LiftMaster K41-0104-000 Faceplate Kit for CAPXL and CAPXLV

LiftMaster K41-0104-000 Faceplate Kit for CAPXL and CAPXLV

The LiftMaster K41-0104-000 faceplate kit is a factory-style front panel service kit for CAPXL and CAPXLV access control systems. On these connected entry systems, the faceplate is the part users touch and see every day, but it also helps protect and position the display and front access components. A damaged faceplate can make the system look worn, prevent the door from closing properly, affect the gasketed seal, or create trouble around the lock and display opening. K41-0104-000 is a good match when the existing CAPXL/CAPXLV cabinet and electronics are serviceable but the front faceplate needs replacement. Because CAPXL parts are generation-specific in some cases, compare the installed unit with the LiftMaster service diagram before ordering.

Compatible With

• LiftMaster CAPXL Connected Access System
• LiftMaster CAPXLV Connected Access System when confirmed by parts diagram
• CAPXL/CAPXLV front-panel repairs where K41-0104-000 is listed as the faceplate replacement kit
• High-capacity access control systems with the matching cabinet and display layout
• Not for IPAC, EL2000SS, EL25, EL1SS, or other entry systems unless documentation specifically calls for K41-0104-000

Features & Specifications

Also Known As / Related Part Numbers

• K41-0104-000
• 41-0104-000
• K410104000
• O2-K41010400
• LM-K41-0104-000
• LiftMaster CAPXL faceplate kit
• LiftMaster CAPXLV faceplate kit

Technician Note

If the original faceplate is damaged around the screen or lock area, check the display assembly, camera/window area, gasket, and lock hardware. Replacing only the faceplate may not correct a water leak or closure issue if the rear housing is bent.

Before Ordering

• Confirm the system model is CAPXL or CAPXLV.
• Compare the faceplate style to the installed unit and service diagram.
• Inspect the display, lock, gasket, hinges, and rear housing for related damage.
• Verify whether this is a faceplate-only kit or a faceplate/display assembly is needed.
• Do not order by appearance alone if the entry system has been previously modified.

Professional Advisory

Outdoor access control systems must be sealed and grounded correctly after cabinet service. If wiring, power, network connections, or internal boards must be removed, service should be handled by a qualified technician.

Product Questions & Answers

What does K41-0104-000 replace?

K41-0104-000 replaces the faceplate on select LiftMaster CAPXL and CAPXLV connected access systems.

Is K41-0104-000 the same as K76-38327?

They are related CAPXL faceplate service references but should not be assumed interchangeable without checking the exact parts diagram and installed unit generation.

Does this kit include the touchscreen display?

This item is listed as a faceplate kit. If the display is damaged, compare against the faceplate-with-display kit before ordering.

Can a damaged gasket cause the faceplate to fail?

Yes. A bad gasket, bent housing, or misaligned hardware can prevent a new faceplate from sealing or closing correctly.

Will this fit an IPAC system?

No. IPAC systems use different touchscreen and frame parts. Use IPAC-specific parts such as IPACTSK or IPACLCDK when the IPAC diagram calls for them.