Liftmaster 041D9491, END PANEL

Liftmaster 041D9491, END PANEL

The LiftMaster 041D9491 is an end panel and logic board replacement kit for select residential belt drive garage door openers. It is commonly referenced for post-2016 opener designs and some Craftsman garage door opener service applications.

Because this part involves the opener's electronics and end-panel configuration, compatibility must be confirmed by model number, board layout, and parts diagram. It should not be treated as a universal end cap or a universal logic board.

Common Replacement Reasons

• Opener will not accept remote or keypad programming after normal troubleshooting.
• End panel or board area is physically damaged.
• Receiver or opener control functions are unreliable.
• Parts diagram lists 041D9491 as the service kit.

Features & Specifications

Compatible With

Common Compatible Applications

• Select residential belt drive garage door openers manufactured after 2016 where 041D9491 is listed.
• Select Craftsman-branded garage door openers using the same service kit reference.
• Openers whose replacement parts diagram identifies 041D9491 as the end panel / logic board kit.

Additional Model Families to Verify

• Post-2016 Chamberlain Group belt drive opener families.
• Related Wi-Fi or Security+ 2.0 opener designs only when the parts diagram confirms this board.

Important Compatibility Notes

• Not a universal cover or end cap.
• Logic boards must match opener model, motor type, travel system, and accessory technology.
• After replacement, remotes, keypads, travel limits, and force settings may need to be reprogrammed according to the opener manual.

Also Known As / Related Part Numbers

• 041D9491
• 41D9491
• End Panel Logic Board Kit 041D9491
• Craftsman end panel and logic board kit reference

Technician Note

Before replacing a logic board, confirm the opener has proper power, intact wiring, working safety sensors, and no motor or travel-module fault. Board replacement may require reprogramming accessories and travel settings.

Before Ordering Checklist

• Confirm the opener model and manufacture period.
• Confirm the parts diagram lists 041D9491.
• Compare the board connectors and end-panel layout to the original part.
• Plan to reprogram remotes, keypads, and travel limits after replacement.
• Disconnect power before opening the opener housing.

Professional Advisory

Logic board replacement involves electrical components and opener setup. If the opener has surge damage, burned board traces, or unsafe door movement, use a qualified garage door technician.

Product Questions and Answers

Is 041D9491 only an end panel?

Manufacturer references describe it as an end panel and logic board kit, so confirm whether your application requires the complete service assembly.

What openers use 041D9491?

It is used on select residential belt drive garage door openers, especially post-2016 applications where the parts diagram lists this kit.

Will I need to reprogram my remotes after replacing it?

Yes, logic board replacement usually requires remote, keypad, and sometimes travel-limit programming.

Can I use this on a chain drive opener?

Do not assume that. The strongest references point to select belt drive openers. Verify by parts diagram.

What failures can this kit address?

It may address receiver, board, or end-panel damage when the opener model calls for this exact service kit.