The LiftMaster K41-0085-000 clutch assembly is a mechanical service component for the HDSW24UL heavy-duty swing gate operator. This operator is designed for large commercial swing gate applications, so the clutch/linkage area must handle high torque while protecting the drive system from abnormal force and mechanical stress. A worn or damaged clutch assembly can contribute to slipping, rough movement, poor torque transfer, or unusual mechanical noise. Because some supplier descriptions use the spelling "cludge assembly," the safest way to identify this part is by the K41-0085-000 part number and the HDSW24UL parts diagram rather than the wording alone.
| Manufacturer | LiftMaster |
|---|---|
| Product Type | Clutch assembly / cludge assembly service kit |
| Part Number | K41-0085-000 |
| Application | Mechanical drive service for heavy-duty swing gate operator |
| Compatible Operator Type | Heavy-duty commercial swing gate operator |
| Primary Model Reference | HDSW24UL |
| Notes | Some listings use the wording cludge assembly; verify by part number |
This part is commonly associated with the following LiftMaster operator models or product families. Always verify by the original part number, operator model, suffix, and parts diagram before ordering.
Do not use this part to compensate for a dragging gate or incorrect arm geometry. Mechanical binding should be corrected before a replacement clutch assembly is installed.
Heavy-duty gate operator repairs should be performed by a qualified gate technician when electrical power, battery wiring, high-load gate movement, or safety-device circuits are involved. Do not bypass monitored entrapment protection devices to make an operator run.
Some supplier listings use the wording cludge assembly, but it is commonly treated as the HDSW24UL clutch/linkage service assembly.
No strong compatibility references were found for HDSL24UL. It is written for HDSW24UL swing gate applications.
Slipping, rough torque transfer, abnormal mechanical noise, or damaged clutch/linkage hardware can point to this area.
Not by itself. A hard-moving gate may have hinge, geometry, or gate-frame problems that must be corrected first.
No. HDSW24UL heavy-duty parts should not be substituted with CSW-series parts by appearance.