NICE / APOLLO 75980085, STANDOFF 6-32 1/4X1 STAINLESS

NICE / APOLLO 75980085, STANDOFF 6-32 1/4X1 STAINLESS

The Nice Apollo 75980085 is a stainless 6-32 standoff used as internal mounting hardware in compatible Apollo/Nice assemblies. Standoffs are often used to mount circuit boards, brackets, or small internal components at the correct spacing from the enclosure or mounting plate. The correct height helps protect the board from shorting against metal and gives wiring and connectors the clearance they need.

Although this is a small hardware item, the dimensions matter. The uploaded part description identifies it as 6-32 thread, 1/4 x 1 inch stainless. It should be matched to the exact Apollo parts diagram or original hardware. Do not substitute a different length, thread, or material unless the installation documentation allows it, especially around circuit boards and control-box components.

Compatible With

• Select Nice Apollo control box or internal component mounting applications requiring 75980085
• Apollo circuit-board mounting or bracket mounting locations using 6-32 stainless standoff hardware
• 1050 retrofit or enclosure service contexts only when the parts diagram calls for this standoff
• Not a universal replacement for all Apollo standoffs
• Not a replacement for screws, hinges, latch hardware, or cabinet spacers of different length/thread

Features and Specifications

Also Known As / Related Part Numbers

• 75980085
• Nice Apollo 75980085
• Apollo stainless standoff
• 6-32 1/4 x 1 standoff
• Standoff 6-32 1/4X1 stainless

Technician Note

When replacing board standoffs, check for missing insulating washers, loose hardware, corrosion, and board flex. A board mounted too close to the enclosure can short or stress solder joints.

Before Ordering Checklist

• Confirm the parts diagram calls for 75980085.
• Match the thread size, length, and standoff diameter.
• Verify whether stainless hardware is required.
• Inspect the board or bracket for cracked mounting holes.
• Do not overtighten into plastic, board, or thin cabinet material.

Professional Advisory

Disconnect power before servicing control-box hardware. If a board has burn marks, corrosion, or shorting damage, have the operator inspected before replacing only the standoff.

Important Ordering Warnings

Different standoff heights can change board clearance and may cause shorts, wire strain, or connector interference.

Product Questions and Answers

What is 75980085?

It is a stainless 6-32 standoff listed as 1/4 x 1 inch for compatible Apollo mounting applications.

Where is this part used?

It may be used in select control box, circuit board, or internal component mounting locations where the parts diagram calls for it.

Can I replace it with any 6-32 spacer?

Not recommended. Length, material, diameter, and clearance must match the original mounting design.

Why does standoff height matter?

It keeps boards and components properly spaced from the enclosure and helps prevent shorts or connector interference.

Is this a control board?

No. This item is mounting hardware only and does not include a circuit board or wiring.