The LiftMaster K75-50247 cover is a replacement enclosure cover for select LiftMaster CSW UL commercial swing gate operator models. The cover protects the motor, gearbox area, control components, wiring, and internal hardware from rain, sun exposure, debris, and jobsite damage. A broken, missing, or badly weathered cover can shorten the life of the operator by allowing moisture and dirt into the cabinet. This part is commonly referenced as Elite Q244 and may appear in parts lists near Q246 references, but fitment is still based on the exact CSW operator model and cover style. It is best matched by comparing the existing cover and checking the operator parts diagram.
This part is best suited for service work where the operator has already been identified and the original part location is known. On older LiftMaster and Elite gate operators, small differences in production date, UL listing generation, enclosure style, arm geometry, or mounting hardware can change which replacement part is correct. For that reason, this product page uses careful compatibility language and includes the common related numbers customers may use when searching for the part.
Compatibility note: CSW covers can vary by model generation, UL version, and material. Do not assume every CSW cover is interchangeable.
| Manufacturer | LiftMaster |
|---|---|
| Product Type | Operator Cover |
| Part Number | K75-50247 |
| Also Known As | K75-50247, 75-50247, Q244, Q246, Elite Q244 |
| Application | Replacement enclosure cover for CSW UL commercial swing gate operators |
| Compatible Operator Type | Various LiftMaster CSW Series commercial swing gate operator models; CSW UL operator applications that specify K75-50247, Q244, or in some references Q246. Commonly associated with CSW200UL-style covers where the parts diagram confirms the number. |
| Reference Number | Q244 |
| Notes | Verify by model number, original part number, and parts diagram before ordering. |
When replacing this part, inspect the surrounding brackets, fasteners, bushings, pivots, wiring, covers, seals, and drive hardware in the same assembly. A failed support part can sometimes be caused by a misaligned gate, loose mounting hardware, worn clutch parts, or a cabinet that has been exposed to water or debris. Replacing only the visible damaged part without correcting the cause can lead to repeat failures.
Commercial gate operators can move heavy gates and may contain high-voltage wiring, stored mechanical force, or pinch points. Mechanical service should be performed with the gate secured and the operator power disconnected by a qualified technician when needed. Do not bypass monitored safety devices or operate a damaged gate system without proper safety protection.
CSW covers can vary by model generation, UL version, and material. Do not assume every CSW cover is interchangeable.
The LiftMaster K75-50247 is a replacement operator cover used for replacement enclosure cover for csw ul commercial swing gate operators. It is ordered when the original part is worn, damaged, missing, or no longer functioning correctly.
Yes. Q244 is the common Elite or LiftMaster reference number associated with K75-50247. Related search numbers may appear in parts lists, but the installed operator diagram should still be checked.
K75-50247 is commonly associated with Various LiftMaster CSW Series commercial swing gate operator models; CSW UL operator applications that specify K75-50247, Q244, or in some references Q246. Commonly associated with CSW200UL-style covers where the parts diagram confirms the number. Use the exact operator model and parts diagram to confirm final fitment.
Check the operator model, original part number, Q-number, mounting style, hardware condition, and any model suffix or production-date notes that apply to the installed unit.
No. K75-50247 should not be treated as a universal LiftMaster gate operator part. Similar-looking covers, arms, latches, clutch parts, and hardware kits may use different dimensions or mounting points.