The NICE Apollo INTI2Y/A Inti 2-Channel 433.92 MHz Remote Transmitter - Yellow is a small NICE Inti transmitter used to send wireless commands to a compatible NICE 433.92 MHz receiver. It is a good choice when the site is already using NICE Era Inti, Era One, Flor, OXI, or 318N style radio equipment and needs an additional two-button remote. The two-channel layout can be used for one gate plus a second programmed command, or for two separate receiver channels when the receiver and controller support that setup.
This transmitter should be matched by radio system, not just by brand name. Many Apollo and gate operator installations have been fitted with different receiver families over the years, including 318 MHz, 300 MHz, Multi-Code, DIP-switch, and NICE 433.92 MHz systems. A NICE Inti remote will not replace every older Apollo or GTO remote unless the installed receiver is compatible with this transmitter family.
This transmitter is commonly associated with compatible NICE 433.92 MHz receiver systems, including:
Compatibility depends on the installed receiver, not just the gate opener model. Verify the receiver part number before ordering for older Apollo, GTO, Linear, or third-party installations.
| Manufacturer | NICE Apollo |
|---|---|
| Product Type | Remote transmitter |
| Part Number | INTI2Y/A |
| Remote Family | Nice Era Inti |
| Channels | 2 channel |
| Color | Yellow |
| Frequency | 433.92 MHz |
| Coding / Security | NICE rolling-code / O-Code family, commonly associated with Flor-compatible receiver systems |
| Compatible Receiver Type | NICE 433.92 MHz receiver hardware such as OXI/A, OXI, 318N, and FLOX2R when supported |
| Application | Gate, access-control, and compatible garage/gate receiver commands |
| Programming | Program to the receiver according to the receiver instructions |
| Important Note | Not a universal DIP-switch, 300 MHz, 318 MHz, or Multi-Code remote |
Common related numbers and search variations include:
If a new Inti remote will not program, check the receiver model and memory status first. A gate operator can be a NICE Apollo operator but still have a different receiver installed in the cabinet, especially on older retrofits or systems serviced over multiple years.
Remote programming is low voltage, but receiver installation or cabinet troubleshooting can expose high-voltage wiring inside gate operators. Use a qualified technician for receiver replacement, access-control rewiring, or unsafe gate behavior.
The INTI2Y/A is for compatible NICE 433.92 MHz receiver systems, commonly including OXI/A, OXI, 318N, FLOX2R, and related NICE Flor / Era receiver families when programmed correctly.
Not automatically. The Inti transmitter is a NICE 433.92 MHz rolling-code style remote. Older Apollo, GTO, Multi-Code, or DIP-switch radio systems may require a different transmitter or a compatible NICE receiver upgrade.
The color versions are mainly identification and preference choices within the Inti 2-channel family. Compatibility is still determined by the receiver frequency and coding family, not by the color of the case.
Yes, when the receiver and controller are set up for it. Each button can be associated with a receiver output or command depending on the receiver channel count and programming method.
Check the existing receiver model, frequency, coding type, and current remote part number. Also confirm whether the site needs one channel or two and whether the receiver has available memory for another transmitter.