Liftmaster K10-50154, HEAD BRACKET, Q096

Liftmaster K10-50154, HEAD BRACKET, Q096

LiftMaster K10-50154, also known as Q096, is a replacement head bracket for select LiftMaster HCT overhead gate operators and related Elite Hercules overhead operator references. The bracket supports the operator head area and helps maintain proper alignment between the operator assembly and connected overhead gate hardware.

A head bracket may need replacement if it is bent, cracked, corroded, missing, or damaged by impact or improper service. Since this component is part of the operator's structural support area, correct fitment is important for reliable operation and cover/hardware alignment.

K10-50154 should be matched by both the K10 part number and the Q096 reference where applicable. Do not assume it is interchangeable with Q093 idler cover, Q097 mounting plate, or other HCT bracket parts.

Compatible With

Common Compatible Models

• LiftMaster Model HCT overhead gate operators
• LiftMaster HCTDCU overhead gate operators where Q096 is shown
• LiftMaster HCTDCULMC references where Q096 is shown
• LiftMaster HCT5011O3 references where Q096 is shown
• Elite Hercules overhead gate operators when the parts diagram calls out Q096

Additional Model Families to Verify

• LiftMaster / Elite overhead trolley systems using the Q096 head bracket

Important Compatibility Notes

• This is a head/header bracket, not a cover or mounting plate.
• Verify Q096 against the original parts breakdown.
• Do not interchange with Q093 or Q097 without manufacturer confirmation.

Also Known As / Related Part Numbers

• K10-50154
• 10-50154
• LM-K10-50154
• Q096
• Elite Q096
• LiftMaster K10-50154
• Header bracket Q096
• Head bracket Q096

Features & Specifications

Technician Note

When replacing a head bracket, look for signs of impact, loose mounting hardware, or operator misalignment. A failed bracket may be related to a larger mechanical issue.

Before Ordering Checklist

• Confirm K10-50154 or Q096 in the parts diagram.
• Verify whether the operator is HCT, HCTDCU, HCTDCULMC, or a related Elite Hercules model.
• Compare bracket hole pattern and shape.
• Inspect connected structural hardware before reinstalling.
• Do not reuse damaged fasteners on a load-support bracket.

Professional Advisory

A head bracket is part of the operator support structure. For overhead gate systems, bracket replacement should be handled by trained personnel familiar with gate hardware loads and safe service procedures.

Important Ordering Warnings

• Do not substitute another Q-series bracket unless the parts diagram confirms it.
• Do not operate an overhead gate operator with a damaged head support bracket.

Product Questions & Answers

What is the alternate number for K10-50154?

K10-50154 is commonly associated with alternate reference Q096.

What does the head bracket do?

The head bracket helps support or align the operator head area on compatible HCT overhead gate operator installations.

Which models are commonly referenced?

Supplier references list LiftMaster Model HCT overhead gate operators, HCTDCU, HCTDCULMC, and HCT5011O3 references where Q096 is called out.

Is this part used on Elite Hercules operators?

Some supplier references identify Q096 for LiftMaster HCT and Elite Hercules overhead gate operators. Verify by parts diagram before ordering.

Can I substitute another HCT bracket?

No. Other HCT brackets and plates may look similar but can have different hole patterns, load points, and mounting locations.