The LiftMaster K010A0014 is a 12V battery for various LiftMaster and Chamberlain remote controls and wireless accessories. It provides operating power to the handheld or accessory device, so symptoms of a weak battery can include short operating range, intermittent button response, dim indicator lights, or no response from the accessory. This part should not be confused with larger 12V opener backup batteries used inside battery backup garage door openers. The K010A0014 is a small accessory battery and should be matched by battery number, voltage, shape, polarity, and the accessory owner manual.
For use with various LiftMaster and Chamberlain remote controls and accessories that specify K010A0014 or a matching 12V accessory battery. Verify by the old battery, battery compartment marking, or accessory manual.
| Manufacturer | LiftMaster / Chamberlain Group |
|---|---|
| Product Type | Remote control / accessory battery |
| Part Number | K010A0014 |
| Voltage | 12V DC |
| Battery Type | Alkaline accessory battery |
| Application | Various LiftMaster and Chamberlain remote controls and accessories |
| Notes | Not an opener battery backup battery |
If range problems continue after replacing the battery, inspect the remote buttons, receiver antenna, opener logic board, and local radio interference before replacing additional parts.
Small battery replacement is usually straightforward, but battery leakage or corrosion can damage a remote or accessory. Replace damaged accessories rather than forcing unreliable controls back into service.
K010A0014 is a 12V alkaline replacement battery used with various LiftMaster and Chamberlain remote controls and accessories.
Related numbers include 010A0014, 100101, 10A14, and OS100101.
No. This is a small accessory/remote battery, not a sealed lead-acid garage door opener battery backup.
Open the remote or accessory and match the battery number, voltage, and polarity shown in the owner manual or battery compartment.
The accessory may not power up, may have poor range, or may be damaged if voltage or polarity is wrong.