LiftMaster 41C5498 Low Voltage Wire Harness Kit

41C5498 Low Voltage Wire Harness Kit for AC Chain Drive Openers

The LiftMaster 41C5498 wire harness is used inside select AC chain-drive opener powerheads to restore the low-voltage wiring path. A low-voltage harness can be damaged by age, service work, pinched wires, rodents, corrosion, or a shorted accessory circuit. Symptoms may include intermittent wall-control operation, safety sensor wiring trouble, unreliable accessory connections, or visible harness damage. This is not the line-voltage harness and should not be substituted for high-voltage harness numbers. The correct harness must match the opener board connector, lead length, and routing so the low-voltage circuits remain properly separated and secured.

Compatible With

For use with select LiftMaster and Chamberlain AC chain drive garage door openers manufactured after 2001 that specify 041C5498 or 41C5498 in the replacement parts diagram. Supplier references also associate this part with select Craftsman/Chamberlain Group openers that call out 41C5498, with one noted caution that harness length may differ on some Craftsman applications such as 139.53985D. Verify original harness length and connector layout before ordering.

Features and Specifications

Also Known As / Related Part Numbers

• 041C5498
• 41C5498
• LiftMaster 41C5498
• Chamberlain 041C5498
• Low voltage wire harness
• AC chain drive low voltage harness
• 18A-41C5498
• Garage opener low voltage harness

Technician Note

Low-voltage harness damage can be caused by a shorted accessory, pinched sensor wire, or control-board issue. Inspect connected field wiring before replacing the harness.

Before Ordering Checklist

• Verify the opener is an AC chain drive model that lists 41C5498.
• Confirm the opener was manufactured after 2001 if using manufacturer compatibility wording.
• Compare connector layout and wire length with the original harness.
• Do not substitute a high-voltage harness for this part.
• Inspect wall-control and safety sensor wiring for shorts or corrosion.

Professional Advisory

Do not bypass photo eyes or safety circuits to compensate for wiring problems. If low-voltage wiring faults keep returning, a qualified technician should inspect the entire control circuit.

Important Ordering Warnings

• This is a low-voltage harness, not a high-voltage power harness.
• Some related Chamberlain/Craftsman applications may have harness-length concerns, so compare the original part before ordering.

Product Questions and Answers

What type of opener uses 41C5498?

Manufacturer references list 041C5498 for select LiftMaster and Chamberlain AC chain drive garage door openers manufactured after 2001.

Is 41C5498 a high-voltage harness?

No. It is a low-voltage wire harness kit and should not be substituted for high-voltage harnesses.

Can this harness affect wall control or safety sensor operation?

Yes, if the original harness is damaged or has poor connections, it may affect low-voltage controls depending on the opener design.

Will 41C5498 fit Craftsman openers?

It may fit select Craftsman/Chamberlain Group models that list 41C5498, but connector layout and harness length should be checked.

What should I inspect before replacing the harness?

Check the original part number, connector shape, wire routing, low-voltage field wiring, safety sensor wiring, and logic board condition.