SK, S3 |
| Product Type | Keypad battery cover service kit |
| Technology Reference | Security+ 3.0 related keypad accessory application |
| Primary Use | Replacement cover for compatible keypad battery compartment |
| Programming Required | No |
| Electrical Component | No |
| Battery Included | No, unless package contents specifically state otherwise |
| Complete Keypad Included | No, battery cover only unless listed otherwise |
| Compatibility Method | Verify by keypad model number, rear housing style, cover shape, and owner manual part reference |
If the keypad is not working, the battery cover alone will not repair the electronics. Check the battery, keypad illumination, button response, programming, opener compatibility, and wireless range separately. This service part only addresses the physical battery compartment cover.
Battery covers are often lost during battery replacement or become loose after the keypad has been removed from the wall several times. Before ordering, inspect the lower portion of the keypad housing. If the cover slide rails or latch points are broken, a replacement cover may not solve the issue. In that case, a complete keypad replacement may be the better repair.
Installation is normally a simple battery cover replacement when the keypad housing is undamaged. Slide or seat the cover the same way the original cover was installed. Do not pry aggressively, force the cover, or bend the plastic tabs. If replacing the keypad battery at the same time, use the battery type specified by the keypad manual and dispose of the old battery properly.
This part does not repair keypad programming, opener receiver problems, antenna issues, wall control lock mode, photo eye faults, or door reversal problems. If the keypad does not operate the garage door after a confirmed good battery and proper programming, diagnose the keypad, opener logic board, receiver, antenna, and safety systems separately. Do not bypass photo eyes, door reversal systems, or opener safety circuits during testing.
No. LiftMaster 041-0495-001 is a keypad battery cover service kit. It is intended to replace the battery compartment cover on a compatible keypad and does not include a complete keypad unless package contents specifically say otherwise.
No. This cover should only be used with select compatible LiftMaster keypads that use the matching Security+ 3.0 style battery cover. Verify the keypad model, cover shape, and manual before ordering.
Do not assume the 001 and 000 suffixes are identical without confirmation. They appear to be closely related keypad battery cover numbers, but packaging, service-kit labeling, or fitment differences should be verified before substituting one for the other.
No. This item is listed as a battery cover service kit, not a keypad battery. Confirm current package contents before ordering if you also need a replacement battery.
No. A battery cover will not repair a dead keypad. If the keypad does not light up, check the battery, battery leads, internal corrosion, and keypad condition before ordering a cover.
Not unless the keypad documentation confirms the same cover style. Older LiftMaster keypad families may use different housings and battery doors that are not interchangeable with newer Security+ 3.0 keypad covers.
Check the keypad model number, original battery cover shape, slide direction, rear housing condition, and owner manual part reference. If the keypad housing is cracked, the new cover may not stay attached.
Only if the keypad documentation confirms the same compatible battery cover style. Some Chamberlain Group keypad families share related parts, but battery covers are not automatically interchangeable across all models.