The Linear / Nice KFB125-H 830-00440 package contains 25 passive 125 kHz proximity key fobs for select HID-compatible access-control readers. Each credential uses the standard 26-bit format and is housed in a sturdy off-white ABS plastic body for convenient key-ring use.
When the fob is presented near a compatible reader, the reader obtains the credential data and sends it to the access controller. The controller then checks the enrolled facility code, credential number, user record, access level, schedules, and door permissions before granting or denying access.
The KFB125-H provides a compact physical credential for employees, residents, tenants, contractors, vendors, and other authorized users. It offers the convenience of a key-fob form factor without requiring a user-replaceable battery.
This product is an access credential only. It is not a reader, standalone controller, gate remote, garage-door transmitter, Bluetooth credential, or output relay.
Exact compatibility depends on both the reader and the access controller. A reader may detect the fob while the controller still rejects it because of an unsupported format, incorrect facility code, duplicate card number, disabled user record, or access-level restriction.
Part number 830-00440 is the standard 26-bit KFB125-H credential package. The custom-format alternative is part number 830-0044C.
The official product page does not publish the facility code or credential-number range assigned to standard part number 830-00440. Verify that information from the package or supplier record before adding the fobs to an existing database.
Do not order by frequency and bit format alone. Two 26-bit credential batches can still use different facility codes or overlapping credential numbers.
KFB125-H uses 125 kHz RFID technology intended for select HID-compatible proximity readers. "HID-compatible" does not mean that the fob is guaranteed to operate with every HID-branded reader, every multi-technology reader, or every controller connected to an HID reader.
The reader must support the credential technology, and the controller must be configured for the supplied format. Confirm the reader model, controller format, facility code, and credential-number range before ordering.
Nice/Linear publishes a contactless read range of up to approximately 3.5 inches. Actual read distance can vary with the reader model, mounting surface, nearby metal, electrical interference, credential orientation, and installation conditions.
Do not guarantee the maximum range at every location. Metal mullions, steel posts, operator cabinets, and reader mounting plates can reduce performance.
Each KFB125-H fob must be enrolled into the access-control database before it can grant access. Record the facility code and credential number, then assign the fob to the correct user and permissions.
| Specification | Details |
|---|---|
| Brand | Linear / Nice |
| Model | KFB125-H |
| Part Number | 830-00440 |
| Product Type | Proximity access-control key fob |
| Credential Technology | HID-compatible 125 kHz RFID |
| Operating Frequency | 125 kHz |
| Credential Format | Standard 26-bit |
| Facility Code | Verify from the current package or supplier record |
| Credential Numbers | Verify before enrollment |
| Package Quantity | 25 key fobs |
| Published Read Range | Up to approximately 3.5 inches |
| Material | ABS plastic |
| Color | Off-white |
| Battery Required | No |
| Reader Compatibility | Select HID-compatible 125 kHz proximity readers |
| Associated Linear Readers | BT125-W and NBT125-W, subject to complete system verification |
| Reader-to-Controller Interface | Commonly used with Wiegand-compatible reader and controller systems |
| Part Number Marking | Part number printed on each fob |
| Custom-Format Alternative | KFB125-H custom, part number 830-0044C |
| Reader Included | No |
| Access Controller Included | No |
| Enrollment Required | Yes |
A reader, access controller, wiring, power supply, credential programming, controlled door hardware, gate interface, and installation services are not included.
Credential enrollment and access-level programming should be completed by an authorized administrator or qualified access-control technician. Test each fob at every assigned reader and confirm that schedules, access levels, expiration dates, door permissions, and audit records operate correctly.
Immediately disable credentials that are lost, stolen, returned, or assigned to users who no longer require access. Access credentials must not bypass free-egress hardware, emergency release, fire access, mechanical override, or other required life-safety provisions.
The package contains 25 standard 26-bit, 125 kHz HID-compatible proximity key fobs. Readers, controllers, wiring, and credential enrollment are not included.
KFB125-H is designed for select HID-compatible 125 kHz proximity readers. Linear BT125-W and NBT125-W readers are commonly associated with this credential family, but the complete reader and controller configuration must be verified.
No. The reader must support the applicable 125 kHz HID-compatible credential technology, and the controller must accept the supplied 26-bit format, facility code, and credential-number range.
Part number 830-00440 is the standard 26-bit version. Verify the facility code and credential-number range from the package or supplier record before enrollment.
Nice/Linear lists a contactless read range of up to approximately 3.5 inches. Actual range varies with the reader, mounting surface, nearby metal, credential orientation, and site conditions.
No. KFB125-H is a passive 125 kHz proximity credential and does not require a user-replaceable battery.
No. Each fob must be added to the controller and assigned the correct user, doors, schedules, access level, and expiration settings.
Part number 830-00440 is the standard 26-bit KFB125-H package. Part number 830-0044C is the custom-format version for systems requiring another credential configuration.