The NICE Apollo 10028290 is an OEM-style surge board bracket used to hold the surge protection board in place inside select Apollo gate operator control enclosures. On older Apollo installations, small internal mounting parts are often damaged during board service, corrosion repair, lightning/surge repairs, or enclosure rebuilds. This bracket is not the surge board itself; it is the mechanical support that helps keep the board properly mounted, spaced, and protected inside the operator cabinet. Correct bracket fit matters because a loose or improvised board mount can allow vibration, wire strain, or contact with nearby metal parts. This item is most often associated with Apollo 3500 and 7500 operator families, including B-series references, where the internal board layout matches the original parts diagram.
This part is best ordered by the manufacturer part number and the operator parts diagram, not by appearance alone. Many Apollo slide and swing gate operators use similar covers, chains, brackets, and small service components, but the correct replacement can depend on operator model, cabinet generation, chain pitch, cable routing, mounting hole pattern, or release hardware. When the gate has been modified, rebuilt, or serviced with older Apollo parts, compare the original part and the model label before ordering.
Apollo 3500 swing gate operator; Apollo 3500B; Apollo 7500 slide gate operator; Apollo 7500B; select 3500/7500 style Apollo operator enclosures that use the same surge board bracket location. Verify by parts diagram and existing bracket pattern before ordering.
| Manufacturer | NICE / Apollo |
|---|---|
| Product Type | Surge board mounting bracket |
| Part Number | 10028290 |
| Application | Internal bracket for surge protection board mounting |
| Compatible Operator Type | Select Apollo swing and slide gate operators |
| Material / Finish | Metal bracket; finish may vary by production run |
| Notes | Bracket only. Surge board, wiring, hardware, and control board are separate unless your inventory kit states otherwise. |
10028290, NICE-10028290, Apollo 10028290, surge board bracket, surge protection board bracket, bracket surge board F/35/7500/B
For slide operator chains and covers, inspect sprockets, mounting holes, chain alignment, debris buildup, and cabinet condition before replacing the part. For brackets and release parts, check the mounting geometry and any worn hardware that may have caused the original failure. Do not bypass safety devices or operate a gate with exposed moving parts after service.
Gate operator repairs should be performed with power secured and with the gate safely supported. Electrical diagnosis, control-board service, and any repair involving unsafe gate movement should be handled by a qualified gate technician.
The 10028290 is the bracket used to mount the surge board. It is not the surge protection board itself.
It is commonly associated with Apollo 3500, 3500B, 7500, and 7500B operator applications where the enclosure and surge board mounting pattern match.
No. Internal bracket spacing and board layout can vary by operator series and generation. Match the original bracket, enclosure, and parts diagram before ordering.
It may be replaced when the original bracket is bent, missing, corroded, or removed during surge board or control box repair.
No. The listing should be treated as the bracket only unless the product package is separately confirmed as a kit.