The LiftMaster 50800 RBMA electric treadle is used for vehicle activation in commercial door and access control applications. When a vehicle passes over the treadle, the weight compresses the internal switch and sends a signal to the operator control circuit.
This is an electric treadle, not a pneumatic hose kit. It is suited for applications where a physical vehicle-actuated switch is preferred and where the operator input supports the intended open or safety function.
| Feature / Specification | Details |
|---|---|
| Manufacturer | LiftMaster |
| Product Type | RBMA electric treadle |
| Part Number | 50800 |
| Application | Vehicle-actuated commercial door or access control input |
| Enclosure | NEMA 4/12 outdoor enclosure |
| Connection | 2-wire connection to compatible operator input |
| Power Requirement | No power required at the treadle switch |
| Activation Method | Vehicle weight compresses electric switch |
| Model | RBMA |
| Notes | Use only with approved control wiring and required safety devices |
Electric treadles and pneumatic treadles are serviced differently. Confirm the original system type before ordering parts, especially on older commercial door installations.
Vehicle treadle wiring can affect automatic door movement. A qualified technician should verify control wiring, safety inputs, and door operation before the system is placed back into service.
A vehicle compresses the treadle switch, and that switch sends a signal to the connected operator input.
The treadle switch does not require power at the treadle. It uses a 2-wire switch connection to a compatible operator input.
No. The 50800 is an electric treadle. The 658206 uses a pneumatic hose, air switch, and outdoor enclosure.
It is listed with a NEMA 4/12 outdoor enclosure, but the installation still needs proper mounting, wiring protection, and drainage for the site.
No. This is a vehicle activation or control device. It does not replace monitored photo eyes, sensing edges, or required entrapment protection.