LiftMaster OES-RD16 16 Foot Rolling Door Optical Edge Kit

LiftMaster OES-RD16 16 Foot Rolling Door Optical Edge Kit

The LiftMaster OES-RD16 is a monitored optical edge kit for compatible commercial rolling doors. It combines a rolling door rubber edge profile with optical sensing components for use on select LiftMaster commercial door operator installations.

What This Part Does

This kit is used when a rolling door or grille needs a monitored bottom edge. It helps the compatible operator detect an obstruction at the closing edge while maintaining a flexible edge profile suitable for rolling door applications.

Compatible With

This LiftMaster OES component is commonly used with select LiftMaster commercial door operator installations that require monitored entrapment protection. Compatibility depends on door type, edge profile, operator safety input, and the installed OES system components.

• Select LiftMaster Logic 5.0 commercial door operators used on rolling doors
• Select LiftMaster MAXUM commercial door operators used on rolling doors
• Select heavy-duty and industrial LiftMaster commercial door operators
• Compatible commercial rolling doors and grilles requiring a 16 foot optical edge kit
• Applications where a monitored rolling door edge is required

Important Compatibility Notes

• Use sectional door OES parts only on compatible sectional door applications.
• Use rolling door OES parts only on compatible rolling door applications.
• Do not mix edge profiles, sensor kits, mounting kits, or wiring components unless the LiftMaster OES instructions support the combination.
• The commercial operator must support the required monitored edge input for the installation.
• All safety devices should be tested after installation before the door is returned to service.

Features & Specifications

Also Known As / Related Part Numbers

This part may be searched under related LiftMaster OES names or nearby component numbers. Related numbers are not always interchangeable, especially when the door type or edge length is different.

• OES-RD16
• LiftMaster OES-RD16
• 16 foot rolling door edge kit
• OES-RD50, related rolling door edge roll
• OES-RDCK, rolling door mounting kit
• OES-SD16, related sectional door kit

Technician Note

Match the OES component to the door type and the original installation, not just the LiftMaster brand name. Sectional door edges, rolling door edges, sensor kits, coil cords, junction boxes, and mounting kits work together as a monitored safety system. A similar-looking component may not be correct if the edge profile, door style, wiring, or operator input is different.

Before Ordering, Confirm

• Original LiftMaster OES part number or kit number
• Door type: sectional overhead door or rolling door/grille
• Required edge length or field-cut edge material
• Existing optical sensor, junction box, coil cord, and mounting hardware condition
• Commercial operator model and monitored edge input requirements
• Whether the job requires one replacement component or a complete OES kit

Professional Advisory

Optical edge systems are safety-related components on commercial doors. Installation, wiring, adjustment, and testing should be performed by a qualified commercial door technician. Do not bypass a monitored safety edge or operate a commercial door with missing, damaged, or untested entrapment protection.

Important Ordering Warnings

• Do not assume sectional and rolling door OES parts interchange.
• Do not use rubber edge material alone when the installation requires sensors, wiring, and monitoring components.
• If the operator displays a monitored edge fault, inspect wiring, sensor alignment, coil cord, and junction box before replacing parts.
• Confirm package contents because some OES listings are complete kits while others are individual replacement components.

Questions & Answers

What is the OES-RD16 used on?

The OES-RD16 is used on select commercial rolling doors and grilles that require a 16 foot monitored optical edge system.

How is OES-RD16 different from OES-SD16?

OES-RD16 is designed for rolling door edge applications, while OES-SD16 is designed for sectional door edge applications.

Does the OES-RD16 include sensor parts?

Yes. The kit typically includes the rubber edge, transmitter and receiver optical sensors, coil cord, junction box, edge connection kit, and instructions.

Can this be used as a monitored entrapment device?

Yes, when installed with a compatible LiftMaster commercial operator that supports the monitored optical edge input.

What should be checked before ordering OES-RD16?

Confirm the door is a rolling door, the edge length is correct, the operator supports monitored edge inputs, and the mounting hardware matches the door construction.